Motors | Drivers | Pumps | Actuators

The coin ERM type vibration motor is very popular in the wearables field. Since the coin motor is the thinnest motor in the world, and the thinnest we can do is 2.0mm, which is suitable for a thin and light smartwatch. You can click on 7-12mm flat motor for selection. These coin motors could be of different sizes and different contact modes for your choice.

Such as many kinds of connectors, spring contacts, and FPC. We can design a customized FPC for your application. If your device requires it, a sponge with different thicknesses or double adhesive tape also can be added.

Features: 

• Small Compact Size
• Metal Body
• volt: 2.5V
• Speed 9000 RPM
• Powerful Motor 

Specifications:

• Operating voltage: 2.5-3.3 VDC
• Starting Voltage: 2.3 mAx
• Starting Current: 190 Max
• Rated Current: 80.0 Max
• Rated RPM.: 9000 Min
• Rated Voltage.: 3.0 V DC

Package Includes:

5 x ERM Coin Vibration Motor

This 5V DC 28BYJ-48 Stepper Motor is a small, inexpensive, and high-quality geared step motor. The 28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver is a widely popular combination of the stepper motor and stepper driver, because of the stability and reliability of the system.

Thia 28BYJ-28 stepper motor is imported from one of our trusted suppliers and the supplier has guaranteed the quality of these compact stepper motors.

The motor has a reduction ratio of 64:1, so it offers a decent torque for its size at speeds of about 15 RPM. It is a unipolar stepper motor that has 5-wires.

As stated before the pack contains ULN2003 Stepper Motor Driver which is a Mini Stepper Motor Driver. The main purpose of ULN2003 is to amplify the control signals from the Arduino, so as to drive the 28BYJ-48 Stepper Motor.

Note: The system is recommended to run on Half-step mode(8 step control signal sequence) for excellent performance experience.

Features: 

• Brand new and high-quality product
• Stepper motor with a standard interface, when used directly pluggable
• A, B, C, D four-phase LED indicator which indicates the status of the stepper motor work
• Compact size stepper motor perfect for small robotics applications

Package Includes:

This 5V DC 28BYJ-48 Stepper Motor is a small, inexpensive, and high-quality geared step motor. The 28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver is a widely popular combination of the stepper motor and stepper driver, because of the stability and reliability of the system.

Thia 28BYJ-28 stepper motor is imported from one of our trusted suppliers and the supplier has guaranteed the quality of these compact stepper motors.

The motor has a reduction ratio of 64:1, so it offers a decent torque for its size at speeds of about 15 RPM. It is a unipolar stepper motor that has 5-wires.

As stated before the pack contains ULN2003 Stepper Motor Driver which is a Mini Stepper Motor Driver. The main purpose of ULN2003 is to amplify the control signals from the Arduino, so as to drive the 28BYJ-48 Stepper Motor.

Note:

1. The system is recommended to run on Half-step mode(8 step control signal sequence) for excellent performance experience.
2. ULN2003 Stepper Motor Driver is not included in the package you have to buy it separately

Features: 

• Brand new and high-quality product.
• Stepper motor with a standard interface, when used directly pluggable.
• A, B, C, D four-phase LED indicator which indicates the status of the stepper motor work.
• Compact size stepper motor perfect for small robotics applications.

Package Includes:

24V DC Solenoid Water Air Valve Switch (Normally Closed) – 1/2″ controls the flow of fluid (liquid or air) and acts as a valve between high-pressure fluid! This liquid valve would make a great addition to your robotic gardening project. There are two ½” (Nominal NPT) outlets. Normally, the valve is closed. When a 24V DC supply is applied to the two terminals, the valve opens and water can push through.

The valve works with the solenoid coil which operates electronically with DC 24 volt supply. As it is a normally closed assembly, it opens the flow of fluids as soon as it is powered ON and stops/blocks the flow when the supply voltage removed.

Note:  While Connecting the Valve in the Flow pipeline, you need to mind the Input and Output direction of the valve. It will work only if you connect it in the right direction. (Hint: Inside the value, at one side you will find the filter this is the input side of the value)

Features: 

• Compact and convenient
• Easily installed and serviced
• Precise and reliable
• The installation direction can be arbitrary Angle
• Pressure-regulating valve (steady flow valve) function similar to the water flow switch
• Not only can it provide a steady flow, but it also prevents dry burning
• Suitable for fluids like water, oil, air

Package Includes: