Addressable LED and Drivers
[2 in 1 design] Mini led flashlight with XPE COB side light two lighting methods to meet a variety of environmental needs,With Hanging Rope designed, you can hang it anywhere. 1 Pc of USB LED Light. [USB Rechargeable] The built-in rechargeable 18650 Li-ion battery allows you to continuously use this led tacticol flashlight up to 5 hours after fully charged.. [Waterproof]The led mini flashlight with full waterproof design, O-type sealed waterproof ring, so that the product better waterproof, normal use in heavy rain. [Widely Used]The led cob flashlight is processed three levels of militory hardening treatment, wear resistance, corrosion resistance, non-slip in place. Suitable for hunting, biking, hiking, camping, outdoor activities, etc.. [3 Gear Lighting Modes] XPE strong light, XPE flash light, strong COB light, just press the switch button to switch to any mode to meet different needs.
Package Includes:
Product Description
Note : Product image may vary according to the brand
Package Includes:
Product Description
Bluetooth Light Bulb Speaker
About LED Music Bulb
This Music Bulb Is the best Bluetooth speaker bulb and thus our top choice. This bulb is energy efficient and wireless and you can connect your phone or tablet to it to play music.
Why it’s the best?
This speaker light bulb has a new feature called the dancing light which makes the colorful light dance according to the music rhythm played on the speaker.
Why do we like it?
This product does the job of two items at a time. It has 13 color-changing lights and 4 light modes It provides you with a remote control that can control the lights and the music volume. A single remote can control multiple bulbs at a time.
How to activate a Bluetooth light bulb
- Applied this bulb to the E27 base, and then power the bulb
- The bulb is lit up, then you can use the remote control to adjust the light color
- Turn on your Bluetooth device (you phone etc), search and connect to the bulb
- Connected successfully, now you can play the music you link to the bulb
- Features: Safety Energy-saving, environmental protection, low power, low heat generating
Updated IR controller
The updated remote control makes light bulbs(Light mode)12 color changing lights and 1 white daylight. It has 3 modes which are flash, strobe and fade.
(Music mode) pause/play & adjust volume & next/previous song rely on your willing by remote controller. The effective controlling distance of the Bluetooth speaker lamp is up to 33ft/10m
High-Quality Durable
- Lifespan:55000 hours
- Temperature: 6000K
- Voltage:100-240V/50-60Hz
- Light color: RGBW
- Power:12W/(LED 7W RGB 7W)
Smart Speaker
- A built-in 3W speaker of double magnetic,
- pure and crystal sound.
- The advanced acoustic technology
- delivers a clear sound.
Package Includes:
- Ideal for decoration of building outlines, landscape illumination, amusement themes,
- Holiday light sculpture, decorative figure, active signs, displays, shop windows
- And storefronts, bar, nightclub, street, sidewalk, deck, park, porch, staircase, railing, ceiling, or driveway.
Note: LEDs Driver or Adapter is not included in the package, you have to buy it separately
Features :
- Bright 5050 SMD LED, high intensity and reliability.
- Long life span 50,000 hours
- Soldered by pieces, packed with 5 meters.
- Flexible ribbon for curving around bends
- Completely smooth and even light spread, solving the uneven luminous problem
- Ultra-bright but running at low temperature
- Low power consumption
12V RGB 5050 SMD LED Strip with 5Meter length has 300 Bright, RGB LEDs on the single strip! The strip is comprised of 5050 Sized SMD RGB LEDs and draws a total of 22.5 Watts of Power. This RGB 5050 SMD LED Strip strip is flexible and can be bent to conform to curves and corners. Runs from 12VDC. (Power supply and controller not included) You need a minimum output 2 AMPs Adapter to power this full 5 Meter strip. Using an underpowered power supply on these strips will result in power loss down the line and mismatched colors due to a certain color of diodes not receiving enough power.
These strips are a bit different because, though they have the same number of LED modules (300) in another Cold white or Warm White roll, they actually have three times the light-emitting diodes as a regular LED strips. This is because each of the 300 modules on the strip each contains three colors. A red, a blue, and green LED. This means that, when set to white, at full brightness, the RGB strips use almost three times the power as the regular white strips. A 5 Meter roll of RGB LEDs uses roughly 2.8 Amps at 12VDC. So connecting three of these strips, end-to-end would result in roughly an 8.4 Amp requirement.
We also carry 44 Keys RGB IR Remote Controller for 12V 5050 RGB LED Strip
Note: These are NOT individually addressable LED strips. Each color has its own separate 12VDC circuit. For a total of three 12VDC circuits (R G B). You can power these strips off of regular 12V DC if you don’t need advanced flashing patterns or color mixing.
Features :
- With the controller can make various colours and change Blinking patterns
- Such as horse race, raindrop, color scan, trail and jump etc
- Flexible can be bent to any shape
- LED quantity and length can be made customizable
- High brightness and long life (over 40,000hrs)
- Low voltage, safe for use
This controller box operates on 12Volt DC supply via onboard 5mm female DC port. At the other end, it has 4 Pin Output female connector which can be connected to RGB strip directly. Also, the controller box has an IR receiver with a flexible probe to set it according to the requirement or to hide the controller in systematic decorations.
The controller box can operate at up to 6A current which means you can run 5 meters RGB Strip easily on this controller. IR remote control comes with 42 key with various keys for the differential pattern of RGB functions, Brightness Adjustments, Blink frequency Adjustment well as ON and OFF button
Button use:
R: Color change to Red
G: Color change to Green
B: Color change to Blue
W: Color change to White
Use: 12V 5050 RGB SMD LED strip lights
Note: Length of Strip depends upon the adapter you use to power the box. For 1-meter strip, 12V 2A power supply is needed
Features :
- Plug and Play Easy to connect
- Flexible IR Receiver Probe
- Multi-Function IR Remote control
- 16 colors, 5 light pattern: Static/Flash/Strobe/Fade-change/RGB Smooth-change.
- 16-classes Static Mode Dim Control
- 16-Speeds Control in Flash / Strobe / Fade-change / RGB Smooth-change.
- Connecting mode: common anode
- Material: plastic
- Output: Three CMOS Drain-open Output
- 1