Search
Search Criteria
Products meeting the search criteria
Product Details:
Adjustment | Single Capacitor Per Axis. |
Single Supply Operation | 1.8 v to 3.6 v |
Voltage | 3 V - 6 V DC |
Ultra Low Power | 40uA |
Description:
It is Breakout board for the Analog Device''s ADXL345 Tripple axis accelerometer with Voltage regulator onboard. The module is populated with MOSFET based Voltage level conversion circuitry to enable you to interface different type of microcontrollers (3V3 & 5V) . Apart from the above all necessary components like decoupling capacitors , filter capacitors ,Pull up resistors and LED are also populated on board. So out of the box you are ready to go. The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit two''s complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface. The ADXL345 is well suited to measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (4 mg/LSB) enables measurement of inclination changes less than 1.0°.
Features:
- 3-axis sensing
- full-scale range of ±3 g
- Low power : 350 μA (typical)
- 10,000 g shock survival
- Excellent temperature stability
The GY-271 is supposed to have an HMC5883L, but some boards have a QMC5883L which has the same basic capability, but is not compatible with the H. The GY-271 QMC5883L 3-axis Electronic Compass Module Magnetic Field Sensor is designed for low field magnetic sensing with a digital interface and it is perfect to give precise heading information. If you get a GY-271 board and observe an I2C address of 0x0C and read back nothing but zeros from the board, then you probably have a QMC5883L chip!
This compact sensor fits into small projects such as UAVs and robot navigation systems. The sensor converts any magnetic field to a differential voltage output on 3 axes. This voltage shift is the raw digital output value, which can then be used to calculate headings or sense magnetic fields coming from different directions.
A development board that provides a simple interface for the HMC5883L (three-axis magnetic field module).
In our Multirotor category you will find different multirotor components, to check out more multirotor controllers click on the following category,
Multirotor Controller
HMC5883L and QMC5883L module don’t have too much difference. HMC5883L is made by Honeywell. but because the production is about to be stopped, so we use a similar compass module-QMC5883L instead. QMC5883L is made by a Chinese company, they get the production authorization of HMC5883L from Honeywell, and rename it QMC5883L. So QMC5883L and HMC5883L basically are the same, they shares the same hardware design. Just their register is a bit different. We only need to change the software a bit.
Features :- 3-axis magnetic electronic compass.
- Precise heading information.
- Fits into small projects easily.
- I2C communication.
Package Includes :
- 1 x GY-271 QMC5883L 3-axis Electronic Compass Module
- 2 x 5 * 1 Male Burg Connectors
The GY-273 module is based on the Honeywell QMC5883L IC for low-field magnetic sensing with a digital interface for applications such as low cost compassing and magnetometry. The QMC5883L includes state-of-threat, high-resolution QMC118X series magneto-resistive sensors plus an ASIC containing amplification; automatic degaussing strap drivers, offset cancellation, and a 12-bit ADC that enables 1° to 2° compass heading accuracy. The I2C serial bus allows for an easy interface.
The QMC5883L utilizes Honeywell’s Anisotropic Magnetoresistive (AMR)technology that provides advantages over other magnetic sensor technologies. These anisotropic, directional sensors feature precision in-axis sensitivity and linearity.
These sensors’ solid-state construction with very low cross-axis sensitivity is designed to measure both the direction and the magnitude of Earth’s magnetic fields, from milli-gauss to 8 gausses. Honeywell’s Magnetic Sensors are among the most sensitive and reliable low-field sensors in the industry.
Note: Sometimes markings on these boards vary slightly (e.g. Some may be labeled ‘HW-127’ instead of ‘GY-273’ even though they are otherwise identical).
Applications :
- Auto and personal navigation
- UAV systems
- Robotic navigation
- Location-based services (LBS)
- 1-2 degree heading accuracy
- A range of -8 to 8 Gauss
- Communication: IIC communication protocol
Package Includes :
- 1 x GY-273 QMC5883L 3 Axis Module Magnetic Field Sensor
The ADXL335 is a small, thin, low-power, complete 3-axis accelerometer with signal conditioned voltage outputs. The ADXL335 Module 3-axis Analog Output Accelerometer measures acceleration with a minimum full-scale range of ±3 g.
It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration. This breakout board comes with an onboard voltage regulator and works at both 3.3V & 5V (3-5V).
An accelerometer is an electro-mechanical device that will measure acceleration forces. These forces may be static, like the constant force of gravity pulling at your feet, or they could be dynamic – caused by moving or vibrating the accelerometer.
Applications :
- FPV, RC, and Robots systems
- GPS navigation systems
- Impact recognition and logging
- Gaming and virtual reality input devices
- Motion-activated functions
- Intelligent power saving for handheld devices
- Vibration monitoring and compensation
- Free-fall detection
- 6D-orientation detection
- Onboard LDO Voltage regulator
- Can be interfaced with a 3V3 or 5V Microcontroller.
- All necessary Components are populated.
- Ultra-Low Power: 40uA in measurement mode, 0.1uA in standby@ 2.5V
- Tap/Double Tap Detection
- Free-Fall Detection
- Analog output
- Build-in ultra-low noise linear LDO voltage regulator
- Built-in onboard filters, which reduce noise from the motor and other high current electronics
- Power LED
- Designed for 5V logic level
Package Includes :
- 1 x ADXL335 3-axis Analog Output Accelerometer Module angular transducer
Brand | REES52 |
Part Number | ADXL335 |
Accelerometer Type | AC Response |
Number of Axes | 3 |
Sensing Axis | XYZ |
Output Type | Analog |
Excitation Voltage | 1.8 V to 3.6 V. |
Operating Temperature Range | -20 to 70 deg C |
ADXL335 is a Breakout board based on 3 axis ADXL335 IC from Analog Devices. The Accelerometer Module require no external devices and works on 5V power supply. It can be directly interfaced to ADC of a microcontroller without any external components.
This module can be used to sense motion or tilt(in case of non moving) in 3 axis.This is the latest in a long, proven line of Analog Sensors- the holy grail of accelerometers. The ADXL335 is a triple axis MEMS accelerometer with extremely low noise and power consumption - only 320uA! The sensor has a full sensing range of /-3g The burst echo to return to the sensor. By measuring the echo pulse width, the distance to target can easily be calculated.
Features of ADXL335:
3-axis sensing.Small, low profile package.4 mm × 4 mm × 1.45 mm LFCSP.Low power : 350 μA (typical).Single-supply operation: 1.8 V to 3.6 V.10,000 g shock survival.Excellent temperature stability.BW adjustment with a single capacitor per axis.RoHS/WEEE lead-free compliant.
- 1