Search

• Package: 10pcs Female DC Power Jack Panel Mount with Hex Nut
• DC Power Jack Panel Mount Screw Nut Kit DC Socket Electrical Plug
• The DC power jack panel mount screw nut kit has 3 pin soldering terminal.
• Widely suitalbe for small appliances products, auto parts, audio accessories, such as: Media Player, MP3/MP4 player, Audio-Video Equipment, AV Equipment, Note Book, Mobile Phone, Smart Phone, Car Audio, and so on.
• Material: Metal, Plastic Color: Silver Tone, Black

Product Details:

• Triacs Belong To The Thyristor Family And Are Closely Related To Silicon-Controlled Rectifiers (Scr). However, Unlike Scrs, Which Are Unidirectional Devices (I.E. Can Conduct Current Only In One Direction), Triacs Are Bidirectional And So Current Can Flow Through Them In Either Direction.
•  Another Difference From Scrs Is That Triacs Can Be Triggered By Either A Positive Or A Negative Current Applied To Its Gate Electrode, Whereas Scrs Can Be Triggered Only By Currents Going Into The Gate. In Order To Create A Triggering Current, A Positive Or Negative Voltage Has To Be Applied To The Gate With Respect To The A1 Terminal (Otherwise Known As Mt1).

• Once Triggered, The Device Continues To Conduct Until The Current Drops Below A Certain Threshold, Called The Holding Current.

• The Bidirectionality Makes Triac Very Convenient Switches For Ac Circuits, Also Allowing Them To Control Very Large Power Flows With Milliampere-Scale Gate Currents. In Addition, Applying A Trigger Pulse At A Controlled Phase Angle In An Ac Cycle Allows One To Control The Percentage Of Current That Flows Through The Triac To The Load (Phase Control), Which Is Commonly Used, For Example, In Controlling The Speed Of Low-Power Induction Motors, In Dimming Lamps And In Controlling Ac Heating Resistors

•  Mobile App Based Dimming- The Customer Sitting In Any Part Of The Room/ House Can Control The Intensity Of The Light By Using His Mobile App
•  The Manual Mode Facilitates Control By Varying The Triac Manually Through The Knob Provided In The Control Unit.

•  Wifi App Based Dimming
•  Occupancy Based Dimming

Product Details:

12V 24V 10A solar charge controller for solar panelsAuto Day/Night Sensor / Programmer, Program Timer, PWM, MCU, Auto 12V/24V Selector Switch

• Overcharge protection
• Can be used for any panels Mono/Poly/Multi Crstalline
• Discharge protection
• Short and Open Circuit protection
• Full specification Provided in Catalogue for Auto/Day/Night Selection, Program Timer Selection
• Fail Safe and cannot be damaged by accidental wiring mistakes
• Advanced design with simple plug and play technology. No need for complicated adjustments
• Full LED status indication: State of Charge(SOC) Red-Flat Battery: Amber-Low charge: Green- good charge: Green Flashing- Full Charge

Product Information:

The RC-10 Series Solar Charge Controller is a Micro-Controller Unit(MCU) based digital controller which will charge your battery in a healthy Pulse Width Modulation(PWM) 3-Stage mode viz. Bulk, Equalization, and Float Charging. The multi-color LED indicates the level of the Battery and charging status. It automatically disconnects the load when battery is low. The load/light can be controlled in a dusk-to-dawn mode or in timer mode with digital accuracy. It automatically connects the load at sunset and disconnects at sunrise. This feature is very useful for 12/24V DC solar lighting purposes. The controller also has user-friendly LED indicators for Solar Charging status, Battery status, and Load status. It also has an 8-Segment LED Display for load control mode information. For technical specifications of this device please refer the details below.

Caution to Everyone:

Many of the low cost Solar Charge controllers in the market do not feature "Intelligent Micro Controller Unit PWM Charging". Most are Shunt Chargers(Non PWM Algorithm, Simple On/Off) which are not good for battery life unlike PWM Chargers. Shunt Chargers are "Obsolete" in other parts of the world, but sadly in India its still used. So do acknowledge the difference between the two.

PWM Solar Charge Controller Features:

• MCU controlled digitally accurate device with 12V/24V auto distinguish
• State of Charge, Battery Level Indicator, Load status indication via 3 Multi-color LEDs
• Protects your batteries from Overcharging or Over Discharge, thereby increasing their working life
• Charges battery in PWM Control 3 Stage - Bulk, Equalization, and Float Charging
• Prevents Reverse Current to Solar Panels during Night time
• Easy to install, lightweight, and very compact in size
• Temperature compensation
•  Dusk-to-dawn and timer controlled loading mode
• Short Circuit and overload protection
• Works with conventional flooded lead acid batteries, Tubular, Deep Cycle, SMF batteries, Gel and AGM batter

Product Details:

12V 24V 20A solar charge controller for solar panelsAuto Day/Night Sensor / Programmer, Program Timer, PWM, MCU, Auto 12V/24V Selector Switch.

• Overcharge protection
• Can be used for any panels Mono/Poly/Multi Crstalline
• Discharge protection
• Short and Open Circuit protection
• Full specification Provided in Catalogue for Auto/Day/Night Selection, Program Timer Selection
• Fail Safe and cannot be damaged by accidental wiring mistakes
• Advanced design with simple plug and play technology. No need for complicated adjustments
• Full LED status indication: State of Charge(SOC) Red-Flat Battery: Amber-Low charge: Green- good charge: Green Flashing- Full Charge

Product Information:

The RC-10 Series Solar Charge Controller is a Micro-Controller Unit(MCU) based digital controller which will charge your battery in a healthy Pulse Width Modulation(PWM) 3-Stage mode viz. Bulk, Equalization, and Float Charging. The multi-color LED indicates the level of the Battery and charging status. It automatically disconnects the load when battery is low. The load/light can be controlled in a dusk-to-dawn mode or in timer mode with digital accuracy. It automatically connects the load at sunset and disconnects at sunrise. This feature is very useful for 12/24V DC solar lighting purposes. The controller also has user-friendly LED indicators for Solar Charging status, Battery status, and Load status. It also has an 8-Segment LED Display for load control mode information. For technical specifications of this device please refer the details below.

Caution to Everyone:

Many of the low cost Solar Charge controllers in the market do not feature "Intelligent Micro Controller Unit PWM Charging". Most are Shunt Chargers(Non PWM Algorithm, Simple On/Off) which are not good for battery life unlike PWM Chargers. Shunt Chargers are "Obsolete" in other parts of the world, but sadly in India its still used. So do acknowledge the difference between the two.

PWM Solar Charge Controller Features:

• MCU controlled digitally accurate device with 12V/24V auto distinguish.
• State of Charge, Battery Level Indicator, Load status indication via 3 Multi-color LEDs
•  Protects your batteries from Overcharging or Over Discharge, thereby increasing their working life· Charges battery in PWM Control 3 Stage - Bulk, Equalization, and Float Charging
•  Prevents Reverse Current to Solar Panels during Night time
•  Easy to install, lightweight, and very compact in size
•  Temperature compensation
•  Dusk-to-dawn and timer controlled loading mode
• Short Circuit and overload protection
• Works with conventional flooded lead acid batteries, Tubular, Deep Cycle, SMF batteries, Gel and AGM batter.

Product Details:

Matching with the changing and increasing needs of customers, we are providing a large range of Solar Panel. Our product is used in soar appliances for storing solar energy. The solar panel we offer is composed of high quality mono or multi crystalline cells. This panel is embedded in highly transparent EVA, covered by tempered glass and surrounded by a strong aluminum frame. The result is maximum protection against hostile environments and prepares the modules for outside installations.

Features:

• High in demand
• Effective
• Technically advanced

Product Details:

TRIACs belong to the thyristor family and are closely related to Silicon-controlled rectifiers (SCR). However, unlike SCRs, which are unidirectional devices (i.e. can conduct current only in one direction), TRIACs are bidirectional and so current can flow through them in either direction. Another difference from SCRs is that TRIACs can be triggered by either a positive or a negative current applied to its gate electrode, whereas SCRs can be triggered only by currents going into the gate. In order to create a triggering current, a positive or negative voltage has to be applied to the gate with respect to the A1 terminal (otherwise known as MT1).
Once triggered, the device continues to conduct until the current drops below a certain threshold, called the holding current.
The bidirectionality makes TRIAC very convenient switches for AC circuits, also allowing them to control very large power flows with milliampere-scale gate currents. In addition, applying a trigger pulse at a controlled phase angle in an AC cycle allows one to control the percentage of current that flows through the TRIAC to the load (phase control), which is commonly used, for example, in controlling the speed of low-power induction motors, in dimming lamps and in controlling AC heating resistors.

TWO Modes of LED PANEL LIGHT DIMMING:

• Mobile APP based dimming- The customer sitting in any part of the room/ house can control the intensity of the light by using his mobile app
• The manual mode facilitates control by varying the triac manually through the knob provided in the control unit.

Optional:

• wifi App based dimming
•  Occupancy based dimming

Product Details:

This motor MCC Panel is exclusive tailor made product & is designed as per requirement of customer. Nos. of motors are started from this panel center & mostly these are DOL or Star- delta Starter motors. All the push buttons & indicators are mounted on panel or remote controlled.

Features:

• Simplex & Duplex pattern
• Degree of Protection: IP-42 to IP-65
• Painting: Powder Coating / Spray Paint / Epoxy Paint
• Compartmentalized design eliminates risk to maintenance personal
• Sufficient space for incoming and outgoing cables
• Provided with buzzer & hooter during emergency
• Separate Bus bar and cable chambers
• Motor Control Center shall have hinged door with lockable arrangement
• Motor Control Center Available with Aluminum / copper bus bar
• Motor Control Center is suitable for use on 415V, 3 Phase, 4 wire, 50Hz

Application:

These are widely used for:

• Protection against electrical Short Circuit, overload and earth fault of the system
• Control & monitoring of the entire electrical system of an industry / plant
• Systematic power catering to various load of an electrical system
• Normally used in Hospitals, Multi-storied buildings, steel industries, cement industry, open –cast mines, shopping mall etc.

We offer the following options and facilities:

• ASTA certified bus bar systems (50 KA for 1 sec as standard).
• Separation: Form 4 Type 2 as standard but types 3, 6 and 7 available if required
• Ingress protection up to IP 65
• Wall mounting or floor standing
• Top, bottom or special cable entry
• Front or rear cabling access
• Fixed, plug in or with drawable type
• Full range of instruments and metering to customers requirements
• Contactor, soft start and variable speed drives
• Local or remote control
• Wired to separate terminal chambers
• Facilities for thermal imaging
• Local or remote manual controls
• Relay or PLC automatic controls
• Alarm systems
• Alarm annunciators
• BMS interface
• Special control systems to customers requirements

Product Details:

We manufacture and supply PCC Panel that is used to control the power supplied to motors and transformers. Our PCC panel is a power distribution board that can be used to control the power supplied to HT motors, MCC panels and transformers who play vital role in any electrical control system. They find application in refineries, chemical plants, dairies, refrigeration plant, pharmaceuticals and plastic industries.
Features:

• Made of high quality materials and components
• Error-free performance
• High efficiency

Product Details:

We manufacture and supply PCC Panel that is used to control the power supplied to motors and transformers. Our PCC panel is a power distribution board that can be used to control the power supplied to HT motors, MCC panels and transformers who play vital role in any electrical control system. They find application in refineries, chemical plants, dairies, refrigeration plant, pharmaceuticals and plastic industries.
Features:

• Made of high quality materials and components
• Error-free performance
• High efficiency

Product Details:

System Architecture:

• Control Room
• LT Panel Room
• 33 KV Switch Yard
• 2 nos. Frances Turbine Units.
• Remote Terminal Connectivity on IEC-60870-5-101
• PLC Panel Connected with Switch Yard, LT Panels And all Field Instruments.

Control Features on SCADA:

• Hydro Turbine Governing
• Hydro Turbine Synchronising
• Hydro Turbine Control and Safeties
• HT Feeders on on/of Control.
• Generator Breakers on/off Control.
• Isolator on/off Control
• Turbine Auto Start/Stop Control
• Load Raise/ Load Lower Control
• Remote Terminal Control On Units.

Display Features:

• On/off Status For All Incomers And Outgoing Feeders.
• Tripping Status For All Incomers And Outgoing Feeders.
• Tripping Status For All Protection Relays.
• Charged Bus Bar Status.
• Voltage, Current, KWH, HZ, KW, Kvar Display For All Feeders
• Units Tripping Status
• Generator Parameters Display
• Turbine Parameters Display
• OPU Parameters Display
• GLOP Parameters Display
• Switch Yard Parameters Display.

Data Logging Features:

• Time Base Data Logging Facility
• Shift Wise Data Logging.
• Event Data Logging.
• Alarm Data Logging.
• Turbine Running Hour Data Logging
• Turbine, Generator, Transformer And Bus Bar Temperature Data Logging.

Trending:

• Current Trending For Power Parameters(Voltage, Current, KW)
• Historical Trending For Power Parameters.

Report Printing:

• Trend Screen Printing
• Shift Report Printing
• Historical Data Printing For Logged Power Parameters, Alarm And Events

Product Details:

With an aim to stand tall on the expectations of our esteemed clients, we are Operator Panels actively committed towards offering a wide assortment of quality assured HMI. These HMI Operator Panels are precisely manufactured at our sound and facility-enriched manufacturing unit using high grade raw material and cutting edge technology. Further, we test these panels against various quality parameters to ensure their durability and finish. Perfectly designed, these HMIsare offered at industry competent prices.
Features:

• Trouble free operation
• Easy synchronization
• Withstand fluctuation of voltage

Product Details:

We present a high quality PLC Panel that is highly acclaimed in the national and international market for long lasting excellent performance.

Our PLC based control panel provides maximum output and consumes low electricity. These salient features of our PLC based control panel make it perfect for automatic filter press. Compact in designs.

Our PLC based control panel is technically advanced and needs no maintenance. We are counted among the supreme basic PLC control panel manufacturers, based in India.

Features:

• High speed processor
• Compact size - I/O capacity up to 8,192 I/O points
• Large program capacity up to 128 Step
• Allows up to 16 rack expansion
• Provides more than 400 program instructions
• Supports redundant system configuration
• Compatibility between PLC's of each series
• Easy expansion through Ethernet
• Open network architecture

Product Details:

We are the leading manufacturer of Fire Fighting Panel that is considered technologically superior and among the best available in the industry. The panel is battle-ready for sudden fire breakout. They can be powered by diesel or electric motors and can function automatically when the need to trigger the operation is needed. Engine starts relay and engine interlocks are covered properly for better safety of operations.

Features:

• Easy to operate
• Resistant to shock
• High performance

Product Details:

We specialize in manufacturing and supplying a wide range of PLC Automation Control Panels. Our product is available in both customized designs and standard designs as per the exact requirements of clients. This control panel is engineered as per world class standards and using best available technologies. It is extensively recommended by clients owing to its less maintenance cost and longer functional life.


Features:

•     Customized designs
•     Low maintenance
•     Availability in various specifications

Other Information:

•     Pay Mode Terms: L/C (Letter of Credit)
•     Minimum Order Quantity: 1 Enter Unit Type
•     Delivery Time: Within a month

Product Details:

We are engaged in offering Drive Automation Control Panels that is based on advanced technology and find application in different industries. This control panel is designed to operate on its own i.e. give command out put to drive valves/motors/ alarm etc in industrial process based on the feed back given by different process Instrument. Our range of control panel is in compliance with set industry standards.

Features:

• Robust structure
• Cabinet available in various material
• Digitally controlled system

Product Details:

•  Repetitive operations
•  Time-driven operations
•   Event-driven operations
•   High-speed control