Displays
We are now carrying the LCD Keypad shield. Suitable for Arduino main board which include the Arduino Uno and Arduino Leonardo. The Cytron LCD keypad Shield is sometimes called navigation shield because it comes with 6 momentary push buttons for menu navigation. Besides the push button, it also includes a 2×16 LCD.
This is a very popular LCD Keypad shield for Arduino and other variants. It includes a 2×16 LCD display and 6 momentary push buttons. Pins 4, 5, 6, 7, 8, 9 and 10 are used to interface with the LCD. The onboard LED indicates power on.
Note: You need to turn the on-board Potentiometer (blue color) to adjust screen contrast.
Features :
- The LCD Keypad shield is developed for Arduino compatible boards, to provide a user-friendly interface that allows users to go through the menu, make selections etc.
- It consists of a 1602 white character blue backlight LCD.
- The keypad consists of 6 keys select, up, right, down, left and reset.
- To save the digital IO pins, the keypad interface only uses one ADC channel.
- The key value is read out through a 5 stage voltage divider.
Package Includes:
1 x Cytron LCD keypad Shield High Quality
2.4″ Inch Touch Screen TFT Display Shield adds a touch up to your Arduino project with a beautiful large touchscreen display shield with built-in microSD card connection. This TFT display is big (2.4″ diagonal) bright and colorful! 240×320 pixels with individual pixel control. It has way more resolution than a black and white 128×64 display.
Features :
- 2.4″ diagonal Touch LCD TFT display
- 240×320 resolution, 18-bit (262,000) color
- 8-bit digital interface, plus 4 control lines
- 5V compatible! Use with 3.3V or 5V logic
- Onboard 3.3V 300mA LDO regulator
- Uses digital pins 5-13 and analog 0-3. That means you can use digital pins 2, 3, and analog 4 and 5. Pin 12 is available if not using the microSD
- Works with any Arduino Uno and mega compatible boards
Package Includes:
1 x 2.4″ Inch Touch Screen TFT Display Shield for Arduino UNO Mega
1 x Stylus Pen
Seven segment displays are used in many days today’s consumer devices like microwave ovens, washing machines, and air conditioners. They are a simple but effective way to display numerical data like time or quantity. Since they are made out of LEDs, they are a low-cost option for displaying information. They are widely appreciated for its features like accuracy, clarity and optimum functionality.
Features :
- Bright Red LED chip, which is made from AlGaAs on GaAs substrate
- Blackface and RED LED segments
- Type: Common cathode
- Low Current Consumption
- High Brightness
- Easy to Use with PCB Mounting as well as on Breadboard
This is an LCD 20 x 4 Parallel LCD Display that provides a simple and cost-effective solution for adding a 20 x 4 white on RGB Liquid Crystal Display into your project. The display is 20 character by 4 line display that has a very clear and high contrast white text upon a blue background/backlight.
This is the great blue backlight LCD display. It is fantastic for Arduino-based projects. This LCD 20 x 4 Parallel LCD Display with Blue Backlight is very easy to interface with Arduino or Other Microcontrollers.
The values shown on the display can be either simple text or numerical values read by the sensors, such as temperature or pressure, or even the number of cycles that the Arduino is performing.
Features :
- 20 characters wide, 4 rows
- White text on the Blue background
- Single LED backlight included can be dimmed easily with a resistor or PWM.
- Can be fully controlled with only 6 digital lines! (Any analog/digital pins can be used)
Package Includes :
1 x 20×4 Character LCD Display With Blue Backlight
This is an LCD 20 x 2 Parallel LCD Display that provides a simple and cost-effective solution for adding a 20 x 2 Black on RGB Liquid Crystal Display into your project. The display is 20 character by 2 line display that has a very clear and high contrast black text upon a yellow background/backlight.
This is the great yellow backlight LCD display. It is fantastic for Arduino-based projects. This LCD 20 x 2 Parallel LCD Display with yellow Backlight is very easy to interface with Arduino or Other Microcontrollers.
The values shown on the display can be either simple text or numerical values read by the sensors, such as temperature or pressure, or even the number of cycles that the Arduino is performing.
Features :
- 20 characters wide, 2 rows
- Black text on the Yellow background
- Single LED backlight included can be dimmed easily with a resistor or PWM.
- Can be fully controlled with only 6 digital lines! (Any analog/digital pins can be used)
Package Includes :
1 x 20×2 Character LCD Display With Yellow Backlight
- 1