Search

This RC522 RFID Card Reader Module 13.56MHz is a low-cost MFRC522 based RFID Reader Module is easy to use and can be used in a wide range of applications.

The MFRC522 is a highly integrated reader/writer IC for contactless communication at 13.56 MHz.

RC522 is the highly integrated RFID card reader which works on non-contact 13.56mhz communication, is designed by NXP as low power consumption, low cost and compact size read and write chip, is the best choice in the development of smart meters and portable hand-held devices.

MF RC522 use the advanced modulation system, fully integrated at 13.56MHz with all kinds of positive non-contact communication protocols. Support 14443A compatible answer signal. DSP deal with ISO14443A frames and error correction. Furthermore, it also supports rapid CRYPTO1 encryption to validate Mifare series products. MFRC522 support Mifare series higher speed non-contact communication, duplex communication speed up to 424 kb/s. As a new family member in 13.56MHz RFID family, MF RC522 has many similarities to MF RC5200 and MF RC530 and also has more new features.

This module can fit directly in handheld devices for mass production. The module uses the 3.3V power supply and can communicate directly with any CPU board by connecting through SPI protocol, which ensures reliable work, high reading distance.

• Integrated MF RC522
• 13.56MHz contactless communication card chip
• The low-voltage, low-cost, small size of the non-contact card chip to read and write
• Suitable for Smart meters and portable handheld devices
• Advanced modulation and demodulation concept completely integrated into all types of 13.56MHz passive contactless communication methods and protocols
• 14443A compatible transponder signals
• ISO14443A frames and error detection
• Supports rapid CRYPTO1 encryption algorithm, terminology validation MIFARE products
• MFRC522 support MIFARE series of high-speed non-contact communication, two-way data transmission rate up to 424kbit/s
• Low cost, and ideal for user equipment development
• The reader and RF card terminal design meet advanced applications development and production needs
• Can be directly loaded into the various reader molds, very convenient

• 1 x RC522 RFID Card Reader Module 13.56MHz

RFID Reader/Writer RC522 SPI S50 CARD AND KEYCHAIN which works on non-contact 13.56mhz communication, is designed by NXP as low power consumption, low cost, and compact size read and write chip, is the best choice in the development of smart meters and portable hand-held devices.

It uses an advanced modulation system, fully integrated at 13.56MHz with all kinds of positive non-contact communication protocols. Support 14443A compatible answer signal. DSP deals with ISO14443A frames and error correction.

This module can fit directly in handheld devices for mass production. The module uses the 3.3V power supply and can communicate directly with any CPU board by connecting through the SPI protocol, which ensures reliable work, good reading distance.

• Highly integrated analog circuitry to demodulate and decode responses
• Supports ISO/IEC 14443 A/MIFARE
• Typical operating distance in reading/Write mode up to 50 mm
• Supports ISO/IEC 14443 A higher transfer speed communication up to 848 kBd
• SPI up to 10 Mbit/s
• FIFO buffer handles 64 bytes send and receive
• Flexible interrupt modes
• Power-down by software mode
• Programmable Timer
• 2.5 V to 3.3 V power supply
• CRC coprocessor
• Internal self-test

• 1 x RFID-RC522 Reader/Write Module
• 1 x Standard blank RFID card
• 2 x A Straight & right-angle header strip
• 1 x Special-shaped keychain RFID tag

Silicone Wristband RFID Bracelet Tag For Access Control Swimming Pool And Marathon is used for RFID applications. Ideal for Water park, Swimming pool, Massage room, Club membership, Lockers, Office and Building access control. RFID Wristband (or Bracelet) have various design, it is light, colorful, smooth shape, easy to carry unconsciously, Waterproof RFID wristband is suitable for people underwater Comfortable.

How Much Data Can an RFID Tag Store?

An important element in how RFID wristbands work is storage capacity. The largest passive RFID tags can store up to 3720 bytes, or 3.72 kilobytes of information. That may seem like a small amount, but that is enough to store your name, address, credit card numbers, date of birth, and whatever identifying information the local administrator wants to track.

Ultra-high frequency tags can store up to 8 kilobytes of information, but such tags are typically reserved for use in the aerospace industry. For wristbands and access control systems, RFID tags typically are 3 kilobytes or smaller and do not contain sensitive information such as your social security number.

Data you sometimes find stored on RFID tags can include identification credentials, purchasing credits, vouchers, and even social media integration. So when you walk through a checkpoint, you can choose to have your activity posted to social media automatically. For hotels, an RFID system can even replace keycards for access control.

• Material: 100% SGS approval silicone, PPS high-temperature materials RFID Laundry Tag
• Printed: Screen printed, debossed, embossed
• Storage Temperature: -20°C～200°C

• Low Frequency (LF): 125KHz: TK4100, EM4200, EM4305, T5577, HID 26BIT
• High Frequency (HF): 13.56MHz: Mifare 1K S50, Mifare 4K S70, I CODE SLI, I CODE SLIX, Ultralight, Ultralight C, NTAG 203, NTAG 213, NTAG 215, NTAG 216
• Ultra High-Frequency 860-960MHz (UHF): Alien H3, Unicode Gen2

• 1 x Silicone Wristband RFID Bracelet