Search
Search Criteria
Products meeting the search criteria
ESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module for Arduino
ESP32 is a series of low-cost, low-power system on a chip microcontrollers with integrated Wi-Fi and dual-mode Bluetooth
ESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module for Arduino (ESP32 LoRa SX1278 BT WiFi Module)
Product Description :
The ESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module for Arduino, this series is the new development of the cost-effective networking program.
The main chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b / g / N HT40 Wi-Fi transceiver, baseband, protocol stack, and LWIP, integrated dual-mode Bluetooth (traditional Bluetooth and BLE low power Bluetooth).
This product is based on the WIFI Kit 32 added SX1278 chip, that is, LoRa remote modem, 433MHz frequency, about -148dBm high sensitivity, 20 dBm power output, high reliability, transmission distance (measured open area communication distance 2.6Km). Onboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display, lithium battery charging circuit and interface, CP2102 USB to serial chip, the perfect support for Arduino development environment, can be very simple and fast for program verification and product development.
Note: Package does not include the Lithium battery
Features :
- Supports Sniffer, Station, softAP and Wi-Fi Direct modes
- Data rate: 150 Mbps @ 11n HT40,72 Mbps @ 11n HT20,54 Mbps @ 11g, 11 Mbps @ 11b
- Transmit power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n
- Receiver sensitivity up to – 98 dBm
- UDP continues to throughput by 135 Mbps
- Application: Camera
Package Includes:
1 xESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module
1 x Antenna(16 cm)
2 x 1*18 Pins Burg connectors(Straight)
ESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module for Arduino
NANO32 ESP32 IoT Development Board (NANO32)
The NANO32 ESP32 IoT Development Board is the product by the designers of Arduino Nano and Espresso Lite (Thailand-based Gravitech and MakerAsia respectively) is the first third-party development board that provides another alternative to the eager-beavers community of geeks, makers, hackers and developers interested in the latest Wi-Fi/BT combo ‘wonder’ chip.
This NANO32 ESP32 IoT Development Board is the big brother of the ESP8266 development board. Nano32 is collaboration work by Makerasia and Gravitech from Thailand. It is base on ESP32 SoC. ESP32 the flagship product from Espressif (the company that design and produce ESP8266), but now with Xsensa Dual-Core 32-bit processors that case provides 600DMPIS. Let’s look at the features and Specification of this board.
The ESP32 is the latest chipset to be released by Shanghai-based, Espressif Systems that combines both Wi-Fi and Bluetooth (BT) capabilities within its dual CPU core and a rich accompaniment of hardware peripherals.
Designed as an ultra-low power chip using TSMC 40nm technology, it employs a customized CPU design based on the Cadence® Tensilica® Xtensa® Dual-Core 32-bit LX6 600 DMIPS.
Out of Stock
£29.84 Inc Tax
LoRa SX1278 433M 10KM Wireless Spread Spectrum Transmission Module Ra-02 SX1278 Socket IOT (LoRa SX1278 Wireless Spread Spectrum Transmission Module)
Product Description :
Ra-02 is based on sx1278 wireless transparent transmission module (transceiver one), socket it can connect external antenna. Using advanced LoRa spread spectrum technology, communication distance is10000 meters, super error correction, anti-interference ability, with the air wake-up function (ultra-low power consumption). It can be used in the environment with thousands of people, especially for meter reading, smart home, burglar alarm and other equipment. Lora spread spectrum modulation technology 20dbm-100mw constant rf power output when voltage changes high sensitivity: Low to -148dbm half-duplex SPI communication programmable bit rates up to 300kbps supports FSK, GFSK, MSK, GMSK, LoRa and OOK modulation modes 127db RSSI dynamic range automatic rf signal detection, cad mode and ultra-high-speed AFC with CRC, up to 256 bytes of packet engine small volume dual-row stamp-hole patch package with shielding shell spring antenna (ra-01) external antenna (ra-02).
Ra-02 is based on sx1278 wireless transparent transmission module (transceiver one), socket it can connect external antenna. Using advanced LoRa spread spectrum technology, communication distance is10000 meters, super error correction, anti-interference ability, with the air wake-up function (ultra-low power consumption). It can be used in the environment with thousands of people, especially for meter reading, smart home, burglar alarm and other equipment. Lora spread spectrum modulation technology 20dbm-100mw constant rf power output when voltage changes high sensitivity: Low to -148dbm half-duplex SPI communication programmable bit rates up to 300kbps supports FSK, GFSK, MSK, GMSK, LoRa and OOK modulation modes 127db RSSI dynamic range automatic rf signal detection, cad mode and ultra-high-speed AFC with CRC, up to 256 bytes of packet engine small volume dual-row stamp-hole patch package with shielding shell spring antenna (ra-01) external antenna (ra-02).
SX1278 LoRa Module 433M 433MHz 10KM Ra-02 Ai-Thinker Wireless Spread Spectrum Transmission Socket for Smart Home (SX1278 LoRa Module-Wireless Spread Spectrum Transmission Socket)
Product Description :
The SX1276/77/78/79 transceivers feature the LoRa long range modem that provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. As the SX127x chips needs a few additional components for operation, the Ra-02 module developed by A.I. Thinker includes an SX1278 and everything needed for it to work in a small form factor PCB. This breakout board facilitates developing/prototyping with the Ra-02 module tremendously. Solder the pins, plug it into a microcontroller/SoC using dupont wires or a solderless breadboard, and use it to create LoRa projects! Features: Wireless Standard: 433MHz Frequency range: 420~450MHz 20dBm@10mW. Stable RF output power when input voltage changed Half-duplex SPI communication Programmable bit rate can reach to 300kbps 127dB RSSI wave range Radio: Semtech SX1278 Antenna connector: IPX (U.FL) Operating Voltage: 1.8~3.7VDC, default 3.3V Working Current: Rx <10.8mA (Lna Boost closed, Band 1) Tx <120mA ( 20dBm); sleep mode: 0.2uA
The SX1276/77/78/79 transceivers feature the LoRa long range modem that provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. As the SX127x chips needs a few additional components for operation, the Ra-02 module developed by A.I. Thinker includes an SX1278 and everything needed for it to work in a small form factor PCB. This breakout board facilitates developing/prototyping with the Ra-02 module tremendously. Solder the pins, plug it into a microcontroller/SoC using dupont wires or a solderless breadboard, and use it to create LoRa projects! Features: Wireless Standard: 433MHz Frequency range: 420~450MHz 20dBm@10mW. Stable RF output power when input voltage changed Half-duplex SPI communication Programmable bit rate can reach to 300kbps 127dB RSSI wave range Radio: Semtech SX1278 Antenna connector: IPX (U.FL) Operating Voltage: 1.8~3.7VDC, default 3.3V Working Current: Rx <10.8mA (Lna Boost closed, Band 1) Tx <120mA ( 20dBm); sleep mode: 0.2uA
- Packet radio with ready-to-go compatible with Arduino libraries
- Maximum output power: 20dBm; max. distance: 10km; high sensitivity: –139dBm
- Breakout board for SX1278 LoRa-based module Ra-02 with SPI interface
- <100mW ultra-small size, widely used in AMR, remote industrial control filed
- Dimension: Length-28mm, Width-20mm, Height-5mm, Weight-7gm
ESP32-DevkitC-32E V4 - Latest ESP32 Development board (ESP32-DevkitC-32E V4 - Latest ESP32 Development board)
Product Description :
ESP32-DevKitC-32E is a WiFi/Bluetooth Development module board available from the Espressif. This module uses the latest ESP32-WROOM-32E module integrated with the PCB antenna. It is also having the microUSB connector for power, uart, programming related usage. ESP32 Devkit is an excellent microcontroller based development module that uses berg header for easy and hassle free breadboard integration. An internal 3.3V regulator is also available to power the entire board and could provide 1A of output via it’s pin. This board uses FTDI CH340 IC for communicating between ESP32 and the USB to UART Protocol.
ESP32-DevKitC-32E is a WiFi/Bluetooth Development module board available from the Espressif. This module uses the latest ESP32-WROOM-32E module integrated with the PCB antenna. It is also having the microUSB connector for power, uart, programming related usage. ESP32 Devkit is an excellent microcontroller based development module that uses berg header for easy and hassle free breadboard integration. An internal 3.3V regulator is also available to power the entire board and could provide 1A of output via it’s pin. This board uses FTDI CH340 IC for communicating between ESP32 and the USB to UART Protocol.
- Micro USB Port for interfacing
- 38-Berg pin header with 2.54″ pitch for easy integration with breadboard
- ESP32-WROOVER footprint available, so it can be interchanged via soldering
- Proper decoupling and Tantalum capacitor to ensure no bounce during the boot download in ESP32
- FTDI CH340 IC for faster communication as a USB to UART bridge and vice-versa
ESP32 is a series of low-cost, low-power system on a chip microcontrollers with integrated Wi-Fi and dual-mode Bluetooth
ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE (ESP-WROOM-32 ESP32 ESP-32S Development Board)
Product Information :
| Brand | Allianztec |
|---|---|
| Manufacturer | Allianztec |
| Item Height | 1.3 Centimeters |
| Item Width | 3.2 Centimeters |
| Product Dimensions | 4.1 x 3.2 x 1.3 cm; 25 Grams |
| Item part number | Esp-32 Wifi Bluetooth Dual Core Board |
| Processor Brand | Espressif |
| Hard Drive Interface | USB |
| Connectivity Type | Bluetooth, Wi-Fi |
| Wireless Type | Bluetooth |
| Item Weight | 25 g |
- 2.4 GHz dual-mode Wifi and Bluetooth development with 4 MB of flash.
- Powerful, small volume. Support LWIP protocol, Freertos.
- Support three modes: AP, STA, AP STA coexistence mode.
- Compatible with Arduino, Nodemcu, and MicroPython, can be programmed with for the Arduino IDE and Lua, makes your development easier.
- The 2.4 GHz Wifi and Bluetooth dual-mode chip adopts low-power 40nm technology, which has the best power consumption and RF performance, safe and reliable, and easy to expand to various applications.
ATmega328P Microcontroller (ATmega328P Microcontroller)
- 32KB of of programmable FLASH
- 10,000 Write and Erase Cycles for Flash and 100,000 for EEPROM
- Operating voltage:1.8 - 5.5V
- Operating temperature range:40°C to 85°C
- Product Includes:- 1x ATmega328P Microcontroller
- 1