Search
Search Criteria
Products meeting the search criteria
The Cligo Smart Robot Car Kit is a great way to get started with four motor robotics and sensor integration using the Arduino programming language. The kit includes everything you need. This Arduino robot kit will teach you how to drive your Arduino robot car, how to have it follow lines, how to control it remotely, and more. This kit doesn’t require previous programming or electronics experience but it is recommended that you possess an understanding of or desire to learn about robotics.
Also, this Arduino robot acts as a gateway to design and implement various robotics projects using Arduino.
Easy to Assemble:
The Cligo 4WD Chassis is a durable and modular robot platform from EasyMech. The chassis plates and mounts are cut from ABS plastic and utilize sensors, controllers, power, etc. Simply snap each panel together and you’ll be able to attach your motors, sensors and robotics controller.
Attention – Cligo does not require any additional tools for its assembly. The Cligo kit comes with a screwdriver, which you will need to mount servo motor. Do not attempt to remove chassis parts by squeezing them with pliers. You will break the small nubs.
Package Includes:
1 X Cligo 4WD ABS chassis
4 X 100 RPM BO Motor-Straight
4 X 65mm Robot Wheel Grade B for BO Motors (Yellow)
1 X SmartElex RLS-06 Analog & Digital Line Sensor Array
1 X Tower Pro SG90 1.2kgCm 180 Degree Rotation Servo Motor
1 X SmartElex L298N Motor Driver with On-board Arduino Uno.
2 X Orange ICR 18650 2500mAh Lithium-Ion Battery
1 X 18650 x 2 battery holder with cover and On/Off Switch With DC jack
1 X HC-SR04-Ultrasonic Range Finder
1 X EasyMech Snap-fit ABS Bracket for HC-SR04 Ultrasonic Sensor
1 X Tomo V6-2 Dual USB 2 Slots Battery Intelligent Charger for AA / AAA / 18650 Batteries Black
1 X 20cm DuPont Wire Color Jumper Cable, 2.54mm 1P-1P Male to Female 40PCS
1 X 20cm DuPont Wire Color Jumper Cable, 2.54mm 1P-1P Female to Female 40PCS
1 X Infrared IR Wireless Remote Control Module Kit for Arduino
1 X 2 in 1 Philips Screw Driver for DIY Robot Car
1 X 50 cm Micro USB Cable
1 X 8mm Spiral Wrapping Band Black for Wires (cm)
1 X 3M Multipurpose Double Sided Sponge Glue Adhesive Dash pad 1 pcs
1 X Manual
This car needs to be assembled and does NOT include Raspberry Pi and battery.
(Refer to "About_Battery.pdf" in downloaded file to buy battery.)
Overview:
This is a programmable car kit, which has multiple functions.
Whether you want to experience the joy of robots or learn to program, this is a good choice.
We provide free technical support to help you with any questions and problems.
Supported Models:
* Recommended:
Raspberry Pi 4B / 3B / 3B / 3A
* Also compatible but needs extra parts (refer to tutorial for details):
Raspberry Pi 2B / B / A / Zero 1.3 / Zero W
(Note: Raspberry Pi is NOT included in this kit.)
Remote Control:
You can use the following devices to control this car:
* Computer:
Laptop or desktop. (Run Windows, macOS or Raspberry Pi OS.)
(Refer to tutorial for details.)
* Android device:
Android phone or tablet. (Run Android 4.4 or later, installed Freenove App.)
(Search Freenove on Google Play.)
* iPhone:
(Run iOS 10 or later, installed Freenove App.)
(Search Freenove on App Store.)
Package Includes:
1 x 4WD Smart Car Board for Raspberry Pi
1 set Machinery Parts (9 kinds)
2 x Servo Package
4 x Driven Wheel
4 x DC Speed Reduction Motor
4 x Motor Bracket Package
1 set Acrylic Parts for Pan Tilt
1 x Line Tracking Module
1 x Camera
1 x Ultrasonic Module
1 x Connection Board
1 x Jumper Wire F/F(4)
1 x XH-2.54-5Pin Cable
1 x Cross Screwdriver (3mm)
1 x Black Tape
1 x Cable Tidy (25cm)
The 8MP Raspberry Pi Official Camera Module v2 can be used to take high-definition video, as well as stills photographs. It uses high quality 8 megapixel Sony IMX219 image sensor custom designed add-on board for Raspberry Pi, featuring a fixed focus lens. It is capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video.
Raspberry Pi Camera V2 attaches to Pi by way of one of the small sockets on the board upper surface and uses the dedicated CSI interface, designed especially for interfacing to cameras. It is suitable for mobile or other applications where size and weight are important.
It connects to Raspberry Pi by way of a short ribbon cable. Its easy to use for beginners. The camera works with all models of Raspberry Pi 1, 2, and 3. It can be accessed through the MMAL and V4L APIs, and there are numerous third-party libraries built for it, including the Pi camera Python library.
The camera module is very popular in home security applications, and in wildlife camera traps.
The5MP Raspberry Pi Zero W Camera Module W/ HBV FFC Cable equips flexible cable for attaching with Raspberry Pi Zero W. The 5MP camera module is perfect for small Raspberry Pi projects which have very little space allowance just boot up the latest version of Raspbian and you are good to go!!!
The high-definition 5MP camera delivers outstanding photos but can also shoot video, ideal for drones or a CCTV project. The lightweight camera module allows for it to be used in more practical roles, such as a hidden camera or even a camera for a Pi-phone, for example.
This Raspberry Pi Camera Module is a custom designed add-on for Raspberry Pi. It attaches to Raspberry Pi by way of one of the two small sockets on the board upper surface. This interface uses the dedicated CSI interface, which was designed especially for interfacing to cameras. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data.
The board itself is tiny, at around 25mm x 23mm x 8mm. It also weighs just over 3g, making it perfect for mobile or other applications where size and weight are important. It connects to Raspberry Pi by way of a short flexible ribbon cable. The camera is connected to the BCM2835 processor on the Pi via the CSI bus, a higher bandwidth link which carries pixel data from the camera back to the processor. This bus travels along the ribbon cable that attaches the camera board to the Pi.
The sensor itself has a native resolution of 5 megapixels and has a fixed focus lens onboard. In terms of still images, the camera is capable of 2592 x 1944 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video.
No adapters required! This camera will plug directly into the Raspberry Pi Zero (or ZeroW) camera port!
Important Note!! This module is only capable of taking pictures and video, not sound.
Featuring the same 8-megapixel image sensor as the standard Raspberry Pi camera with the infrared cut-off filter removed to increase IR light sensitivity. The Pi NoIR is compatible with all Raspberry Pi models and provides high
definition, high sensitivity, low crosstalk, and low noise image capture in an ultra small and lightweight design. The camera module connects to the Raspberry Pi board via the CSI connector which is capable of extremely high data rates and it exclusively carries pixel data to the processor.
The infrared Camera Module v2 (Pi NoIR) replaced the original PiNo IR Camera Module in April 2016. The v2 Pi NoIRhas a Sony IMX219 8-megapixel sensor (compared to the 5-megapixel OmniVision OV5647 sensor of the original camera).
The Pi NoIR gives you everything the regular Camera Module offers, with one difference: it does not employ an infrared filter. (NoIR =NoInfrared.) This means that pictures you take by daylight will look decidedly curious, but it gives you the ability to see in the dark with infrared lighting.
We bundle a little square of blue gel with the Pi NoIR, which you can use with the camera to monitor the health of green plants. The Pi NoIR is very popular among wildlife hobbyists: with a few infrared LEDs, you can monitor what nocturnal animals are doing in your garden without disturbing them.
The camera works with all models of Raspberry Pi 1, 2, and 3. It can be accessed through the MMAL and V4L APIs, and there are numerous third-party libraries built for it, including the Pi camera Python library.
This Aluminum 4WD Chassis is a simple yet versatile robot chassis designed specifically for students to make various robotics purpose. Featuring a heavy-duty chassis designed with large internal volume, numerous holes, and mounting points, providing plenty of space to carry a PCB board and any additional components that you choose.
Features and Specifications:-
- Designed for 4 Motors, 4 Wheels, 4 wheels Robotics purpose / Platform DIY Kit
- DC Motor can be directly mounted
- The metal body has holes for mounting motors and wheels
- High-quality metal robot chassis for making DIY robots
The 100 RPM Single Shaft L- Shaped BO Motor motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors.
Small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & light weight makes it suitable for in-circuit placement. This motor can be used with 69mm Diameter Wheel for Plastic Gear Motors.
It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-12V and is perfect for building small and medium robots.
The motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car. They are commonly used in our 2WD platforms.
Nut and threads on the shaft to easily connect and internally threaded shaft for easily connecting it to the wheel.DC Geared motors with robust metal gearbox for heavy-duty applications, available in the wide RPM range and ideally suited for robotics and industrial applications.Very easy to use and available in standard size. Nut and threads on the shaft to easily connect and internally threaded shaft for easily connecting it to the wheel.
FEATURES :
- Directly build complex mechanical assemblies using servos
- Compatible with MG996, MG995 and other similar sized servo motors
- Material: 2mm Aluminum
- Surfacing: Sandblasting oxidation
- Weight: 17g
- Color: Black
FEATURES :
- Directly build complex mechanical assemblies using servos
- Compatible with MG996, MG995 and other similar sized servo motors
- Material: 2mm Aluminum
- Surfacing: Sandblasting oxidation
- Weight: 17g
- Color: Black
FEATURES :
- Directly build complex mechanical assemblies using servos
- Compatible with MG996, MG995 and other similar-sized servo motors
- Material: 2mm Aluminum
- Surfacing: Sandblasting oxidation
- Weight: 17g
- Color: Black
FEATURES :
- Directly build complex mechanical assemblies using servos
- Compatible with MG996, MG995 and other similar sized servo motors
- Material: 2mm Aluminum
- Surfacing: Sandblasting oxidation
- Weight: 14g
- Color: Black
FEATURES :
- Directly build complex mechanical assemblies using servos
- Compatible with MG996, MG995 and other similar sized servo motors
- Material: 2mm Aluminum
- Surfacing: Sandblasting oxidation
- Weight: 7g
- Color: Black
FEATURES :
- Directly build complex mechanical assemblies using servos
- Compatible with MG996, MG995 and other similar sized servo motors
- Material: 2mm Aluminum
- Surfacing: Sandblasting oxidation
- Weight: 6g
- Color: Black
FEATURES :
- Directly build complex mechanical assemblies using servos
- Compatible with MG996, MG995 and other similar sized servo motors
- Material: 2mm Aluminum
- Surfacing: Sandblasting oxidation
- Weight: 50g
- Color: Black
FEATURES :
- Directly build complex mechanical assemblies using servos
- Compatible with MG996, MG995 and other similar sized servo motors
- Material: 2mm Aluminum
- Surfacing: Sandblasting oxidation
- Weight: 20g
- Color: Black
FEATURES :
- Directly build complex mechanical assemblies using servos
- Compatible with MG996, MG995 and other similar sized servo motors
- Material: 2mm Aluminum
- Surfacing: Sandblasting oxidation
- Weight: 21g
- Color: Black
