Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
12V Warm White 5050 SMD LED Strip- 5Meter (12V Warm White 5050 SMD LED Strip)
This Bright 12V Warm White 5050 SMD LED Strip has high intensity and reliability. It has a significantly longer life span of around 50,000 hours than ordinary LED strips available in the market and therefore it can be used for application where long-life performance required.
This 5 meter LED strip with around 300 LEDs on strip operates at 12V at 2A DC supply. The Strip has soldered endpoints from both ends to connect strip conveniently.
The flexible ribbon is very easy for curving around bends and for completely smooth and even light spread, solving the uneven luminous problem. This LED strip has the advantage of Ultra-bright but running at low-temperature low power consumption. The strip comes with 5M self-adhesive to easy install.
Application:
  • Ideal for decoration of building outlines, landscape illumination, amusement themes,
  • Holiday light sculpture, decorative figure, active signs, displays, shop windows
  • And storefronts, bar, nightclub, street, sidewalk, deck, park, porch, staircase, railing, ceiling, or driveway.

 

Note: LEDs Driver or Adapter is not included in the package, you have to buy it separately

Features :

  • Bright 5050 SMD LED, high intensity and reliability.
  • Long life span 50,000 hours
  • Soldered by pieces, packed with 5 meters.
  • Flexible ribbon for curving around bends
  • Completely smooth and even light spread, solving the uneven luminous problem
  • Ultra-bright but running at low temperature
  • Low power consumption
600₹  Inc Tax
12V RGB 5050 SMD LED Strip- 5Meter (12V RGB 5050 SMD LED Strip)

12V RGB 5050 SMD LED Strip with 5Meter length has 300 Bright, RGB LEDs on the single strip!  The strip is comprised of 5050 Sized SMD RGB LEDs and draws a total of 22.5 Watts of Power. This RGB 5050 SMD LED Strip strip is flexible and can be bent to conform to curves and corners. Runs from 12VDC. (Power supply and controller not included) You need a minimum output 2 AMPs Adapter to power this full 5 Meter strip. Using an underpowered power supply on these strips will result in power loss down the line and mismatched colors due to a certain color of diodes not receiving enough power.

These strips are a bit different because, though they have the same number of LED modules (300) in another Cold white or Warm White roll, they actually have three times the light-emitting diodes as a regular LED strips. This is because each of the 300 modules on the strip each contains three colors. A red, a blue, and green LED. This means that, when set to white, at full brightness, the RGB strips use almost three times the power as the regular white strips. A 5 Meter roll of RGB LEDs uses roughly 2.8 Amps at 12VDC. So connecting three of these strips, end-to-end would result in roughly an 8.4 Amp requirement.

We also carry 44 Keys RGB IR Remote Controller for 12V 5050 RGB LED Strip

Note: These are NOT individually addressable LED strips. Each color has its own separate 12VDC circuit. For a total of three 12VDC circuits (R G B). You can power these strips off of regular 12V DC if you don’t need advanced flashing patterns or color mixing.


Features :

  • With the controller can make various colours and change Blinking patterns
  • Such as horse race, raindrop, color scan, trail and jump etc
  • Flexible can be bent to any shape
  • LED quantity and length can be made customizable
  • High brightness and long life (over 40,000hrs)
  • Low voltage, safe for use
700₹  Inc Tax
12V 5050 RGB LED Strip Controller box with 24 Key IR Remote Control (12V RGB LED Strip Controller box with 24 Key IR Remote Control)

This controller box operates on 12Volt DC supply via onboard 5mm female DC port. At the other end, it has 4 Pin Output female connector which can be connected to RGB strip directly. Also, the controller box has an IR receiver with a flexible probe to set it according to the requirement or to hide the controller in systematic decorations.

The controller box can operate at up to 6A current which means you can run 5 meters RGB Strip easily on this controller. IR remote control comes with 42 key with various keys for the differential pattern of RGB functions, Brightness Adjustments, Blink frequency Adjustment well as ON and OFF button

Button use:
R: Color change to Red
G: Color change to Green
B: Color change to Blue
W: Color change to White

Use: 12V 5050 RGB SMD LED strip lights

Note: Length of Strip depends upon the adapter you use to power the box. For 1-meter strip, 12V 2A power supply is needed


Features :

  • Plug and Play Easy to connect
  • Flexible IR Receiver Probe
  • Multi-Function IR Remote control
  • 16 colors, 5 light pattern: Static/Flash/Strobe/Fade-change/RGB Smooth-change.
  • 16-classes Static Mode Dim Control
  • 16-Speeds Control in Flash / Strobe / Fade-change / RGB Smooth-change.
  • Connecting mode: common anode
  • Material: plastic
  • Output: Three CMOS Drain-open Output
250₹  Inc Tax
Per Page      1 - 3 of 3
  • 1