Search
Search Criteria
Products meeting the search criteria
This replacement kit comes with one UV chamber, 1 UV light, 2 elbows, 1 white tape from the house of SAY. It reduces exposure to viruses, bacteria, and intestinal parasites that often lead to health problems such as diarrhea, cramping, and more. Simply passing drinking water through a UV water filtration system can kill the sources of these illnesses, keeping your family safe from disease. This water filter is constructed out of premium quality polycarbonate for a long lasting use. Ultra Violet paralysis germs and gives you clean drinkable water. Easy to install by yourself series with your RO/UV water filter.
Note : Product may vary according to the brand.
Package Includes:
Selfie stick, come with high quality, high sensitive remote controller, and is designed with easy telescoping, allowing you to hold in hand with a comfortable grip.
Conveniently carry around for traveling. You just unfold the selfie stick, clip your cellphone, press the button, make your photo so easily.
It's an ideal selfie stick tripod for your family gatherings, graduation, nights out, a hiking trip, holidays, and so on- the list is endless.
3 in 1 Selfie Stick Tripod with Wireless Bluetooth Remote
Connection Ways:
- Open the Bluetooth of your phone and selfie stick tripod
- Search the Bluetooth name" Selfie Com" and then pair it.
- Connect the Bluetooth to capture a shot.
Fit with Most Smartphones
You can adjust the flexible phone holder, to find your perfect shooting angle. Fordable & portable design makes a selfie stick easy to put in your pocket to carry. Capture shots from various angles, the third hands of you for distance photo taking!
Support Horizontal & Vertical
It comes with a 360°degree flexible and adjustable head, which always allows you to find the best angle for your shots.
7.3 in Folded Size & up to 28 in Extension Length
7.3 inch folded size, convenient for you to take it in your pocket or bag when travel. Extendable length up to 28 inches. Use a short length for intimate shots, or make a longer length to get wider scenery.
Package Includes:
[2 in 1 design] Mini led flashlight with XPE COB side light two lighting methods to meet a variety of environmental needs,With Hanging Rope designed, you can hang it anywhere. 1 Pc of USB LED Light. [USB Rechargeable] The built-in rechargeable 18650 Li-ion battery allows you to continuously use this led tacticol flashlight up to 5 hours after fully charged.. [Waterproof]The led mini flashlight with full waterproof design, O-type sealed waterproof ring, so that the product better waterproof, normal use in heavy rain. [Widely Used]The led cob flashlight is processed three levels of militory hardening treatment, wear resistance, corrosion resistance, non-slip in place. Suitable for hunting, biking, hiking, camping, outdoor activities, etc.. [3 Gear Lighting Modes] XPE strong light, XPE flash light, strong COB light, just press the switch button to switch to any mode to meet different needs.
Package Includes:
Product Description
Note : Product image may vary according to the brand
Package Includes:
Product Description
Bluetooth Light Bulb Speaker
About LED Music Bulb
This Music Bulb Is the best Bluetooth speaker bulb and thus our top choice. This bulb is energy efficient and wireless and you can connect your phone or tablet to it to play music.
Why it’s the best?
This speaker light bulb has a new feature called the dancing light which makes the colorful light dance according to the music rhythm played on the speaker.
Why do we like it?
This product does the job of two items at a time. It has 13 color-changing lights and 4 light modes It provides you with a remote control that can control the lights and the music volume. A single remote can control multiple bulbs at a time.
How to activate a Bluetooth light bulb
- Applied this bulb to the E27 base, and then power the bulb
- The bulb is lit up, then you can use the remote control to adjust the light color
- Turn on your Bluetooth device (you phone etc), search and connect to the bulb
- Connected successfully, now you can play the music you link to the bulb
- Features: Safety Energy-saving, environmental protection, low power, low heat generating
Updated IR controller
The updated remote control makes light bulbs(Light mode)12 color changing lights and 1 white daylight. It has 3 modes which are flash, strobe and fade.
(Music mode) pause/play & adjust volume & next/previous song rely on your willing by remote controller. The effective controlling distance of the Bluetooth speaker lamp is up to 33ft/10m
High-Quality Durable
- Lifespan:55000 hours
- Temperature: 6000K
- Voltage:100-240V/50-60Hz
- Light color: RGBW
- Power:12W/(LED 7W RGB 7W)
Smart Speaker
- A built-in 3W speaker of double magnetic,
- pure and crystal sound.
- The advanced acoustic technology
- delivers a clear sound.
Package Includes:
Product Description :
Hey Electronics DIY geek are you searching for something exciting to build to fulfill your next DIY glut. Here is a new DIY 3D 8S Music Light Cube Kit 8x8x8 Music Spectrum LED Electronic DIY Kit. This is a DIY kit with lots of work to do so you need to have some knowledge of electronics and ability a lot of soldering and should have enough patience to build this amazing 3D animation cube.
To help you in this project I have found the total assembly guide of this project on Instructable Circuits Click Here
Four key functions:
K1 key: Enter the mode selection, day, night mode control
K2 key: Enter the 3D8 PC mode (press the K1 key to be effective after power on)
K3 key: Enter 42 kinds of offline animation mode (press the K1 key to be effective after power on)
K4 key: Enter 14 kinds of off-line audio mode (press the K1 key to be effective after power on)
Three music keys features:
S1 key: Enter the music playback / stop control
S2 key: Enter the previous song / volume decrease control
S3 key: Enter the next song / volume increase control
Circuit design:
STC12C5A60S2 74HC245 74HC138 74HC595N
1. Integrated STC12C5A60S2 high-speed 1T microcontroller
2. 74HC245 buffer driver (cascade connection)
3. 5A high-current MOS tube driver chip (to solve the uneven brightness)
4. High-speed scanning chip and serial control cascade chip
5. Use a professional MP3 music chip
6. Use professional power amplifier chip 8002B
There are two ways to modify the pattern:
1. Modify the program (difficult, you need to understand programming)
2. PC computer software direct manipulation of the light cubic
Note:
- Some parts in the kit may vary from the images shown, in terms of the shape of an LED or cable color but not to worry it won’t affect your project in any way.
- The acrylic case Shown in the image is not included in the package you have to buy it separately
Specifications and Features:
- Built-in 3W amplifier 3W high-quality speaker
- Can be inserted TF memory card to play music
- Can be inserted U disk to play music
- Through the audio line input and output music
- Built-in MP3 music, the volume can be adjusted
- Built-in music can be controlled by a button on the next song
- Built-in 42 kinds of off-line stunning animation (plug in the electricity can run animation)
- Built-in 14 kinds of offline dynamic audio animation (dance with music)
- 3D8 on the machine mode (control animation)
- 13D8 on the machine music mode
- Infrared remote control function
- Night, daytime control mode
- PWM breathing light mode
- Switch on the mainboard automatic detection mode
- Photoresistor automatic dimming function (need to expand by yourself)
- Shell size: 233 * 161 * 161mm
- PCB board: 150 * 150mm
- Input voltage: 5V / 5V charger
- Current: 1A-2A (2A better)
Package Includes:
1 x DIY 3D 8S Music Light Cube Kit 8x8x8 Music Spectrum LED Electronic DIY Kit
Kit Includes:
1 x PCB Baseboard
1 x IR Wireless Remote Control (Battery Included)
1 x USB-A to 5 mm Male DC cable to power the Cube-100cm
1 x 3.5mm Male to 3.5mm Male Audio Cable-30cm
1 x USB to serial TTL interface Module to program the cube
1 x 3 Line Hookup wire, jumper wire
1 x 50 pin female headers
1 x Screws and standoffs set
1 x RGB Square shape 2 x 5 x 7 mm LEDs-512pcs.
2 x 50 pin Female Berg Pin-Straight.
Product description
Product description
Product description
Product description
Automatic Street Light Control System is a simple and powerful concept, which uses transistor as a switch to switch ON and OFF the street light automatically. Easy to operate in day also. Just cover the LDR light sensor with hand and all street lights will glow automatically. Beast suited for Physics working model, school science project.
- 9v batttery is require
- Best suited for those who wish to submit as Physics-Science in School/College. Easy to understand working model with study report in printed form.
This is an LCD 20 x 4 Parallel LCD Display that provides a simple and cost-effective solution for adding a 20 x 4 white on RGB Liquid Crystal Display into your project. The display is 20 character by 4 line display that has a very clear and high contrast white text upon a blue background/backlight.
This is the great blue backlight LCD display. It is fantastic for Arduino-based projects. This LCD 20 x 4 Parallel LCD Display with Blue Backlight is very easy to interface with Arduino or Other Microcontrollers.
The values shown on the display can be either simple text or numerical values read by the sensors, such as temperature or pressure, or even the number of cycles that the Arduino is performing.
Features :
- 20 characters wide, 4 rows
- White text on the Blue background
- Single LED backlight included can be dimmed easily with a resistor or PWM.
- Can be fully controlled with only 6 digital lines! (Any analog/digital pins can be used)
Package Includes :
1 x 20×4 Character LCD Display With Blue Backlight
This is an LCD 20 x 2 Parallel LCD Display that provides a simple and cost-effective solution for adding a 20 x 2 Black on RGB Liquid Crystal Display into your project. The display is 20 character by 2 line display that has a very clear and high contrast black text upon a yellow background/backlight.
This is the great yellow backlight LCD display. It is fantastic for Arduino-based projects. This LCD 20 x 2 Parallel LCD Display with yellow Backlight is very easy to interface with Arduino or Other Microcontrollers.
The values shown on the display can be either simple text or numerical values read by the sensors, such as temperature or pressure, or even the number of cycles that the Arduino is performing.
Features :
- 20 characters wide, 2 rows
- Black text on the Yellow background
- Single LED backlight included can be dimmed easily with a resistor or PWM.
- Can be fully controlled with only 6 digital lines! (Any analog/digital pins can be used)
Package Includes :
1 x 20×2 Character LCD Display With Yellow Backlight
PIXHAWK PX4 2.4.8 Flight Controller W/ SHOCK ABSORBER UBLOX NEO-M8N GPS GPS FOLDING ANTENNA BASE SET Pixhawk Power Module 433MHZ Telemetry PPM Encoder combo Kit gives you all necessary Control component for a quadcopter, in one kit with affordable price and good quality.
PIXHAWK PX4 2.4.7 Flight Controller with SHOCK ABSORBER UBLOX NEO-M8N GPS Pixhawk Power Module PPM Encoder Combo Kit gives you all necessary Control component for a quadcopter, in one kit with affordable price and good quality.
APM 2.8 Flight Controller 2.5 2.6 Upgraded Built-in Compass for FPV RC Drone Aircraft is the new APM 2.8 flight controller. The sensors are exactly the same as the APM 2.6 flight controller, however, this has the option to use the built-in compass, or external compass via a jumper. This makes the APM 2.8 ideal for use with multi-copters and rovers.
The universal vibration damping mount or shock absorber has a list of useful applications. This is free camera mounting to Flight controller isolation. It absorbs vibration, the center supported plate is ideal for sensitive electronics and cameras. The flush flat-bottom mounting allows bolt or tape style attachment.
A new generation Ublox GPS NEO-M8N, with low power consumption and high precision, the ultimate accuracy is 0.6 meters, actually almost 0.9 meters, greater than the previous generation NEO-7N 1.4-1.6 meters accuracy; support GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 protocol, and mode or more.
The GPS Folding Antenna Base mount comes will a laser cut adhesive pad to quickly attached your GPS module, while the mount itself can be fixed to your craft using the base plate M3 hole, or the cross slides.
The APM 2.5 Power Module is a simple way of providing your APM 2.5; with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable.
Package Includes :
1 x APM 2.8 Flight Controller.
2 x Connecting Wires.
1 x Glass Fiber Flight Controller Anti-vibration/Shock absorber Set.
1 x NEO-M8N GPS Module with translucent Shell.
1x GPS Folding Base Antenna set.
1 x APM 2.5.2/2.6/2.8 Pixhawk Power Module V1.0.
Specifications and Features :
APM 2.8 Flight Controller :
- Needle: straight.
- Power supply: LP2985-3.3.
- Max voltage: 16V.
- Add a 47uF tantalum capacitor.
- Port: MUX (UART0, UART2, mnnI2, and OSD are optional, OSD is the defaulted output).
- Arduino Compatible!
- Includes 3-axis gyro, accelerometer, along with a high-performance barometer
- Onboard 4 MegaByte Dataflash chip for automatic data logging.
- Optional off-board GPS, a uBlox LEA-6H module with Compass.
- One of the first open source autopilot systems to use Invensense’s 6 DoF Accelerometer/Gyro MPU-6000.
- Barometric pressure sensor upgraded to MS5611-01BA03, from Measurement Specialties.
- Atmel’s ATMEGA2560 and ATMEGA32U-2 chips for processing and USB functions respectively.
Glass Fiber Flight Controller Anti-vibration/Shock absorber Set :
Features:
- Color: Black
- Material: Glass fiber
- Suit for different open source flight controller, like APM 2.5/2.6/2.8, KK, MWC, and Pixhawk 2.4
- Package Weight: 24 gm.
- Upper Frame size: 90 x 60 x 2 mm(LxWxH).
- Lower Frame Size: 100 x 70 x 2 mm(LxWxH).
- Shock absorber Height: 10 x 12 mm.(DxH).
NEO-M8N GPS Module :
- Receiver type 72-channel u-blox M8 engine.
- GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1.
- SBAS L1 C/A: WAAS, EGNOS, MSAS.
- Galileo-ready E1B/C (NEO-M8N).
- Nav. update rate1 Single GNSS: up to 18 HZ.
- Concurrent GNSS: up to 10 Hz.
- Position accuracy2 2.0 m CEP.
- Acquisition2 Cold start: 26 s.
- Aided starts: 2 s.
- Reacquisition: 1.5 s.
- Sensitivity2 Tracking & Nav: –167 dBm.
- Cold start: –148 dBm.
- Hot starts: –156 dBm.
- Assistance AssistNow GNSS Online.
- Assist Now GNSS Offline (up to 35 days)3.
- Assist Now Autonomous (up to 6 days).
- OMA SUPL & 3GPP compliant
- Oscillator TCXO (NEO-M8N/Q).
- Crystal (NEO-M8M).
- RTC crystal Built-In.
- Noise figure On-chip LNA (NEO-M8M). Extra LNA for.
- lowest noise figure (NEO-M8N/Q).
- Anti-jamming Active CW detection and removal.
- Extra onboard SAW bandpass filter (NEO-M8N/Q).
- Memory ROM (NEO-M8M/Q) or Flash (NEO-M8N).
- Supported antennas Active and passive.
- Odometer Travelled distance.
- Data-logger For position, velocity, and time (NEO-M8N).
GPS Folding Base Antenna set :
- Material: CNC Aluminum alloy, carbon glass fiber rod
- Mounting rod diameter: 4mm
- length of rod: 14 cm.
- GPS plate diameter: 40 mm.
- Base plate diameter: 35 mm
- Mounting hole spacing: 16-35mm
- Weight: 20g
- Colour: Anodised black
- Note: Adhesive Pad is not included.
APM 2.5.2/2.6/2.8 Pixhawk Power Module V1.0 :
- Max input voltage: 28V
- Max current sensing: 90A
- Voltage and current measurement configured for 5V ADC
- Switching regulator outputs 5.3V and 3A max
- 6-pos DF13 cable plugs directly to APM 2.5’s ‘PM’ connector
- Support 6S battery
Build your small indoor DIY done with this QX95 Quad-copter Combo Kit. This is QX95 Brushed Quad-copter Combo Kit will help you become a quadcopter pilot. Simply get out the soldering iron, put on your safety goggles, and began soldering. This kit has very good products and is available at an affordable cost.
For someone new to the multirotor hobby, putting together your first quadcopter parts list and bringing them home can be extremely daunting. Trying to figure out what to buy and what parts will work together is tough, especially for people who don’t come from a background in radio-controlled planes or helicopters. For the people who want to build a quadcopter but don’t know where to start. It can be frustrating trying to sort things and figure out what to do.
We’ve heard from a lot of people who are in similar positions and this bunch of products is designed to spell out exactly what you need for your quadcopter build. While we will recommend a complete list of specific parts that we have tested for a complete quadcopter build, the main purpose of providing a Brushed Quad-copter Combo Kit needed to build a quadcopter. Here’s what the kit contains
QX95 Brushed Quad-copter Frame
Every quadcopter or other multirotor aircraft needs a frame to house all the other components. Things to consider here are weight, size, and materials. This QX95 Brushed Quad-copter Frame is a well thought out brushed quad frame built from quality materials.
55mm (2.2inch) Blade Propeller Propeller for 6x15mm, 7x20mm 8.5x20mm Coreless Motor DIY Micro Quadcopter
These are 55mm (2.2inch) Blade Propeller Propeller for 6x15mm, 7x20mm 8.5x20mm Coreless Motor DIY Micro Quadcopter. The propellers with a 0.95mm mounting hole can be firmly mounted onto 1mm 4-axial motors.
8520 Magnetic Micro Coreless Motor for Micro Quadcopters – 2xCW & 2xCCW
If you are new in the multirotor/drone hobby area and want to try out some basic multirotor designs so as to enhance your basic knowledge about multirotor!!! Don’t wait and get this combo of 8520 Magnetic Micro Coreless Motor for Micro Quadcopters – 2xCW & 2xCCW.
This LM393 Photosensitive Light-Dependent Control Sensor LDR Module is using a high-quality LM393 voltage comparator. Easy to install using the sensitive type photosensitive resistance sensor the comparator output signal gives a clean and good waveform.
Driving ability is 15mA with the adjustable potentiometer, it can adjust the brightness of the light. Working voltage is 3. 3V to 5v. Where output is a digital switch output. Since this module is sensitive to the light, usually used for detecting the ambient brightness and light intensity.
You can use this board digital output DO port drive relay module directly(our store on sale these relay modules), and can also use as a photoelectric switch. The analog output ao connects with ad module and it can get more precise light intensity value through the ad-converter.
Interface Pin :
- VCC: Positive power supply
- GND: Ground
- D0: Digital output signal
- A0: Analog Output Signal
Strong light, LED light, output low level;
Weak light, LED off, output high level;
Sensitivity is adjustable.
Features :
- It comes with Mounting Hole Screw
- Easy to install
- Signal output indicator light.
- LDR module 4 PIN
- Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment)
- Output: DO digital switch output (0 and 1), AO analog voltage output Compatible with Arduino, Raspberry, and other microcontroller board
Package Includes :
- 1 x LM393 Photosensitive Light-Dependent Control Sensor LDR Module
The resistance of 12mm GL12528 Light Sensitive Photoresistor LDR changes with the change in the ambient light exposed on the surface of the sensor. As the light on the sensor increases then the resistance across the two leads decreases. Light Dependent Resistor is a type of photocell which finds excellent use in light sensing device application, whether it is automatic outdoor light ON/OFF switch or indoor automatic light switch; moreover, the 12mm LDR or photoresistor sensor works best in both light and dark regions. The photo-resistors are a staple of electronics. If you need a way to sense the level of ambient light then there is no easier way to do it without an LDR/photo-resistor.
Two Cadmium Sulphide Photo Conductive Cells with spectral responses similar to that of the human eye. Cell resistance falls with increasing light intensity. Applications of this product include smoke detection, automatic lighting control, batch counting, and burglar alarm systems. Furthermore, some of the applications are given below.
Analog Applications :
- Camera exposure control
- Auto slide focus – dual cell
- Photocopy machines – the density of the toner
- Colorimetric test Equipment
- Densitometer
- Electronics scales – dual cell
- Automatic gain control – modulated light source
- Automated rearview mirror
Digital Applications :
- Automatic headlight dimmer
- Nightlight control
- Oil burner flame out
- Streetlight control
- Absence/presence (beam breaker)
- Position sensor
Other Applications :
- Annunciator
- Camera automatic photometry
- Electronic toy
- Industrial control
- Light control
- Light control lamp
- Photoelectric control
- Switch
Features :
- Spectral peak: 560nm
- Maximum voltage: 250 VDC
- Maximum wattage: 200 mW
- Operating temperature: -30˚C ~ 70˚C
- Light resistance (10 Lux): 10-20 KΩ
- Dark resistance: 2 MΩ
- Resistance illumination: 3
- Response time: 20ms (Rise), 30ms (Down)
Package Includes :
- 2 x 12mm GL12528 Light Sensitive Photoresistor LDR (2Pcs)