Search

Features :

• Red LED checks the state of the proximity sensor
• High repeated positioning accuracy
• High switching frequency
• Wide voltage range
• Outer (Thread) Diameter: M12
• Antivibration, dust, water and oil prevention
• Reverse power protection, short circuit protection, directly connecting with PLC
• Can replace small switches and limit switches

Package Includes :

1 x DC 6-36V M17 Inductive 1 – 10mm PNP-NO Proximity Sensor Switch
1 x DC 6-36V M17 Inductive 8mm NPN-NO Proximity Sensor Switch

Features :

• Red LED checks the state of the proximity sensor
• High repeated positioning accuracy
• High switching frequency
• Wide voltage range
• Outer (Thread) Diameter: M12
• Antivibration, dust, water and oil prevention
• Reverse power protection, short circuit protection, directly connecting with PLC
• Can replace small switches and limit switches

Package Includes :

1 x DC 6-36V M12 Inductive 4mm NPN-NO Proximity Sensor Switch
1 x DC 6-36V M12 Inductive 4mm PNP-NO Proximity Sensor Switch

Features:

1. With the controller can make various colours and change Blinking patterns,
2. Such as horse race, raindrop, color scan, trail and jump etc.
3. Flexible can be bent to any shape.
4. LED quantity and length can be made customizable
5. High brightness and long life (over 40,000hrs)
6. Low voltage, safe for use

DFRobot Gravity Digital Adjustable Infrared Proximity Sensor. It has an adjustable detection range, 3cm – 80cm.  It is small, easy to use, assemble, and inexpensive.

Useful for robotics, interactive media, industrial assembly line, etc. The infrared wavelength is part of the Sun’s natural light spectrum. While is a nice fit for indoor projects, outdoors with plenty of sunlight and reflective surfaces on its sight is not advised. It’s incredibly repurposable and can be used for a lot of different projects. The adjustable screw on its back makes it very convenient for different purposes. After digital read shows on your Arduino pin and then you are ready to go. It is a great sensor choice for quick prototyping.

Use it on a robot for wall detection and wall follower, or as some of the projects listed below as a trigger system. Its round shape with the screwable holders makes it a good choice for a homemade assembled robot, with a hole of its diameter and the holders you can place it aiming at different positions on a robot. Or even place it near your PC to turn on and off your monitor.

To ease the difficulty,  a Gravity Interface is adapted to allow plug & play.  The IO expansion shield is the best match for this sound senor connecting to your Arduino.

Features :

• Red LED checks the state of the proximity sensor
• High repeated positioning accuracy
• High switching frequency
• Wide voltage range

DFrobot offers an advanced level of sensors at an affordable cost than any other competitor brand in the market, making them ideal for the one who wants to start some Projects through Different types of sensors.

After finding Different types of sensors on market, we at robu.in have determined that DFrobot is one of the good brands that offer a wide range of sensors at an Appropriate price.

This is an Arduino compatible sound level meter(also known as a decibel meter, noise meter). It uses an instrument circuit and low noise microphone, which enable it to accurately measure the sound level of the surrounding environment. It can be applied to environmental noise testing, such as highway noise monitoring stations, bedroom noise monitoring, etc.

Nowadays, there are many kinds of sounds surrounding, some of which are really noisy. It is really essential to measure whether the sound is noisy enough to do damage to our health.

The sound level meter (also known as the decibel meter, noise meter) is a basic noise measurement instrument. We have launched a sound level meter, which is compatible with Arduino, plug-and-play. It can accurately measure the sound level of the surrounding environment. This product uses an instrument circuit, low noise microphone, which makes it highly precise. It supports 3.3~5.0V wide input voltage, 0.6~2.6V voltage output. The decibel value is linear with the output voltage, which leads to a simple conversion, without a complex algorithm. The connector is plug-and-play, without welding, so this product can be easily used in your application.

The 103SR13A-1 is an unipolar hall-effect digital Position Sensor with 15/32-32 UNS-2A cylindrical aluminium threaded housing and 152mm (6-inch) 24-gauge stranded lead wires, irradiated polyethylene insulated termination. Meet NEMA 3, 3R, 3S, 4, 4X (stainless-steel housing), 12 and 13 requirements. They respond to the magnetic field from permanent magnets or electromagnets. This rugged non-contact sensing product use versatile, reliable Hall-effect sensor ICs that are operated by a magnetic field and are designed to respond to alternating North and South Poles or to South Pole only. The hall-effect position sensor includes latching and linear magnetic types. The standard open-collector sinking output (digital devices) or push-pull output (linear device) of the hall-effect position sensor can be easily interfaced with common electronic circuitry such as microprocessors, integrated logic, discrete transistors, and SCRs with compatible voltage specifications.

This 37 in 1 Sensor Kit compatible with Arduino is supplied with a variety of sensors that are compatible with Arduino Boards. This is the most complete performance starter kit with all the essential Arduino sensors.

This kit contains excellent products that are compatible with Arduino. You can find the best sensors, whether you’re a beginner or an expert in this field, and use them to create the best DIY projects on your own. Prototyping will be easy and fun-loving with this Kit.

In this kit, you will get a variety of electronic components that can be used to construct or enhance your knowledge of many types of electronic components. Out of the box, the kit has a product’s 5V Channel Relay Module, a Temperature and humidity sensor module, etc.

Features :

• For beginners who are interested in Arduino
• A complete set of Arduino’s most common and useful electronic components
• The infrared sensor receiving module
• Laser sensor module
• Temperature and humidity sensor module
• Infrared sensor module
• 5v relay module
• Obstacle avoidance sensor module.

Package Includes :

• Module Introduction Paper- 1pc.
• Tutorial CD- 1pc.
• PS2 Game Joystick Module- 1pc.
• Infrared Sensor Receiving Module- 1pc.
• Laser Sensor Module- 1pc.
• Temperature and Humidity Sensor Module- 1pc.
• Infrared Sensor Module- 1pc.
• 5v Relay Module- 1pc.
• Obstacle Avoidance Sensor Module- 1pc.
• Finger Detecting Heartbeat Module- 1pc.
• Sound Sensor Module- 1pc.
• Metal Touch Sensor Module- 1pc.
• Flame Sensor Module- 1pc.
• 3 Color LED Module- 1pc.
• Line Sensor Module- 1pc.
• Linear Magnetic Hall Sensor- 1pc.
• Rotary Encoder Module- 1pc.
• Active Buzzer Module- 1pc.
• Magic Cup Light Module- 1pc.
• Small Passive Buzzer Module- 1pc.
• Digital Temperature Sensor Module- 1pc.
• Broken Light Module- 1pc.
• The Temperature Sensor Module- 1pc.
• Double Color LED Module- 1pc.
• Mercury Medallion Module- 1pc.
• Hall Magnetic Sensor Module- 1pc.
• 3 color LED Module- 1pc.
• Mini Reed Module- 1pc.
• Tilt Switch Module- 1pc.
• 7 color flashing LED module- 1pc.
• Button switch module- 1pc.
• Photosensitive resistance module- 1pc.
• Vibration switch module- 1pc.
• The knock sensor module- 1pc.
• The temperature sensor module- 1pc.
• Analogy hall magnetic sensors- 1pc.
• The microphone sound sensor module- 1pc.
• Big reed module Double color LED module- 1pc.