Search
Search Criteria
Products meeting the search criteria
It is a BO Series 110RPM DC Motor Plastic Gear Motor. The BO series straight motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors.
A Small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & light weight makes it suitable for in-circuit placement. This motor can be used with 69mm Diameter Wheel for Plastic Gear Motors and 87mm Diameter Multipurpose Wheel for Plastic Gear Motors.
Low-cost geared DC Motor. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-12V and is perfect for building small and medium robots. Available with 60 and 150 RPM.
The motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car. They are commonly used in our 2WD platforms.
Features:
- Cost-effectiveness of the injection-molding process
- Elimination of machining operations
- Low density: lightweight, low inertia
- Uniformity of parts
- Capability to absorb shock and vibration as a result of elastic compliance
- Ability to operate with minimum or no lubrication, due to inherent lubricity
- The relatively low coefficient of friction
- Corrosion-resistance; elimination of plating, or protective coatings
- The quietness of operation
- Tolerances often less critical than for metal gears, due in part to their greater resilience
- Consistency with the trend to greater use of plastic housings and other components
Package Includes:
1 x 110 RPM Half Metal Gear BO Motor – Straight
This is a TT DC Gearbox Motor with a gear ratio of 1:48, and it comes with 2 x 200mm 28AWG wires with breadboard-friendly 2.54mm(0.1”) Female connectors. DC geared motor with high-quality rubber wheels, dual shafts can be equipped with speed measurement code disk, convenient for speed measurement
A Small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & light weight makes it suitable for in-circuit placement. This motor can be used with 69mm Diameter Wheel for Plastic Gear Motors and 87mm Diameter Multipurpose Wheel for Plastic Gear Motors.
Low-cost geared DC Motor. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-12V and is perfect for building small and medium robots. Available with 60 and 150 RPM.
The motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car. They are commonly used in our 2WD platforms.
Note: These Motors are available in three different colors i.e. Yellow, Black, and white, we will ship it randomly.
Features:
- Cost-effectiveness of the injection-molding process
- Elimination of machining operations
- Low density: lightweight, low inertia
- Uniformity of parts
- Capability to absorb shock and vibration as a result of elastic compliance
- Ability to operate with minimum or no lubrication, due to inherent lubricity
- The relatively low coefficient of friction
- Corrosion-resistance; elimination of plating, or protective coatings
- The quietness of operation
- Tolerances often less critical than for metal gears, due in part to their greater resilience
- Consistency with the trend to greater use of plastic housings and other components
Package Includes:
1 x 5V 200RPM Microbit TT DC Motor
The 100 RPM L-Shape BO Motor Plastic Gear Motor – BO series straight motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors.
Small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & light weight makes it suitable for in-circuit placement. This motor can be used with 69mm Diameter Wheel for Plastic Gear Motors and 87mm Diameter Multipurpose Wheel for Plastic Gear Motors.
Low-cost geared DC Motor. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-12V and is perfect for building small and medium robots. Available with 60 and 150 RPM.
The motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car. They are commonly used in our 2WD platforms.
Note: These Motors are available in three different colors i.e. Yellow, Black, and white, we will ship it randomly.
Features:
- Cost-effectiveness of the injection-molding process
- Elimination of machining operations
- Low density: lightweight, low inertia
- Uniformity of parts
- Capability to absorb shock and vibration as a result of elastic compliance
- Ability to operate with minimum or no lubrication, due to inherent lubricity
- The relatively low coefficient of friction
- Corrosion-resistance; elimination of plating, or protective coatings
- The quietness of operation
- Tolerances often less critical than for metal gears, due in part to their greater resilience
- Consistency with the trend to greater use of plastic housings and other components
Package Includes:
1 x 100 RPM L-Shape BO Motor – Straight
The 300 RPM L-Shape BO Motor Plastic Gear Motor – BO series straight motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors.
Small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & light weight makes it suitable for in-circuit placement. This motor can be used with 69mm Diameter Wheel for Plastic Gear Motors and 87mm Diameter Multipurpose Wheel for Plastic Gear Motors.
Low-cost geared DC Motor. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-12V and is perfect for building small and medium robots. Available with 60 and 150 RPM.
The motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car. They are commonly used in our 2WD platforms.
Note: These Motors are available in three different colors i.e. Yellow, Black, and white, we will ship it randomly.
Features:
- Cost-effectiveness of the injection-molding process
- Elimination of machining operations
- Low density: lightweight, low inertia
- Uniformity of parts
- Capability to absorb shock and vibration as a result of elastic compliance
- Ability to operate with minimum or no lubrication, due to inherent lubricity
- The relatively low coefficient of friction
- Corrosion-resistance; elimination of plating, or protective coatings
- The quietness of operation
- Tolerances often less critical than for metal gears, due in part to their greater resilience
- Consistency with the trend to greater use of plastic housings and other components
Package Includes:
1 x 300 RPM L-Shape BO Motor – Straight
The 100 RPM Dual Shaft BO Motor Plastic Gear Motor – BO series straight motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors.
Small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & light weight makes it suitable for in-circuit placement. This motor can be used with 69mm Diameter Wheel for Plastic Gear Motors and 87mm Diameter Multipurpose Wheel for Plastic Gear Motors.
Low-cost geared DC Motor. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-12V and is perfect for building small and medium robots. Available with 60 and 150 RPM.
The 300 RPM Dual Shaft BO Motor-Straight is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car. They are commonly used in our 2WD platforms.
Note: These Motors are available in three different colors i.e. Yellow, Black, and white, we will ship it randomly.
Features:
- Cost-effectiveness of the injection-molding process
- Elimination of machining operations
- Low density: lightweight, low inertia
- Uniformity of parts
- Capability to absorb shock and vibration as a result of elastic compliance
- Ability to operate with minimum or no lubrication, due to inherent lubricity
- The relatively low coefficient of friction
- Corrosion-resistance; elimination of plating, or protective coatings
- The quietness of operation
- Tolerances often less critical than for metal gears, due in part to their greater resilience
- Consistency with the trend to greater use of plastic housings and other components
Package Includes:
1 x 100 RPM Dual Shaft BO Motor – Straight
It is a BO Series 1 100RPM DC Motor Plastic Gear Motor. The BO series straight motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors.
A Small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & light weight makes it suitable for in-circuit placement. This motor can be used with 69mm Diameter Wheel for Plastic Gear Motors and 87mm Diameter Multipurpose Wheel for Plastic Gear Motors.
Low-cost geared DC Motor. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-12V and is perfect for building small and medium robots. Available with 60 and 150 RPM.
The motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car. They are commonly used in our 2WD platforms.
Note: These Motors are available in three different colors i.e. Yellow, Black, and white, we will ship it randomly.
Features:
- Cost-effectiveness of the injection-molding process
- Elimination of machining operations
- Low density: lightweight, low inertia
- Uniformity of parts
- Capability to absorb shock and vibration as a result of elastic compliance
- Ability to operate with minimum or no lubrication, due to inherent lubricity
- The relatively low coefficient of friction
- Corrosion-resistance; elimination of plating, or protective coatings
- The quietness of operation
- Tolerances often less critical than for metal gears, due in part to their greater resilience
- Consistency with the trend to greater use of plastic housings and other components
Package Includes:
1 x 100 RPM BO Motor – Straight
The 300 RPM Dual Shaft BO Motor Plastic Gear Motor – BO series straight motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors.
Small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & light weight makes it suitable for in-circuit placement. This motor can be used with 69mm Diameter Wheel for Plastic Gear Motors and 87mm Diameter Multipurpose Wheel for Plastic Gear Motors.
Low-cost geared DC Motor. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-12V and is perfect for building small and medium robots. Available with 60 and 150 RPM.
The 300 RPM Dual Shaft BO Motor-Straight is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car. They are commonly used in our 2WD platforms.
Note: These Motors are available in three different colors i.e. Yellow, Black, and white, we will ship it randomly.
Features:
- Cost-effectiveness of the injection-molding process
- Elimination of machining operations
- Low density: lightweight, low inertia
- Uniformity of parts
- Capability to absorb shock and vibration as a result of elastic compliance
- Ability to operate with minimum or no lubrication, due to inherent lubricity
- The relatively low coefficient of friction
- Corrosion-resistance; elimination of plating, or protective coatings
- The quietness of operation
- Tolerances often less critical than for metal gears, due in part to their greater resilience
- Consistency with the trend to greater use of plastic housings and other components
Package Includes:
1 x 300 RPM Dual Shaft BO Motor – Straight
The 300 RPM BO Motor Plastic Gear Motor – BO series straight motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors.
Small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & light weight makes it suitable for in-circuit placement. This motor can be used with 69mm Diameter Wheel for Plastic Gear Motors and 87mm Diameter Multipurpose Wheel for Plastic Gear Motors.
Low-cost geared DC Motor. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-12V and is perfect for building small and medium robots. Available with 60 and 150 RPM.
The motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car. They are commonly used in our 2WD platforms.
Note: These Motors are available in three different colors i.e. Yellow, Black, and white, we will ship it randomly.
Features:
- Cost-effectiveness of the injection-molding process
- Elimination of machining operations
- Low density: lightweight, low inertia
- Uniformity of parts
- Capability to absorb shock and vibration as a result of elastic compliance
- Ability to operate with minimum or no lubrication, due to inherent lubricity
- The relatively low coefficient of friction
- Corrosion-resistance; elimination of plating, or protective coatings
- The quietness of operation
- Tolerances often less critical than for metal gears, due in part to their greater resilience
- Consistency with the trend to greater use of plastic housings and other components
Package Includes:
1 x 300 RPM BO Motor – Straight
4WD Suspension Smart Car Chassis with 125 RPM BO Motors Kit is best for beginners as well as regular users. This is very creative designed look like any NASA project bot. The Kit is easy to use as it has all the mounting hole and assembly. This smart car chassis come with battery holder for providing power to bo motor. It has an exact same size mounting hole for Arduino and Raspberry Pi and Motor drivers.
Additionally this Kit comes with all essentials accessories like Spacers, Nut & Bolt set, Wires for connecting motors, 4 x AA battery holder to provides 6v DC power to bot. and the 2 in 1 screwdriver.
Features:
- Very Easy to Assemble
- High Quality Laser Cutted Acrylic Plates
- Precised Nut-bolts and Spacers
- High Quality Wheels and 125RPM BO Motors with Dual Straight Shaft
Package Includes:
4 x 125RPM BO Motors with Dual Straight Shaft
4 x 65 x 25 mm Diameter Plastic Wheel with Rubber Grip (Yellow)
4 x 220 mm Long Fins for motor holding
2 x 160 x 160mm 3mm thick Acrylic Base plates (Black)
1 x 4*AA battery holder
1 x Wires, Spacers, and nut-bolt set
The 100 RPM Single Shaft L- Shaped BO Motor motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors.
Small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & light weight makes it suitable for in-circuit placement. This motor can be used with 69mm Diameter Wheel for Plastic Gear Motors.
It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-12V and is perfect for building small and medium robots.
The motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car. They are commonly used in our 2WD platforms.
Product Details:
Minimum Order Quantity | 2 Piece |
Phase | Three Phase |
Motor Voltage | 3 V - 12 V DC |
Motor Brand | RS |
No Load Current | 40 - 80mA |
We offer our customers an excellent quality Dual Shaft DC BO Motor. Low-cost high-performance DC geared motor with a wide operating voltage range of 3~12 volts DC and good output torque capability.
- 1