Development Board
ESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module for Arduino
ESP8266 is the name of an infamous WiFi module that is a system on a chip (SoC) developed by Espressif Systems, a company based in Shanghai. Originally used with Arduino boards to WiFi-enable hardware projects, it soon became a cheap standalone Arduino-compatible development board. It can function in complete autonomy, without an additional microcontroller like Arduino board for example.
ESP32 is a series of low-cost, low-power system on a chip microcontrollers with integrated Wi-Fi and dual-mode Bluetooth
ESP8266 is the name of an infamous WiFi module that is a system on a chip (SoC) developed by Espressif Systems, a company based in Shanghai. Originally used with Arduino boards to WiFi-enable hardware projects, it soon became a cheap standalone Arduino-compatible development board. It can function in complete autonomy, without an additional microcontroller like Arduino board for example.
The ESP32-CAM is a full-featured microcontroller that also has an integrated video camera and microSD card socket. It’s inexpensive and easy to use, and is perfect for IoT devices requiring a camera with advanced functions like image tracking and recognition.
ESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module for Arduino (ESP32 LoRa SX1278 BT WiFi Module)
Product Description :
The ESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module for Arduino, this series is the new development of the cost-effective networking program.
The main chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b / g / N HT40 Wi-Fi transceiver, baseband, protocol stack, and LWIP, integrated dual-mode Bluetooth (traditional Bluetooth and BLE low power Bluetooth).
This product is based on the WIFI Kit 32 added SX1278 chip, that is, LoRa remote modem, 433MHz frequency, about -148dBm high sensitivity, 20 dBm power output, high reliability, transmission distance (measured open area communication distance 2.6Km). Onboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display, lithium battery charging circuit and interface, CP2102 USB to serial chip, the perfect support for Arduino development environment, can be very simple and fast for program verification and product development.
Note: Package does not include the Lithium battery
Features :
- Supports Sniffer, Station, softAP and Wi-Fi Direct modes
- Data rate: 150 Mbps @ 11n HT40,72 Mbps @ 11n HT20,54 Mbps @ 11g, 11 Mbps @ 11b
- Transmit power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n
- Receiver sensitivity up to – 98 dBm
- UDP continues to throughput by 135 Mbps
- Application: Camera
Package Includes:
1 xESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module
1 x Antenna(16 cm)
2 x 1*18 Pins Burg connectors(Straight)
ESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module for Arduino
TM8S103F3P6 Core STM8 Development Board
The advantages of the Core Board STM8S103F3P6 STM8 Development Board Minimum System Board is this development board uses the Micro USB to link to the power. The Micro USB line is compatible with Smartphone cable which means we can get the data easily. We do not use the USB MINI cable to link to power because the USB MINI cable has out of style and very difficult to get.
This STM8S development board draws our attention because of its low price, humanity design and available with complete information.
You can use 2.54 pin on the board or power supply pad, the pad when using the power supply, input voltage range 4.5V-15V can output to the outside through pin 3.3V!
This development board using Micro USB cable supply, compatible with smartphone lines, data lines are simple and easy to get, but not USB MINI line-powered, USB MINI line is not easy to find, has been gradually phased out.
TM-619-30A Count Down Function Programmable Controller Digital Timer
Count Down Function Programmable Controller Digital Timer
- 30A, 1,2 as input and 3,4 as output, Replaceable Battery
- Microprocessor Controlled Quality.Used For Automatic Switching On/Off For Any Appliances For Irrigation / Agricultural pumps / Street Light / Signage Board / Hydroponics / Appliances
- Accurate To The Minute Control, Superior relay
- Voltage: 220/250 Vac Frequency:50/60 Hz Operation Temperature: 0-55 C Amps : 30A
- Package Includes One Digital Timers. Instruction Manual, Connecting Thimbles
- In anywhere need time control in civilian, home or industrial. It can be used to set 17 programs to control the on and off of electric appliances in 24 hours.
NANO32 ESP32 IoT Development Board (NANO32)
The NANO32 ESP32 IoT Development Board is the product by the designers of Arduino Nano and Espresso Lite (Thailand-based Gravitech and MakerAsia respectively) is the first third-party development board that provides another alternative to the eager-beavers community of geeks, makers, hackers and developers interested in the latest Wi-Fi/BT combo ‘wonder’ chip.
This NANO32 ESP32 IoT Development Board is the big brother of the ESP8266 development board. Nano32 is collaboration work by Makerasia and Gravitech from Thailand. It is base on ESP32 SoC. ESP32 the flagship product from Espressif (the company that design and produce ESP8266), but now with Xsensa Dual-Core 32-bit processors that case provides 600DMPIS. Let’s look at the features and Specification of this board.
The ESP32 is the latest chipset to be released by Shanghai-based, Espressif Systems that combines both Wi-Fi and Bluetooth (BT) capabilities within its dual CPU core and a rich accompaniment of hardware peripherals.
Designed as an ultra-low power chip using TSMC 40nm technology, it employs a customized CPU design based on the Cadence® Tensilica® Xtensa® Dual-Core 32-bit LX6 600 DMIPS.
Out of Stock
34.07€ Inc Tax
LoRa SX1278 433M 10KM Wireless Spread Spectrum Transmission Module Ra-02 SX1278 Socket IOT (LoRa SX1278 Wireless Spread Spectrum Transmission Module)
Product Description :
Ra-02 is based on sx1278 wireless transparent transmission module (transceiver one), socket it can connect external antenna. Using advanced LoRa spread spectrum technology, communication distance is10000 meters, super error correction, anti-interference ability, with the air wake-up function (ultra-low power consumption). It can be used in the environment with thousands of people, especially for meter reading, smart home, burglar alarm and other equipment. Lora spread spectrum modulation technology 20dbm-100mw constant rf power output when voltage changes high sensitivity: Low to -148dbm half-duplex SPI communication programmable bit rates up to 300kbps supports FSK, GFSK, MSK, GMSK, LoRa and OOK modulation modes 127db RSSI dynamic range automatic rf signal detection, cad mode and ultra-high-speed AFC with CRC, up to 256 bytes of packet engine small volume dual-row stamp-hole patch package with shielding shell spring antenna (ra-01) external antenna (ra-02).
Ra-02 is based on sx1278 wireless transparent transmission module (transceiver one), socket it can connect external antenna. Using advanced LoRa spread spectrum technology, communication distance is10000 meters, super error correction, anti-interference ability, with the air wake-up function (ultra-low power consumption). It can be used in the environment with thousands of people, especially for meter reading, smart home, burglar alarm and other equipment. Lora spread spectrum modulation technology 20dbm-100mw constant rf power output when voltage changes high sensitivity: Low to -148dbm half-duplex SPI communication programmable bit rates up to 300kbps supports FSK, GFSK, MSK, GMSK, LoRa and OOK modulation modes 127db RSSI dynamic range automatic rf signal detection, cad mode and ultra-high-speed AFC with CRC, up to 256 bytes of packet engine small volume dual-row stamp-hole patch package with shielding shell spring antenna (ra-01) external antenna (ra-02).
Arduino Uno/Nano Development Board for Learning/DIY
ESP8266 is the name of an infamous WiFi module that is a system on a chip (SoC) developed by Espressif Systems, a company based in Shanghai. Originally used with Arduino boards to WiFi-enable hardware projects, it soon became a cheap standalone Arduino-compatible development board. It can function in complete autonomy, without an additional microcontroller like Arduino board for example.
SX1278 LoRa Module 433M 433MHz 10KM Ra-02 Ai-Thinker Wireless Spread Spectrum Transmission Socket for Smart Home (SX1278 LoRa Module-Wireless Spread Spectrum Transmission Socket)
Product Description :
The SX1276/77/78/79 transceivers feature the LoRa long range modem that provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. As the SX127x chips needs a few additional components for operation, the Ra-02 module developed by A.I. Thinker includes an SX1278 and everything needed for it to work in a small form factor PCB. This breakout board facilitates developing/prototyping with the Ra-02 module tremendously. Solder the pins, plug it into a microcontroller/SoC using dupont wires or a solderless breadboard, and use it to create LoRa projects! Features: Wireless Standard: 433MHz Frequency range: 420~450MHz 20dBm@10mW. Stable RF output power when input voltage changed Half-duplex SPI communication Programmable bit rate can reach to 300kbps 127dB RSSI wave range Radio: Semtech SX1278 Antenna connector: IPX (U.FL) Operating Voltage: 1.8~3.7VDC, default 3.3V Working Current: Rx <10.8mA (Lna Boost closed, Band 1) Tx <120mA ( 20dBm); sleep mode: 0.2uA
The SX1276/77/78/79 transceivers feature the LoRa long range modem that provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. As the SX127x chips needs a few additional components for operation, the Ra-02 module developed by A.I. Thinker includes an SX1278 and everything needed for it to work in a small form factor PCB. This breakout board facilitates developing/prototyping with the Ra-02 module tremendously. Solder the pins, plug it into a microcontroller/SoC using dupont wires or a solderless breadboard, and use it to create LoRa projects! Features: Wireless Standard: 433MHz Frequency range: 420~450MHz 20dBm@10mW. Stable RF output power when input voltage changed Half-duplex SPI communication Programmable bit rate can reach to 300kbps 127dB RSSI wave range Radio: Semtech SX1278 Antenna connector: IPX (U.FL) Operating Voltage: 1.8~3.7VDC, default 3.3V Working Current: Rx <10.8mA (Lna Boost closed, Band 1) Tx <120mA ( 20dBm); sleep mode: 0.2uA
- Packet radio with ready-to-go compatible with Arduino libraries
- Maximum output power: 20dBm; max. distance: 10km; high sensitivity: –139dBm
- Breakout board for SX1278 LoRa-based module Ra-02 with SPI interface
- <100mW ultra-small size, widely used in AMR, remote industrial control filed
- Dimension: Length-28mm, Width-20mm, Height-5mm, Weight-7gm
ESP32-DevkitC-32E V4 - Latest ESP32 Development board (ESP32-DevkitC-32E V4 - Latest ESP32 Development board)
Product Description :
ESP32-DevKitC-32E is a WiFi/Bluetooth Development module board available from the Espressif. This module uses the latest ESP32-WROOM-32E module integrated with the PCB antenna. It is also having the microUSB connector for power, uart, programming related usage. ESP32 Devkit is an excellent microcontroller based development module that uses berg header for easy and hassle free breadboard integration. An internal 3.3V regulator is also available to power the entire board and could provide 1A of output via it’s pin. This board uses FTDI CH340 IC for communicating between ESP32 and the USB to UART Protocol.
ESP32-DevKitC-32E is a WiFi/Bluetooth Development module board available from the Espressif. This module uses the latest ESP32-WROOM-32E module integrated with the PCB antenna. It is also having the microUSB connector for power, uart, programming related usage. ESP32 Devkit is an excellent microcontroller based development module that uses berg header for easy and hassle free breadboard integration. An internal 3.3V regulator is also available to power the entire board and could provide 1A of output via it’s pin. This board uses FTDI CH340 IC for communicating between ESP32 and the USB to UART Protocol.
- Micro USB Port for interfacing
- 38-Berg pin header with 2.54″ pitch for easy integration with breadboard
- ESP32-WROOVER footprint available, so it can be interchanged via soldering
- Proper decoupling and Tantalum capacitor to ensure no bounce during the boot download in ESP32
- FTDI CH340 IC for faster communication as a USB to UART bridge and vice-versa
ESP32 is a series of low-cost, low-power system on a chip microcontrollers with integrated Wi-Fi and dual-mode Bluetooth
ESP8266 NodeMCU LUA CP2102 ESP-12E Internet WiFi Development Board Open Source Serial Wireless Module (ESP8266 NodeMCU WiFi Development Board)
ESP8266 is the name of an infamous WiFi module that is a system on a chip (SoC) developed by Espressif Systems, a company based in Shanghai. Originally used with Arduino boards to WiFi-enable hardware projects, it soon became a cheap standalone Arduino-compatible development board. It can function in complete autonomy, without an additional microcontroller like Arduino board for example.
ESP32-CAM WiFi Bluetooth Camera Module Development Board ESP32 with Camera Module OV2640 (ESP32-CAM WiFi Bluetooth Camera Module Development Board)
Product Information :
Product Description :
| Brand | Xiuxin |
| Connectivity Technology | Bluetooth, Wi-Fi |
| Operating System | DOS |
| CPU Manufacturer | Espressif |
| Wireless Type | Bluetooth, 802.11bgn |
Product Description :
- The ESP32CAM is a tiny module based on ESP32 chip and OV2640. You can even program the ESP32CAM through the ESP-IDF by installing the ESP32 Core
- The ESP32CAM equips the ESP32 with everything necessary to program, run and develop on the wonderchip. Additionally, the board reserved the MPU6050,BME280 and an analog MIC.
- ESP integrates WiFi, traditional bluetooth and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, main frequency adjustment range 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc.
- Fully compliant with WiFi 802.11b/g/n/e/i and bluetooth 4.2 standards, it can be used as a master mode to build an independent network controller, or as a slave to other host MCUs to add networking capabilities to existing devices.
- ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications.
Features :
- Ultra-small 802.11b/g/n Wi-Fi BT/BLE SoC module
- Low-power dual-core 32-bit CPU for application processors
- Up to 240MHz, up to 600 DMIPS
- Built-in 520 KB SRAM, external 4M PSRAM
- Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
- Support OV2640 and OV7670 cameras with built-in flash
- Support for images WiFI upload
- Support TF card
- Support multiple sleep modes
- Embedded Lwip and FreeRTOS
- Support STA/AP/STA AP working mode
- Support Smart Config/AirKiss One-click distribution network
- Support for serial local upgrade and remote firmware upgrade (FOTA)
- Support secondary development
Note :
- Please ensure that the module input power is at least 5V 2A, otherwise the image will unstable.
- ESP32 GPIO32 pin controls camera power. When the camera is working, please pull GPIO32 low.
- Since IO0 is connected to the camera XCLK, please leave IO0 floating when using it. Do not connect high and low level.
- The factory has the default firmware, no additional download is available. Please handle it carefully if you need to re-burn other firmware
Package Included :
- ESP32-CAM Module
- Camera Module OV2640 2MP
The ESP32-CAM is a full-featured microcontroller that also has an integrated video camera and microSD card socket. It’s inexpensive and easy to use, and is perfect for IoT devices requiring a camera with advanced functions like image tracking and recognition.
ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE (ESP-WROOM-32 ESP32 ESP-32S Development Board)
Product Information :
| Brand | Allianztec |
|---|---|
| Manufacturer | Allianztec |
| Item Height | 1.3 Centimeters |
| Item Width | 3.2 Centimeters |
| Product Dimensions | 4.1 x 3.2 x 1.3 cm; 25 Grams |
| Item part number | Esp-32 Wifi Bluetooth Dual Core Board |
| Processor Brand | Espressif |
| Hard Drive Interface | USB |
| Connectivity Type | Bluetooth, Wi-Fi |
| Wireless Type | Bluetooth |
| Item Weight | 25 g |
- 2.4 GHz dual-mode Wifi and Bluetooth development with 4 MB of flash.
- Powerful, small volume. Support LWIP protocol, Freertos.
- Support three modes: AP, STA, AP STA coexistence mode.
- Compatible with Arduino, Nodemcu, and MicroPython, can be programmed with for the Arduino IDE and Lua, makes your development easier.
- The 2.4 GHz Wifi and Bluetooth dual-mode chip adopts low-power 40nm technology, which has the best power consumption and RF performance, safe and reliable, and easy to expand to various applications.
- 1