Search
Search Criteria
Products meeting the search criteria
Digital Programmable Timer | Electronic Timer Energy Saving Socket Type | Digital Programmable Plastic Electronic Timer (White)
230 Volt (24x7) Digital Programmable Timer Electronic Timer Energy Saving Socket Type Digital Programmable Plastic Electronic Timer (White) (230 Volt (24x7) Digital Programmable Timer/Energy Saving Socket)
Note : Product image may be vary according to the brand
Product Description
Digital Programmable Timer for Charging
Widely used for intelligent control of lighting equipment, fish aquarium, street lamps, garden lights decorative lighting, hoarding lighting, glow sign board and outdoor lighting, neon signs, household electrical appliances etc. As per time of the day.
Product Installation
1. Press the program button and release. The first on setting can be made now.
2. Press week button to set the day or blocks of days. Set the time by pressing the hour button and then min button.
3. Press the prog button again to finish the first on setting and enter into the first off setting. By repeating 2 to make the first off setting.
4. Press the prog button again to finish the first off setting and enter into the 2 on setting. Repeat 2 and 3 to program remaining settings.
5. After completing setting, press the clock button and the timer is ready to operate.
Comfort Fitting in All Switches
Made for India and built for safety our timer switch comfortably fits in to the most commonly used plug points in Indian homes.
Features
- Current consumption without load: 0.015MA
- 16 Programmer with memory/ LOAD CAPACITY: 1000 Watt (i. E Any general appliance)/ As per INDIAN STANDARD PLUG SOCKET
- POWER TYPE: AC 220-240 V 50/60 HZ (Indian standard power supply)
Note : Product image may be vary according to the brand
Package Includes:
Digital Programmable Timer | Electronic Timer Energy Saving Socket Type | Digital Programmable Plastic Electronic Timer (White)
28 Pin Narrow DIP IC Socket Base Adaptor (28 Pin Narrow DIP IC Socket Base Adaptor)
28 Pin Narrow DIP IC Socket Base Adaptor (Pack of 5)
24 Pin Narrow DIP IC Socket Base Adaptor (24 Pin Narrow DIP IC Socket Base Adaptor)
24 Pin Narrow DIP IC Socket Base Adaptor (Pack of 5)
16 Pin DIP IC Socket Base Adaptor (16 Pin DIP IC Socket Base Adaptor)
16 Pin DIP IC Socket Base Adaptor (Pack of 5)
USB 3.1 Female Socket Type C Connector 24 Pins Breakout PCB Board
High efficiency up to 90%. 5-40V adjustable input voltage range. With over-current and over-temperature protection, safe for use. It uses high performance fixed frequency current control mode controller as the core. Suitable for Battery chargers, home automation, and other high voltage electrical equipment.
LoRa SX1278 433M 10KM Wireless Spread Spectrum Transmission Module Ra-02 SX1278 Socket IOT (LoRa SX1278 Wireless Spread Spectrum Transmission Module)
Product Description :
Ra-02 is based on sx1278 wireless transparent transmission module (transceiver one), socket it can connect external antenna. Using advanced LoRa spread spectrum technology, communication distance is10000 meters, super error correction, anti-interference ability, with the air wake-up function (ultra-low power consumption). It can be used in the environment with thousands of people, especially for meter reading, smart home, burglar alarm and other equipment. Lora spread spectrum modulation technology 20dbm-100mw constant rf power output when voltage changes high sensitivity: Low to -148dbm half-duplex SPI communication programmable bit rates up to 300kbps supports FSK, GFSK, MSK, GMSK, LoRa and OOK modulation modes 127db RSSI dynamic range automatic rf signal detection, cad mode and ultra-high-speed AFC with CRC, up to 256 bytes of packet engine small volume dual-row stamp-hole patch package with shielding shell spring antenna (ra-01) external antenna (ra-02).
Ra-02 is based on sx1278 wireless transparent transmission module (transceiver one), socket it can connect external antenna. Using advanced LoRa spread spectrum technology, communication distance is10000 meters, super error correction, anti-interference ability, with the air wake-up function (ultra-low power consumption). It can be used in the environment with thousands of people, especially for meter reading, smart home, burglar alarm and other equipment. Lora spread spectrum modulation technology 20dbm-100mw constant rf power output when voltage changes high sensitivity: Low to -148dbm half-duplex SPI communication programmable bit rates up to 300kbps supports FSK, GFSK, MSK, GMSK, LoRa and OOK modulation modes 127db RSSI dynamic range automatic rf signal detection, cad mode and ultra-high-speed AFC with CRC, up to 256 bytes of packet engine small volume dual-row stamp-hole patch package with shielding shell spring antenna (ra-01) external antenna (ra-02).
SX1278 LoRa Module 433M 433MHz 10KM Ra-02 Ai-Thinker Wireless Spread Spectrum Transmission Socket for Smart Home (SX1278 LoRa Module-Wireless Spread Spectrum Transmission Socket)
Product Description :
The SX1276/77/78/79 transceivers feature the LoRa long range modem that provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. As the SX127x chips needs a few additional components for operation, the Ra-02 module developed by A.I. Thinker includes an SX1278 and everything needed for it to work in a small form factor PCB. This breakout board facilitates developing/prototyping with the Ra-02 module tremendously. Solder the pins, plug it into a microcontroller/SoC using dupont wires or a solderless breadboard, and use it to create LoRa projects! Features: Wireless Standard: 433MHz Frequency range: 420~450MHz 20dBm@10mW. Stable RF output power when input voltage changed Half-duplex SPI communication Programmable bit rate can reach to 300kbps 127dB RSSI wave range Radio: Semtech SX1278 Antenna connector: IPX (U.FL) Operating Voltage: 1.8~3.7VDC, default 3.3V Working Current: Rx <10.8mA (Lna Boost closed, Band 1) Tx <120mA ( 20dBm); sleep mode: 0.2uA
The SX1276/77/78/79 transceivers feature the LoRa long range modem that provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. As the SX127x chips needs a few additional components for operation, the Ra-02 module developed by A.I. Thinker includes an SX1278 and everything needed for it to work in a small form factor PCB. This breakout board facilitates developing/prototyping with the Ra-02 module tremendously. Solder the pins, plug it into a microcontroller/SoC using dupont wires or a solderless breadboard, and use it to create LoRa projects! Features: Wireless Standard: 433MHz Frequency range: 420~450MHz 20dBm@10mW. Stable RF output power when input voltage changed Half-duplex SPI communication Programmable bit rate can reach to 300kbps 127dB RSSI wave range Radio: Semtech SX1278 Antenna connector: IPX (U.FL) Operating Voltage: 1.8~3.7VDC, default 3.3V Working Current: Rx <10.8mA (Lna Boost closed, Band 1) Tx <120mA ( 20dBm); sleep mode: 0.2uA
- Packet radio with ready-to-go compatible with Arduino libraries
- Maximum output power: 20dBm; max. distance: 10km; high sensitivity: –139dBm
- Breakout board for SX1278 LoRa-based module Ra-02 with SPI interface
- <100mW ultra-small size, widely used in AMR, remote industrial control filed
- Dimension: Length-28mm, Width-20mm, Height-5mm, Weight-7gm
Weigand AR031 SD Card Module Slot Socket Reader
SD Card Reading Writing Module for Arduino with the on-board 3.3V regulator. This SD Card module can make your SD application easier and simple. Through programming, you can read and write to the SD card using your Arduino. With the help of this module, can use for SD Card more easily, such as for MP3 Player, MCU/ARM system control. It can be easily interfaced as a peripheral to your Arduino, and other embedded boards and micro-controllers. Through programming, you can read and write to the SD card over the SPI interface.
- 1