Search

These motors are simple DC Motors featuring gears for the shaft for obtaining the optimal performance characteristics. They are known as Center Shaft DC Geared Motors because their shaft extends through the center of their gearbox assembly.

These standard size DC Motors are very easy to use. Also, you don’t have to spend a lot of money to control motors with an Arduino or compatible board. The L298N H-bridge module with an onboard voltage regulator motor driver can be used with this motor that has a voltage of between 5 and 35V DC.

This DC Motor – 500 RPM – 12 Volts can be used in all-terrain robots and a variety of robotic applications. These motors have a 3 mm threaded drill hole in the middle of the shaft thus making it simple to connect it to the wheels or any other mechanical assembly.

Nut and threads on the shaft to easily connect and internally threaded shaft for easily connecting it to the wheels.

These DC Geared motors with robust metal/Plastic gearbox for heavy-duty applications, available in the wide RPM range(Check the list below) and ideally suited for robotics and industrial applications.

Note: Depending upon the Manufacturer given dimensions may vary in the range of ±5%.

Features: 

• It comes with High-Quality Metal Gears
• The metal gears have better wear and tear properties
• The gearbox is sealed and lubricated with lithium grease and requires no maintenance
• Although the motor gives 300 RPM at 12V, the motor runs smoothly from 4V to 12V and gives a wide range of RPM, and torque
• The shaft has a hole for better coupling

Package Includes:

1 x 12 Volts DC Motor - 500 RPM

These motors are simple DC Motors featuring gears for the shaft for obtaining the optimal performance characteristics. They are known as Center Shaft DC Geared Motors because their shaft extends through the center of their gearbox assembly.

These standard size DC Motors are very easy to use. Also, you don’t have to spend a lot of money to control motors with an Arduino or compatible board. The L298N H-bridge module with an onboard voltage regulator motor driver can be used with this motor that has a voltage of between 5 and 35V DC.

This DC Motor – 100 RPM – 12 Volts can be used in all-terrain robots and a variety of robotic applications. These motors have a 3 mm threaded drill hole in the middle of the shaft thus making it simple to connect it to the wheels or any other mechanical assembly.

Nut and threads on the shaft to easily connect and internally threaded shaft for easily connecting it to the wheels.

These DC Geared motors with robust metal/Plastic gearbox for heavy-duty applications, available in the wide RPM range(Check the list below) and ideally suited for robotics and industrial applications.

Note: Depending upon the Manufacturer given dimensions may vary in the range of ±5%.

Features: 

• It comes with High-Quality Metal Gears
• The metal gears have better wear and tear properties
• The gearbox is sealed and lubricated with lithium grease and requires no maintenance
• Although the motor gives 100 RPM at 12V, the motor runs smoothly from 4V to 12V and gives a wide range of RPM, and torque
• The shaft has a hole for better coupling

Package Includes:

1 x 12Volt DC Motor – 100 RPM

These motors are simple DC Motors featuring gears for the shaft for obtaining the optimal performance characteristics. They are known as Center Shaft DC Geared Motors because their shaft extends through the center of their gearbox assembly.

These standard size DC Motors are very easy to use. Also, you don’t have to spend a lot of money to control motors with an Arduino or compatible board. The L298N H-bridge module with an onboard voltage regulator motor driver can be used with this motor that has a voltage of between 5 and 35V DC.

This DC Motor – 300 RPM – 12 Volts can be used in all-terrain robots and a variety of robotic applications. These motors have a 3 mm threaded drill hole in the middle of the shaft thus making it simple to connect it to the wheels or any other mechanical assembly.

Nut and threads on the shaft to easily connect and internally threaded shaft for easily connecting it to the wheels.

These DC Geared motors with robust metal/Plastic gearbox for heavy-duty applications, available in the wide RPM range(Check the list below) and ideally suited for robotics and industrial applications.

Note: Depending upon the Manufacturer given dimensions may vary in the range of ±5%.

Features: 

• It comes with High-Quality Metal Gears
• The metal gears have better wear and tear properties
• The gearbox is sealed and lubricated with lithium grease and requires no maintenance
• Although the motor gives 300 RPM at 12V, the motor runs smoothly from 4V to 12V and gives a wide range of RPM, and torque
• The shaft has a hole for better coupling

Package Includes:

1 x 12 Volt 300 RPM DC Motor

It is a BO Series 110RPM DC Motor Plastic Gear Motor. The BO series straight motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors.

A Small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & light weight makes it suitable for in-circuit placement. This motor can be used with 69mm Diameter Wheel for Plastic Gear Motors and 87mm Diameter Multipurpose Wheel for Plastic Gear Motors.

Low-cost geared DC Motor. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-12V and is perfect for building small and medium robots. Available with 60 and 150 RPM.

The motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car. They are commonly used in our 2WD platforms.

Features: 

• Cost-effectiveness of the injection-molding process
• Elimination of machining operations
• Low density: lightweight, low inertia
• Uniformity of parts
• Capability to absorb shock and vibration as a result of elastic compliance
• Ability to operate with minimum or no lubrication, due to inherent lubricity
• The relatively low coefficient of friction
• Corrosion-resistance; elimination of plating, or protective coatings
• The quietness of operation
• Tolerances often less critical than for metal gears, due in part to their greater resilience
• Consistency with the trend to greater use of plastic housings and other components

Package Includes:

1 x 110 RPM Half Metal Gear BO Motor – Straight

This is a TT DC Gearbox Motor with a gear ratio of 1:48, and it comes with 2 x 200mm 28AWG wires with breadboard-friendly 2.54mm(0.1”) Female connectors. DC geared motor with high-quality rubber wheels, dual shafts can be equipped with speed measurement code disk, convenient for speed measurement

A Small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & light weight makes it suitable for in-circuit placement. This motor can be used with 69mm Diameter Wheel for Plastic Gear Motors and 87mm Diameter Multipurpose Wheel for Plastic Gear Motors.

Low-cost geared DC Motor. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-12V and is perfect for building small and medium robots. Available with 60 and 150 RPM.

The motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car. They are commonly used in our 2WD platforms.

Note: These Motors are available in three different colors i.e. Yellow, Black, and white, we will ship it randomly.

Features: 

• Cost-effectiveness of the injection-molding process
• Elimination of machining operations
• Low density: lightweight, low inertia
• Uniformity of parts
• Capability to absorb shock and vibration as a result of elastic compliance
• Ability to operate with minimum or no lubrication, due to inherent lubricity
• The relatively low coefficient of friction
• Corrosion-resistance; elimination of plating, or protective coatings
• The quietness of operation
• Tolerances often less critical than for metal gears, due in part to their greater resilience
• Consistency with the trend to greater use of plastic housings and other components

Package Includes:

1 x 5V 200RPM Microbit TT DC Motor

The 100 RPM L-Shape BO Motor Plastic Gear Motor – BO series straight motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors.

Small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & light weight makes it suitable for in-circuit placement. This motor can be used with 69mm Diameter Wheel for Plastic Gear Motors and 87mm Diameter Multipurpose Wheel for Plastic Gear Motors.

Low-cost geared DC Motor. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-12V and is perfect for building small and medium robots. Available with 60 and 150 RPM.

The motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car. They are commonly used in our 2WD platforms.

Note: These Motors are available in three different colors i.e. Yellow, Black, and white, we will ship it randomly.

Features: 

• Cost-effectiveness of the injection-molding process
• Elimination of machining operations
• Low density: lightweight, low inertia
• Uniformity of parts
• Capability to absorb shock and vibration as a result of elastic compliance
• Ability to operate with minimum or no lubrication, due to inherent lubricity
• The relatively low coefficient of friction
• Corrosion-resistance; elimination of plating, or protective coatings
• The quietness of operation
• Tolerances often less critical than for metal gears, due in part to their greater resilience
• Consistency with the trend to greater use of plastic housings and other components

Package Includes:

1 x 100 RPM L-Shape BO Motor – Straight

The 300 RPM L-Shape BO Motor Plastic Gear Motor – BO series straight motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors.

Small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & light weight makes it suitable for in-circuit placement. This motor can be used with 69mm Diameter Wheel for Plastic Gear Motors and 87mm Diameter Multipurpose Wheel for Plastic Gear Motors.

Low-cost geared DC Motor. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-12V and is perfect for building small and medium robots. Available with 60 and 150 RPM.

The motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car. They are commonly used in our 2WD platforms.

Note: These Motors are available in three different colors i.e. Yellow, Black, and white, we will ship it randomly.

Features: 

• Cost-effectiveness of the injection-molding process
• Elimination of machining operations
• Low density: lightweight, low inertia
• Uniformity of parts
• Capability to absorb shock and vibration as a result of elastic compliance
• Ability to operate with minimum or no lubrication, due to inherent lubricity
• The relatively low coefficient of friction
• Corrosion-resistance; elimination of plating, or protective coatings
• The quietness of operation
• Tolerances often less critical than for metal gears, due in part to their greater resilience
• Consistency with the trend to greater use of plastic housings and other components

Package Includes:

1 x 300 RPM L-Shape BO Motor – Straight

The 100 RPM Dual Shaft BO Motor Plastic Gear Motor – BO series straight motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors.

Small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & light weight makes it suitable for in-circuit placement. This motor can be used with 69mm Diameter Wheel for Plastic Gear Motors and 87mm Diameter Multipurpose Wheel for Plastic Gear Motors.

Low-cost geared DC Motor. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-12V and is perfect for building small and medium robots. Available with 60 and 150 RPM.

The 300 RPM Dual Shaft BO Motor-Straight is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car. They are commonly used in our 2WD platforms.

Note: These Motors are available in three different colors i.e. Yellow, Black, and white, we will ship it randomly.

Features: 

• Cost-effectiveness of the injection-molding process
• Elimination of machining operations
• Low density: lightweight, low inertia
• Uniformity of parts
• Capability to absorb shock and vibration as a result of elastic compliance
• Ability to operate with minimum or no lubrication, due to inherent lubricity
• The relatively low coefficient of friction
• Corrosion-resistance; elimination of plating, or protective coatings
• The quietness of operation
• Tolerances often less critical than for metal gears, due in part to their greater resilience
• Consistency with the trend to greater use of plastic housings and other components

Package Includes:

1 x 100 RPM Dual Shaft BO Motor – Straight

It is a BO Series 1 100RPM DC Motor Plastic Gear Motor. The BO series straight motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors.

A Small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & light weight makes it suitable for in-circuit placement. This motor can be used with 69mm Diameter Wheel for Plastic Gear Motors and 87mm Diameter Multipurpose Wheel for Plastic Gear Motors.

Low-cost geared DC Motor. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-12V and is perfect for building small and medium robots. Available with 60 and 150 RPM.

The motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car. They are commonly used in our 2WD platforms.

Note: These Motors are available in three different colors i.e. Yellow, Black, and white, we will ship it randomly.

Features: 

• Cost-effectiveness of the injection-molding process
• Elimination of machining operations
• Low density: lightweight, low inertia
• Uniformity of parts
• Capability to absorb shock and vibration as a result of elastic compliance
• Ability to operate with minimum or no lubrication, due to inherent lubricity
• The relatively low coefficient of friction
• Corrosion-resistance; elimination of plating, or protective coatings
• The quietness of operation
• Tolerances often less critical than for metal gears, due in part to their greater resilience
• Consistency with the trend to greater use of plastic housings and other components

Package Includes:

1 x 100 RPM BO Motor – Straight

The 300 RPM Dual Shaft BO Motor Plastic Gear Motor – BO series straight motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors.

Small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & light weight makes it suitable for in-circuit placement. This motor can be used with 69mm Diameter Wheel for Plastic Gear Motors and 87mm Diameter Multipurpose Wheel for Plastic Gear Motors.

Low-cost geared DC Motor. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-12V and is perfect for building small and medium robots. Available with 60 and 150 RPM.

The 300 RPM Dual Shaft BO Motor-Straight is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car. They are commonly used in our 2WD platforms.

Note: These Motors are available in three different colors i.e. Yellow, Black, and white, we will ship it randomly.

Features: 

• Cost-effectiveness of the injection-molding process
• Elimination of machining operations
• Low density: lightweight, low inertia
• Uniformity of parts
• Capability to absorb shock and vibration as a result of elastic compliance
• Ability to operate with minimum or no lubrication, due to inherent lubricity
• The relatively low coefficient of friction
• Corrosion-resistance; elimination of plating, or protective coatings
• The quietness of operation
• Tolerances often less critical than for metal gears, due in part to their greater resilience
• Consistency with the trend to greater use of plastic housings and other components

Package Includes:

1 x 300 RPM Dual Shaft BO Motor – Straight

The 300 RPM BO Motor Plastic Gear Motor – BO series straight motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors.

Small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & light weight makes it suitable for in-circuit placement. This motor can be used with 69mm Diameter Wheel for Plastic Gear Motors and 87mm Diameter Multipurpose Wheel for Plastic Gear Motors.

Low-cost geared DC Motor. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-12V and is perfect for building small and medium robots. Available with 60 and 150 RPM.

The motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car. They are commonly used in our 2WD platforms.

Note: These Motors are available in three different colors i.e. Yellow, Black, and white, we will ship it randomly.

Features: 

• Cost-effectiveness of the injection-molding process
• Elimination of machining operations
• Low density: lightweight, low inertia
• Uniformity of parts
• Capability to absorb shock and vibration as a result of elastic compliance
• Ability to operate with minimum or no lubrication, due to inherent lubricity
• The relatively low coefficient of friction
• Corrosion-resistance; elimination of plating, or protective coatings
• The quietness of operation
• Tolerances often less critical than for metal gears, due in part to their greater resilience
• Consistency with the trend to greater use of plastic housings and other components

Package Includes:

1 x 300 RPM BO Motor – Straight

TowerPro Servo Motors are optimum-quality and affordable cost servos.! They are suitable for a wide range of applications, including RC aircraft, automobiles, and robotics, Or just to have some fun with whatever crazy project you’re working on.

When you purchase TowerPro motors in India, they are almost usually NOT ORIGINAL, and these are no exception… These are NOT ORIGINAL Tower Pro Servos, either. However, they are dead cheap and Serve the purpose. We put them to the test and found them to be of good quality for the price.

You can buy E Max Servos OR Orange servos if you’re seeking high-quality servos.

Features: 

• High resolution
• Accurate positioning
• Fast control response
• Constant torque throughout the servo travel range
• Excellent holding power

Package Includes:

1 x TowerPro MG90S Mini Digital 180 Degree Servo

1 x Set of Horns

1. One Point
2. Two Point
3. Four Point

1 x Set of Screws

TowerPro Servo Motors are optimum-quality and affordable cost servos.! They are suitable for a wide range of applications, including RC aircraft, automobiles, and robotics, Or just to have some fun with whatever crazy project you’re working on.

When you purchase TowerPro motors in India, they are almost usually NOT ORIGINAL, and these are no exception… These are NOT ORIGINAL Tower Pro Servos, either. However, they are dead cheap and Serve the purpose. We put them to the test and found them to be of good quality for the price.

You can buy E Max Servos OR Orange servos if you’re seeking high-quality servos.

Wire Description:

• RED – Positive
• Brown – Negative
• Orange – Signal

This TowerPro SG90 Continuous Rotation 360 Degree Servo Motor is special among all the available servo motors because its operation is very different from that of a standard servo. As instead of going to a specified angle, this servo will be static at a 1.5ms pulse, a longer pulse gives forward rotation and a shorter pulse give backward rotation.

Features: 

• High resolution
• Accurate positioning
• Fast control response
• Constant torque throughout the servo travel range
• Excellent holding power

Package Includes:

1 x TowerPro SG90 Servo Motor 360° rotation with Cable

Set of Horns

1. One Point
2. Two Point
3. Four Point

1 x Set of Screws

TowerPro Servo Motors are optimum-quality and affordable cost servos.! They are suitable for a wide range of applications, including RC aircraft, automobiles, and robotics, Or just to have some fun with whatever crazy project you’re working on.

When you purchase TowerPro motors in India, they are almost usually NOT ORIGINAL, and these are no exception… These are NOT ORIGINAL Tower Pro Servos, either. However, they are dead cheap and Serve the purpose. We put them to the test and found them to be of good quality for the price.

You can buy E Max Servos OR Orange servos if you’re seeking high-quality servos.

Wire Description:

• RED – Positive
• Brown – Negative
• Orange – Signal

We have imported this copy of original TowerPro SG90 9g Mini Servo from our trusted supplier. This good quality servo motor is in very close competition to the original TowerPro SG90 1.2kgCm 180-degree servo motor.

Main Difference between Good Quality SG90 and Standard Quality Sg90 is

Features: 

• High resolution
• Accurate positioning
• Fast control response
• Constant torque throughout the servo travel range
• Excellent holding power

Package Includes:

1 x TowerPro SG90 9g Mini Servo Motor with Cable

1 x Set of Horns

1. One Point
2. Two Point
3. Four Point

1 x Set of Screws

The coin ERM type vibration motor is very popular in the wearables field. Since the coin motor is the thinnest motor in the world, and the thinnest we can do is 2.0mm, which is suitable for a thin and light smartwatch. You can click on 7-12mm flat motor for selection. These coin motors could be of different sizes and different contact modes for your choice.

Such as many kinds of connectors, spring contacts, and FPC. We can design a customized FPC for your application. If your device requires it, a sponge with different thicknesses or double adhesive tape also can be added.

Features: 

• Small Compact Size
• Metal Body
• volt: 2.5V
• Speed 9000 RPM
• Powerful Motor 

Specifications:

• Operating voltage: 2.5-3.3 VDC
• Starting Voltage: 2.3 mAx
• Starting Current: 190 Max
• Rated Current: 80.0 Max
• Rated RPM.: 9000 Min
• Rated Voltage.: 3.0 V DC

Package Includes:

5 x ERM Coin Vibration Motor

This 5V DC 28BYJ-48 Stepper Motor is a small, inexpensive, and high-quality geared step motor. The 28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver is a widely popular combination of the stepper motor and stepper driver, because of the stability and reliability of the system.

Thia 28BYJ-28 stepper motor is imported from one of our trusted suppliers and the supplier has guaranteed the quality of these compact stepper motors.

The motor has a reduction ratio of 64:1, so it offers a decent torque for its size at speeds of about 15 RPM. It is a unipolar stepper motor that has 5-wires.

As stated before the pack contains ULN2003 Stepper Motor Driver which is a Mini Stepper Motor Driver. The main purpose of ULN2003 is to amplify the control signals from the Arduino, so as to drive the 28BYJ-48 Stepper Motor.

Note: The system is recommended to run on Half-step mode(8 step control signal sequence) for excellent performance experience.

Features: 

• Brand new and high-quality product
• Stepper motor with a standard interface, when used directly pluggable
• A, B, C, D four-phase LED indicator which indicates the status of the stepper motor work
• Compact size stepper motor perfect for small robotics applications

Package Includes:

This 5V DC 28BYJ-48 Stepper Motor is a small, inexpensive, and high-quality geared step motor. The 28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver is a widely popular combination of the stepper motor and stepper driver, because of the stability and reliability of the system.

Thia 28BYJ-28 stepper motor is imported from one of our trusted suppliers and the supplier has guaranteed the quality of these compact stepper motors.

The motor has a reduction ratio of 64:1, so it offers a decent torque for its size at speeds of about 15 RPM. It is a unipolar stepper motor that has 5-wires.

As stated before the pack contains ULN2003 Stepper Motor Driver which is a Mini Stepper Motor Driver. The main purpose of ULN2003 is to amplify the control signals from the Arduino, so as to drive the 28BYJ-48 Stepper Motor.

Note:

1. The system is recommended to run on Half-step mode(8 step control signal sequence) for excellent performance experience.
2. ULN2003 Stepper Motor Driver is not included in the package you have to buy it separately

Features: 

• Brand new and high-quality product.
• Stepper motor with a standard interface, when used directly pluggable.
• A, B, C, D four-phase LED indicator which indicates the status of the stepper motor work.
• Compact size stepper motor perfect for small robotics applications.

Package Includes: