Search

Most Waterproof Ultrasonic Sensor Module aren’t waterproof which can be a problem if you need your project to withstand the elements outdoors. No need to worry anymore! We have developed waterproof & ultrasonic distance sensors with a waterproof sealed emitter. This sensor is suitable for outdoor applications such as car reversing sensors, security alarms, industrial inspection, etc.

This module is easy to use. A control port sends a high level above 10US, so you can wait for the high-level output at the receiving port. You can turn on the timer when there is an output. When this port goes low, you can read it. The value of the timer, at this time, is the time of the distance measurement, in order to calculate the distance. Such continuous cycle measurement, that is, you can reach the value of your mobile measurement.

1. Horizontal ranging.
2. Obstacle avoidance, automatic control.
3. Objects are close, there is awareness.
4. Traffic control.
5. Security, industrial control.
6. Artificial intelligence, teaching, and research.

Features:

1. Small size and easy to use.
2. Low voltage and low power consumption.
3. High measurement accuracy.
4. Strong anti-interference.
5. Integrated enclosed waterproof line probe for wet and harsh measurement applications.

This is an Ultrasonic Sensor, Transceiver, 16 mm Diameter, 40 kHz, -74 dB, Plastic, Black, -30 degree C to 85 degrees C product from MULTICOMP pro with the model number MCUSD16P40B12RO

Features:

1. Open structure and dual-use
2.  Compact and lightweight
3.  High sensitivity and sound pressure
4.  Less power consumption
5. High reliability

Specifications:

1. Construction: Open struct
2. Using Method: Dual Use
3. Frequency: 40 ± 1kKz
4. Transmitting Sound Pressure Level: min. 112dB (30cm/10V rms Sine Wave)
5. Receive Sensitive: min-74dB/V/ μbar
6. -6dB Directivity: 50°
7. Aftershock Time: max. 1.5ms
8. Sensitivity Distance: 0.6m to 16m
9. Capacitance: 3,000pF 20% at1kHz
10. Soldering conditions: 350°C to 400°C
11. Operating Temperature. Range: -30°C to 85°C
12. Allowable Input Voltage: 120Vp-p (40kHz)
13. Housing Material: Plastic

UNIT SONIC IO is a GPIO interface ultrasonic range sensor. This module features an RCWL-9620 ultrasonic distance measurement chip with a 16mm probe, which the ranging accuracy can reach 2cm-450cm (accuracy up to ±2%). This sensor determines the distance to a target by measuring time lapses between the transmitting and receiving of the pulse signal, users can directly obtain the distance value through IO control mode. It is ideal to apply in robotics obstacle avoidance, fluid level detection, and other applications that require you to perform measurements.

Features:

1. RCWL-9620
2. GPIO communication interface
3. Measuring range: 2cm-450cm
4. Protective housing
5. Built-in temperature compensation reduces the temperature drift
6. Support UIFlow platform

Specifications:

1. Ultrasonic Ranging Single Chip: RCWL-9620
2. Range: 2cm-450cm
3. Probe Specifications: 16mm
4. Receiving/Transmitting Frequency: 40KHz
5. Receiving sensitivity: -65dB
6. Pointing angle: 60°
7. Measurement accuracy: ±2%
8. Measurement period: 50ms
9. Working current: 3mA

Features of the MB1001, ParkSonar-EZ-72, include one-inch resolution, both proximity and range information for the nearest detectable target, and various output options: high/low logic level and RS232 serial.

The ParkSonar‑EZ line is designed to detect vehicles within a calibrated detection zone. The ParkSonar-EZ proximity sensors report when a vehicle, or other detectable target, enters the detection zone. The target is released after leaving the ParkSonar-EZ’s detection zone.

The MB1001 has a detection zone of ~6 feet. The MB1001 will allow for 14 simultaneous sensors depending on sensor mounting and environment.

Applications: 

1. Vehicle Detection Sensor
2. Parked car detection
3. Proximity zone detection
4. Sheltered drive thru’s
5. Non-condensing environments only
6. Designed for protected indoor environments
7. Other weather resistant models available2

Features: 

1. Automatic multi-sensor operation
2. RoHS Compliant
3. Small, light weight module
4. Designed for easy integration into your project or product
5. Mounting holes provided on the circuit board (or can be grommet mounted)
6. Very low power proximity sensor, excellent for multiple sensor or battery based systems
7. Continuously gives output which frees up user processors
8. User can choose either of the two sensor outputs
9. Runs automatically or can be triggered externally
10. Fast measurement cycle

Specifications: 

1. Operates voltage: 2.5 and 5.5V
2. Current: 2.0mA
3. Resolution: 1 inch
4. Target acquire time: ~10 second
5. Target release time: ~5 second
6. Maximum reported range: 254 inches (645 cm)
7. Choice of 2 digital outputs: Logic Level (High/Low) and RS232 serial
8. Ultrasonic sensor measures distance to objects: 42kHz
9. Virtually no sensor dead zone: objects closer than 6 inches typically range as 6 inches
10. Proximity Detection zone: 6 feet (72 inches)

Buy this powerful DC 24V Ultrasonic Humidifier device suitable for atomization with a plate diameter of 10 mm.  It is mostly in demand for fish pot and decoration purposes in households. It’s a simple plug-and-play module in which you just have to deep down the module in water and Supply 24 volt DC supply directly from the battery or power supply Adapter and it will start working.

Additionally, this 24v 12 Colourful LED Ultrasonic Humidifier 12 LED Mist Maker Fogger comes with 12 Waterproof LED with 3 different colours glowing alternately which adds the colourful mist to your decoration

The fully waterproof module has a 5mm DC female jack to connect the 24V input power supply with a 1-meter long cable.

Instruction to use:

1. Deep the module in the water keeping 4 to 5 cm water level above the device
2. Connect the power supply of 24V DC 1AMP and enjoy the fog.
3. Use power supply at least with 1AMP output for best performance
4. Do not deep it in water more than 5cm for maximum fog output.

How does it work?

Ultrasonic Humidifier Piezoelectric Transmitter module works on the principle of cavitation produced by sound waves. Just provide the power supply it will turn into an altimate ultrasonic atomizer.

Features:

1. Huge amount of humidification
   • High-frequency vibration produces 350ml of mist per minute, humidifying all-day
2. Wide Application
   • Supporting use bonsai crafts, fish tank water tanks, DIY crafts and ect.
3. Self-contained water level sensor
   • Automatically power off with water shortage to prevent burning of the atomizer

This is an Arduino compatible piezo film vibration sensor. It is made up of flexible piezo film and converter board. The sensor is able to detect vibration, flexibility, impact and touch. The film is a flexible component comprising a 28 µm thick piezoelectric PVDF polymer film with screen-printed Ag-ink electrodes, laminated to a 0.125 mm polyester substrate, and fitted with two crimped contacts. As the piezo film is displaced from the mechanical neutral axis and bending creates very high strain within the piezo polymer, high voltages (about ±90V) are generated. When the assembly is deflected by direct contact, the device acts as a flexible “switch”, and the generated output is sufficient to trigger MOSFET or CMOS stages directly.

The module uses universal Gravity 3Pin interface that is easy to plug and play. It comes with Digital and Analog two output signals, which is  suitable for all kinds of different applications. The piezo vibration sensor is not only able to detect strong shocks, but also to detect slight vibrations. There is an on-board sensitivity adjustment potentiometer, you can adjust it to increase/decrease the output threshold value.

Meanwhile, the piezo film sensor has a wide dynamic range (0.001Hz~1000MHz) also guarantees an excellent measuring.

Applications:

1. Vibration Sensing in Washing Machine.
2. Low Power Wakeup Switch.
3.  Low Cost Vibration Sensing.
4. Car Alarms.
5. Body Movement.
6. Security Systems.

Features:

1. Both No Mass & With Mass Version.
2. Withstands High Impact.
3. Operating Temperature: 0ºC to 85ºC.
4. Storage Temperature: -40ºC to 85 ºC.
5. Higher Temperature Version up to 125 ºC available on a Custom Basis.

Specification:

1. Operating Voltage: 5V.
2. Interface Type: Gravity PH2.0 3Pin interface.
3. Operating Temperature: 0 ° C to 85 ° C.
4. Storage Temperature: -40 ° C to 85 ° C.
5. Dimension: 27mm * 22mm.
6. Weight: 10 g.

Features :

• Red LED checks the state of the proximity sensor
• High repeated positioning accuracy
• High switching frequency
• Wide voltage range
• Outer (Thread) Diameter: M12
• Antivibration, dust, water and oil prevention
• Reverse power protection, short circuit protection, directly connecting with PLC
• Can replace small switches and limit switches

Package Includes :

1 x DC 6-36V M17 Inductive 1 – 10mm PNP-NO Proximity Sensor Switch
1 x DC 6-36V M17 Inductive 8mm NPN-NO Proximity Sensor Switch

Features :

• Red LED checks the state of the proximity sensor
• High repeated positioning accuracy
• High switching frequency
• Wide voltage range
• Outer (Thread) Diameter: M12
• Antivibration, dust, water and oil prevention
• Reverse power protection, short circuit protection, directly connecting with PLC
• Can replace small switches and limit switches

Package Includes :

1 x DC 6-36V M12 Inductive 4mm NPN-NO Proximity Sensor Switch
1 x DC 6-36V M12 Inductive 4mm PNP-NO Proximity Sensor Switch

Features:

1. With the controller can make various colours and change Blinking patterns,
2. Such as horse race, raindrop, color scan, trail and jump etc.
3. Flexible can be bent to any shape.
4. LED quantity and length can be made customizable
5. High brightness and long life (over 40,000hrs)
6. Low voltage, safe for use

DFRobot Gravity Digital Adjustable Infrared Proximity Sensor. It has an adjustable detection range, 3cm – 80cm.  It is small, easy to use, assemble, and inexpensive.

Useful for robotics, interactive media, industrial assembly line, etc. The infrared wavelength is part of the Sun’s natural light spectrum. While is a nice fit for indoor projects, outdoors with plenty of sunlight and reflective surfaces on its sight is not advised. It’s incredibly repurposable and can be used for a lot of different projects. The adjustable screw on its back makes it very convenient for different purposes. After digital read shows on your Arduino pin and then you are ready to go. It is a great sensor choice for quick prototyping.

Use it on a robot for wall detection and wall follower, or as some of the projects listed below as a trigger system. Its round shape with the screwable holders makes it a good choice for a homemade assembled robot, with a hole of its diameter and the holders you can place it aiming at different positions on a robot. Or even place it near your PC to turn on and off your monitor.

To ease the difficulty,  a Gravity Interface is adapted to allow plug & play.  The IO expansion shield is the best match for this sound senor connecting to your Arduino.

Features :

• Red LED checks the state of the proximity sensor
• High repeated positioning accuracy
• High switching frequency
• Wide voltage range

DFrobot offers an advanced level of sensors at an affordable cost than any other competitor brand in the market, making them ideal for the one who wants to start some Projects through Different types of sensors.

After finding Different types of sensors on market, we at robu.in have determined that DFrobot is one of the good brands that offer a wide range of sensors at an Appropriate price.

This is an Arduino compatible sound level meter(also known as a decibel meter, noise meter). It uses an instrument circuit and low noise microphone, which enable it to accurately measure the sound level of the surrounding environment. It can be applied to environmental noise testing, such as highway noise monitoring stations, bedroom noise monitoring, etc.

Nowadays, there are many kinds of sounds surrounding, some of which are really noisy. It is really essential to measure whether the sound is noisy enough to do damage to our health.

The sound level meter (also known as the decibel meter, noise meter) is a basic noise measurement instrument. We have launched a sound level meter, which is compatible with Arduino, plug-and-play. It can accurately measure the sound level of the surrounding environment. This product uses an instrument circuit, low noise microphone, which makes it highly precise. It supports 3.3~5.0V wide input voltage, 0.6~2.6V voltage output. The decibel value is linear with the output voltage, which leads to a simple conversion, without a complex algorithm. The connector is plug-and-play, without welding, so this product can be easily used in your application.

The 103SR13A-1 is an unipolar hall-effect digital Position Sensor with 15/32-32 UNS-2A cylindrical aluminium threaded housing and 152mm (6-inch) 24-gauge stranded lead wires, irradiated polyethylene insulated termination. Meet NEMA 3, 3R, 3S, 4, 4X (stainless-steel housing), 12 and 13 requirements. They respond to the magnetic field from permanent magnets or electromagnets. This rugged non-contact sensing product use versatile, reliable Hall-effect sensor ICs that are operated by a magnetic field and are designed to respond to alternating North and South Poles or to South Pole only. The hall-effect position sensor includes latching and linear magnetic types. The standard open-collector sinking output (digital devices) or push-pull output (linear device) of the hall-effect position sensor can be easily interfaced with common electronic circuitry such as microprocessors, integrated logic, discrete transistors, and SCRs with compatible voltage specifications.