Robots & Drone Parts
Drones
Choosing your first quadcopter and going through all its parts can be overwhelming. Don’t worry about we have a wide range of drone parts like GPS, Cameras, Frames, Flight controller, Transceiver and many more small tools. To get all these high-quality Quadcopter Components at affordable Price in India, visit our product categories below.
All Quadcopter parts and components are vital to a smooth and safe flight. If you know the parts of a quadcopter; it will give you extra confidence while flying. If you have any RC flight problems, then we will assist you greatly in getting to any flying issues.
The major application areas of FPV drone are Racing Drone for hobbyist, Video shooting or recording for professionals, Border surveillance for defence purpose and many more.
4WD Suspension Smart Car Chassis with 125 RPM BO Motors Kit is best for beginners as well as regular users. This is very creative designed look like any NASA project bot. The Kit is easy to use as it has all the mounting hole and assembly. This smart car chassis come with battery holder for providing power to bo motor. It has an exact same size mounting hole for Arduino and Raspberry Pi and Motor drivers.
Additionally this Kit comes with all essentials accessories like Spacers, Nut & Bolt set, Wires for connecting motors, 4 x AA battery holder to provides 6v DC power to bot. and the 2 in 1 screwdriver.
Features:
- Very Easy to Assemble
- High Quality Laser Cutted Acrylic Plates
- Precised Nut-bolts and Spacers
- High Quality Wheels and 125RPM BO Motors with Dual Straight Shaft
Package Includes:
4 x 125RPM BO Motors with Dual Straight Shaft
4 x 65 x 25 mm Diameter Plastic Wheel with Rubber Grip (Yellow)
4 x 220 mm Long Fins for motor holding
2 x 160 x 160mm 3mm thick Acrylic Base plates (Black)
1 x 4*AA battery holder
1 x Wires, Spacers, and nut-bolt set
Get this DIY Intelligent Line follower/Tracking Smart Car Kit with all essential parts to build and Learn your own DIY line follower robot car This car just needs a 3V power supply to operate from two AA batteries. The comes with two powerful geared BO motors and all the required parts and ICs to run the robot, you do not need to use any driving board or coding to program it. you just need little soldering knowledge to assemble this bot.
Note: Product Images May vary in terms of the colour of the battery box, wheel or PCB
Package Includes:
1 x DIY Intelligent Line follower/Tracking Smart Car Kit
The Cligo Smart Robot Car Kit is a great way to get started with four motor robotics and sensor integration using the Arduino programming language. The kit includes everything you need. This Arduino robot kit will teach you how to drive your Arduino robot car, how to have it follow lines, how to control it remotely, and more. This kit doesn’t require previous programming or electronics experience but it is recommended that you possess an understanding of or desire to learn about robotics.
Also, this Arduino robot acts as a gateway to design and implement various robotics projects using Arduino.
Easy to Assemble:
The Cligo 4WD Chassis is a durable and modular robot platform from EasyMech. The chassis plates and mounts are cut from ABS plastic and utilize sensors, controllers, power, etc. Simply snap each panel together and you’ll be able to attach your motors, sensors and robotics controller.
Attention – Cligo does not require any additional tools for its assembly. The Cligo kit comes with a screwdriver, which you will need to mount servo motor. Do not attempt to remove chassis parts by squeezing them with pliers. You will break the small nubs.
Package Includes:
1 X Cligo 4WD ABS chassis
4 X 100 RPM BO Motor-Straight
4 X 65mm Robot Wheel Grade B for BO Motors (Yellow)
1 X SmartElex RLS-06 Analog & Digital Line Sensor Array
1 X Tower Pro SG90 1.2kgCm 180 Degree Rotation Servo Motor
1 X SmartElex L298N Motor Driver with On-board Arduino Uno.
2 X Orange ICR 18650 2500mAh Lithium-Ion Battery
1 X 18650 x 2 battery holder with cover and On/Off Switch With DC jack
1 X HC-SR04-Ultrasonic Range Finder
1 X EasyMech Snap-fit ABS Bracket for HC-SR04 Ultrasonic Sensor
1 X Tomo V6-2 Dual USB 2 Slots Battery Intelligent Charger for AA / AAA / 18650 Batteries Black
1 X 20cm DuPont Wire Color Jumper Cable, 2.54mm 1P-1P Male to Female 40PCS
1 X 20cm DuPont Wire Color Jumper Cable, 2.54mm 1P-1P Female to Female 40PCS
1 X Infrared IR Wireless Remote Control Module Kit for Arduino
1 X 2 in 1 Philips Screw Driver for DIY Robot Car
1 X 50 cm Micro USB Cable
1 X 8mm Spiral Wrapping Band Black for Wires (cm)
1 X 3M Multipurpose Double Sided Sponge Glue Adhesive Dash pad 1 pcs
1 X Manual
This Transparent Robot Smart Car Chassis comes with a quality product. The kit is easy to assemble/disassemble.
Note:
The motor power supply is 3V ~ 6V. Rotating speed of the motor is 125RPM. All the parameter above is tested without load. The car Chassis is transparent, you need to tear out a protective paper. The color of a protective paper may be different.
Feature:
- Smart car chassis tracing car Robot car chassis with code disk, Ideal for DIY
- This car is the tachometer encoder
- With a 4 AA battery box (batteries not included)
- It can be used for distance measurement, velocity
- Can use with other devices to realize the function of tracing, obstacle avoidance, distance testing, speed testing
- Wireless remote control
Package Includes:
- 1 x Car chassis
- 2 x BO Gear motor
- 2 x Car tire
- 1 x Universal wheel
- 2 x Speed encoder
- 1 x Battery box(batteries not included)
- All necessary screw and nut
Get this DIY Intelligent Line follower/Tracking Smart Car Kit with all essential parts to build and Learn your own DIY line follower robot car This car just needs a 3V power supply to operate from two AA batteries. The comes with two powerful geared BO motors and all the required parts and ICs to run the robot, you do not need to use any driving board or coding to program it. you just need little soldering knowledge to assemble this bot.
Package Includes:
1 x DIY D2-1 Intelligent Line Follower/Tracing Car Kit
It is a DIY Acrylic Robot Manipulator Mechanical Arm (not-including Servo and Board). The arm has 4 DOF. The mechanical parts are laser cut to precision and are versatile to use.
Note:
The robotic manipulator mechanical arm is not assembled with all the necessary parts present in the kit. Also, the kit does not include servo motors, controller boards, and other accessories.
Package Includes:
1 x DIY Acrylic Robot Manipulator Mechanical Arm Kit
1 x Screw Set
Features:
- Made by advanced engineering material, super strong & smooth
- Easy to assemble and disassemble.
- The frame is tough and durable.
- The main glass fiber frame has good strength.
- The arm equips support ridges for better and faster forward flight.
- Features pre-threaded brass sleeves.
- Large mounting tabs for camera mounting.
- PCB for easy and neat wiring
- Easy assembly
Features :
- Made by advanced engineering material, super strong & smooth
- Easy to assemble and disassemble.
- The frame is tough and durable.
- The main glass fiber frame has good strength.
- The arm equips support ridges for better and faster forward flight.
- Features pre-threaded brass sleeves.
- Large mounting tabs for camera mounting.
- In-built power distribution board.
Package Includes:
1 x S500 Carbon Fiber Quadcopter Drone Frame Kit
This is a combo kit for the QAV250 quadcopter fame and essential electronics. This kit comes with all the components like motors, PDB, Flight Controller, ESC, Frame, etc.
Package Includes:
1 x QAV250 Full carbon frame kit
4 x MT2204Ⅱ 2300KV Brushless motor(2pcs CW 2pcs CCW)
4 x Emax Simonk12A Speed Controller
1 x F4 V3S Plus Flight Control
1 x Power Distribution board
PIXHAWK PX4 2.4.8 Flight Controller W/ SHOCK ABSORBER UBLOX NEO-M8N GPS GPS FOLDING ANTENNA BASE SET Pixhawk Power Module 433MHZ Telemetry PPM Encoder combo Kit gives you all necessary Control component for a quadcopter, in one kit with affordable price and good quality.
PIXHAWK PX4 2.4.7 Flight Controller with SHOCK ABSORBER UBLOX NEO-M8N GPS Pixhawk Power Module PPM Encoder Combo Kit gives you all necessary Control component for a quadcopter, in one kit with affordable price and good quality.
Features :
- Lightweight and Durable.
- Made by super strong and advanced engineering material.
- The frame has excellent strength.
- The arm equips dampers for the safe landing.
- The arm has multiple motor mounting holes.
Package Includes :
Features:
SE1407 Motor
- New design with imported NMB bearing
- N52 magnet and 0.2mm lamination
- Powerful with 450g thrust to work with 4″ Prop
- Special design for the FPV racer champions
BL20A BLHeli firmware ESC
- Designed specifically for multi-rotors
- Tiny form factor and low weight
- Preloaded with BLHeli, OneShot125 & Dampened Light (active braking) supported
- Fast throttle response – high 500Hz maximum refresh rate compatible with all flight controllers
- Twisted signal cable reducing the crosstalk during signal transfer
- Feature all new ultra-low resistance MOSFETs for superior current handling
- Thick PCB for better heat dissipation
- High-performance capacitor filter
Tri-Blade Propellers
- Very strong, lightweight, and fast response
- Quick to release, quick to attach
- Good efficiency and Ultra-durable
- Compatible with SE1407 CW CCW motors
- Durable plastic construction provides both lightness and rigidity.
- New design propellers, with greater aerodynamic efficiency, good lifting capacity.
Specifications:
SE1407 Motor
- KV: 3600
- Configuration: NP
- Stator Diameter: 14.0mm
- Stator Length: 7.0mm
- Shaft Diameter: 3.0mm
- Motor Dimensions (Dia.*Len): Φ18.3×16.0mm
- Weight (g): 14g
- of Cells(Lipo): 3-4S
- Max Continuous Current (A): 17.3A
- Max Continuous Power (W): 256.0W
- Internal resistance: 0.16Ω
BLHeli 20A Opto ESC
- BEC: OPTO
- Input voltage: 2-4s Lipo
- Signal Frequency: 20-500Hz
- Output PWM Frequency: 18KHz
- Come with BLHeli: Yes
- Application: Compatible with SimonK and BLHeli
- Dimensions (LxWxH): 23x12x4.5mm
- Weight: 12g (with wire)
4 x 4 x 3R Propellers
- Hi-Performance Prop FPV 3 blade bullnose propeller 4040 CW/CCW
- Material: PC
- Size: 4 x 4 x 3R
- Hub inner diameter(ID): M5
- Hub thickness: 7mm
- Weight: 3g/pcs
- Color: Green and Red
Package Includes :
4 x SE1407 3600KV CW CCWKV Brushless Motor
4 x Set of Motor Accessories
4 x BL20A BLheli firmware ESC
6 x Propellers(3CW, 3CCW).
Features:
SE1407 Motor
- New design with imported NMB bearing
- N52 magnet and 0.2mm lamination
- Powerful with 450g thrust to work with 4″ Prop
- Special design for the FPV racer champions
BL20A BLHeli firmware ESC
- Designed specifically for multi-rotors
- Tiny form factor and low weight
- Preloaded with BLHeli, OneShot125 & Dampened Light (active braking) supported
- Fast throttle response – high 500Hz maximum refresh rate compatible with all flight controllers
- Twisted signal cable reducing the crosstalk during signal transfer
- Feature all new ultra-low resistance MOSFETs for superior current handling
- Thick PCB for better heat dissipation
- High-performance capacitor filter
Tri-Blade Propellers
- Very strong, lightweight, and fast response
- Quick to release, quick to attach
- Good efficiency and Ultra-durable
- Compatible with SE1407 CW CCW motors
- Durable plastic construction provides both lightness and rigidity.
- New design propellers, with greater aerodynamic efficiency, good lifting capacity.
Specifications:
SE1407 Motor
- KV: 3600
- Configuration: NP
- Stator Diameter: 14.0mm
- Stator Length: 7.0mm
- Shaft Diameter: 3.0mm
- Motor Dimensions (Dia.*Len): Φ18.3×16.0mm
- Weight (g): 14g
- of Cells(Lipo): 3-4S
- Max Continuous Current (A): 17.3A
- Max Continuous Power (W): 256.0W
- Internal resistance: 0.16Ω
BLHeli 20A Opto ESC
- BEC: OPTO
- Input voltage: 2-4s Lipo
- Signal Frequency: 20-500Hz
- Output PWM Frequency: 18KHz
- Come with BLHeli: Yes
- Application: Compatible with SimonK and BLHeli
- Dimensions (LxWxH): 23x12x4.5mm
- Weight: 12g (with wire)
4 x 4 x 3R Propellers
- Hi-Performance Prop FPV 3 blade bullnose propeller 4040 CW/CCW
- Material: PC
- Size: 4 x 4 x 3R
- Hub inner diameter(ID): M5
- Hub thickness: 7mm
- Weight: 3g/pcs
- Color: Green and Red
Package Includes :
4 x SE1407 3600KV CW CCWKV Brushless Motor
4 x Set of Motor Accessories
4 x BL20A BLheli firmware ESC
6 x Propellers(3CW, 3CCW).
Package Includes :
1 x Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB
2 x EMAX MT2213 935KV BLDC Motor CCW With Prop1045 Combo (Original)
2 x EMAX MT2213 935KV BLDC Motor CW With Prop1045 Combo (Original)
4 x Emax BLHeli Series 30A ESC with Oneshot (Original)
1 x Pixhawk PX4 Autopilot PIX 2.4.8 32 Bit Flight Controller
1 x Ublox NEO-M8N High Precision GPS Built-in Compass for APM, AMP2.6, APM 2.8 and Pixhawk 2.4.6, Pixhawk 2.4.8
1 x UNIVERSAL GPS FOLDING ANTENNA BASE SET/BLACK
1 x Flysky FS-i6X 2.4GHz 10CH AFHDS 2A RC Transmitter With FS-iA10B 2.4GHz 10CH Receiver
1 x Orange 5200mAh 3S 40C/80C Lithium polymer battery Pack (LiPo)
1 x Lipo Voltage Checker 1-8S
1 x XT60 Male w/ 12AWG Silicon Wire 10cm (1pcs/bag)
4 x SafeConnect Flat 15CM 22AWG Servo Lead Extension (Futaba) Cable
APM 2.8 Flight Controller 2.5 2.6 Upgraded Built-in Compass for FPV RC Drone Aircraft is the new APM 2.8 flight controller. The sensors are exactly the same as the APM 2.6 flight controller, however, this has the option to use the built-in compass, or external compass via a jumper. This makes the APM 2.8 ideal for use with multi-copters and rovers.
The universal vibration damping mount or shock absorber has a list of useful applications. This is free camera mounting to Flight controller isolation. It absorbs vibration, the center supported plate is ideal for sensitive electronics and cameras. The flush flat-bottom mounting allows bolt or tape style attachment.
A new generation Ublox GPS NEO-M8N, with low power consumption and high precision, the ultimate accuracy is 0.6 meters, actually almost 0.9 meters, greater than the previous generation NEO-7N 1.4-1.6 meters accuracy; support GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 protocol, and mode or more.
The GPS Folding Antenna Base mount comes will a laser cut adhesive pad to quickly attached your GPS module, while the mount itself can be fixed to your craft using the base plate M3 hole, or the cross slides.
The APM 2.5 Power Module is a simple way of providing your APM 2.5; with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable.
Package Includes :
1 x APM 2.8 Flight Controller.
2 x Connecting Wires.
1 x Glass Fiber Flight Controller Anti-vibration/Shock absorber Set.
1 x NEO-M8N GPS Module with translucent Shell.
1x GPS Folding Base Antenna set.
1 x APM 2.5.2/2.6/2.8 Pixhawk Power Module V1.0.
Specifications and Features :
APM 2.8 Flight Controller :
- Needle: straight.
- Power supply: LP2985-3.3.
- Max voltage: 16V.
- Add a 47uF tantalum capacitor.
- Port: MUX (UART0, UART2, mnnI2, and OSD are optional, OSD is the defaulted output).
- Arduino Compatible!
- Includes 3-axis gyro, accelerometer, along with a high-performance barometer
- Onboard 4 MegaByte Dataflash chip for automatic data logging.
- Optional off-board GPS, a uBlox LEA-6H module with Compass.
- One of the first open source autopilot systems to use Invensense’s 6 DoF Accelerometer/Gyro MPU-6000.
- Barometric pressure sensor upgraded to MS5611-01BA03, from Measurement Specialties.
- Atmel’s ATMEGA2560 and ATMEGA32U-2 chips for processing and USB functions respectively.
Glass Fiber Flight Controller Anti-vibration/Shock absorber Set :
Features:
- Color: Black
- Material: Glass fiber
- Suit for different open source flight controller, like APM 2.5/2.6/2.8, KK, MWC, and Pixhawk 2.4
- Package Weight: 24 gm.
- Upper Frame size: 90 x 60 x 2 mm(LxWxH).
- Lower Frame Size: 100 x 70 x 2 mm(LxWxH).
- Shock absorber Height: 10 x 12 mm.(DxH).
NEO-M8N GPS Module :
- Receiver type 72-channel u-blox M8 engine.
- GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1.
- SBAS L1 C/A: WAAS, EGNOS, MSAS.
- Galileo-ready E1B/C (NEO-M8N).
- Nav. update rate1 Single GNSS: up to 18 HZ.
- Concurrent GNSS: up to 10 Hz.
- Position accuracy2 2.0 m CEP.
- Acquisition2 Cold start: 26 s.
- Aided starts: 2 s.
- Reacquisition: 1.5 s.
- Sensitivity2 Tracking & Nav: –167 dBm.
- Cold start: –148 dBm.
- Hot starts: –156 dBm.
- Assistance AssistNow GNSS Online.
- Assist Now GNSS Offline (up to 35 days)3.
- Assist Now Autonomous (up to 6 days).
- OMA SUPL & 3GPP compliant
- Oscillator TCXO (NEO-M8N/Q).
- Crystal (NEO-M8M).
- RTC crystal Built-In.
- Noise figure On-chip LNA (NEO-M8M). Extra LNA for.
- lowest noise figure (NEO-M8N/Q).
- Anti-jamming Active CW detection and removal.
- Extra onboard SAW bandpass filter (NEO-M8N/Q).
- Memory ROM (NEO-M8M/Q) or Flash (NEO-M8N).
- Supported antennas Active and passive.
- Odometer Travelled distance.
- Data-logger For position, velocity, and time (NEO-M8N).
GPS Folding Base Antenna set :
- Material: CNC Aluminum alloy, carbon glass fiber rod
- Mounting rod diameter: 4mm
- length of rod: 14 cm.
- GPS plate diameter: 40 mm.
- Base plate diameter: 35 mm
- Mounting hole spacing: 16-35mm
- Weight: 20g
- Colour: Anodised black
- Note: Adhesive Pad is not included.
APM 2.5.2/2.6/2.8 Pixhawk Power Module V1.0 :
- Max input voltage: 28V
- Max current sensing: 90A
- Voltage and current measurement configured for 5V ADC
- Switching regulator outputs 5.3V and 3A max
- 6-pos DF13 cable plugs directly to APM 2.5’s ‘PM’ connector
- Support 6S battery
If you want to build your first drone model on your own, then this kit is for you. The kit includes everything you’ll need to create the best drone model possible as a beginner.
For someone new to the multirotor hobby, putting together your first quadcopter parts list and bringing them home can be extremely daunting. Trying to figure out what to buy and what parts will work together is tough, especially for people who don’t come from a background in radio-controlled planes or helicopters. For the people who want to build a quadcopter but don’t know where to start. It can be frustrating trying to sort things and figure out what to do.
X2 ELF 88MM Micro Brushless Racing Kit
This X2 ELF is a mini-Size Quadcopter Frame. This Frame is built Specially to tackle the Problems in Racing and Video recording with Quadcopter. This Frame is built with 3K carbon fiber and It has Good Electrical Properties and Good Tensile Strength.
This X2 ELF 88 mm Racing Drone Frame is made from 3K carbon fiber which makes it tough and durable. Carbon fiber is the most accepted material for frame designing because of its high stiffness to weight ratio. The Carbon Fiber Frames are very rigid and improve stability and flight performance. The frame is lightweight and possesses thick arms so it can give them good mechanical strength. The mini design gives the frame Aerodynamic efficiency.
This product has a wheelbase is about 88mm and weighs around 8 gm. It is featuring a large space in the mainframe for mounting the camera and other accessories.
Note: The cover on the frame comes in different colors, we will ship it according to availability.
Features:
- 270 size FPV racing quad frame
- Super tough and durable all 4k weave carbon fiber construction
- Eye-catching Lexan body shell design available in several colors
- Unique rotating frame design allows easy access to electronics
- Plenty of space for electronics and FPV equipment
- Individual component mounting options for a neat and tidy install
- Pre-angled FPV camera mount for high-speed flight
Package Includes:
1 x Robocat 270 Racing Quadcopter Frame
Build your small indoor DIY done with this QX95 Quad-copter Combo Kit. This is QX95 Brushed Quad-copter Combo Kit will help you become a quadcopter pilot. Simply get out the soldering iron, put on your safety goggles, and began soldering. This kit has very good products and is available at an affordable cost.
For someone new to the multirotor hobby, putting together your first quadcopter parts list and bringing them home can be extremely daunting. Trying to figure out what to buy and what parts will work together is tough, especially for people who don’t come from a background in radio-controlled planes or helicopters. For the people who want to build a quadcopter but don’t know where to start. It can be frustrating trying to sort things and figure out what to do.
We’ve heard from a lot of people who are in similar positions and this bunch of products is designed to spell out exactly what you need for your quadcopter build. While we will recommend a complete list of specific parts that we have tested for a complete quadcopter build, the main purpose of providing a Brushed Quad-copter Combo Kit needed to build a quadcopter. Here’s what the kit contains
QX95 Brushed Quad-copter Frame
Every quadcopter or other multirotor aircraft needs a frame to house all the other components. Things to consider here are weight, size, and materials. This QX95 Brushed Quad-copter Frame is a well thought out brushed quad frame built from quality materials.
55mm (2.2inch) Blade Propeller Propeller for 6x15mm, 7x20mm 8.5x20mm Coreless Motor DIY Micro Quadcopter
These are 55mm (2.2inch) Blade Propeller Propeller for 6x15mm, 7x20mm 8.5x20mm Coreless Motor DIY Micro Quadcopter. The propellers with a 0.95mm mounting hole can be firmly mounted onto 1mm 4-axial motors.
8520 Magnetic Micro Coreless Motor for Micro Quadcopters – 2xCW & 2xCCW
If you are new in the multirotor/drone hobby area and want to try out some basic multirotor designs so as to enhance your basic knowledge about multirotor!!! Don’t wait and get this combo of 8520 Magnetic Micro Coreless Motor for Micro Quadcopters – 2xCW & 2xCCW.