Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
Flame Sensor Infrared Receiver/Ignition Source Detection Module

The Flame Sensor is used for detecting fire without any fire protection for itself, please keep a distance from the fire to avoid damage. Sensitive to flame spectrum Features wide-range voltage comparator LM393 Adjustable sensitivity Signal output indicator

Application:

  1. Fire detection
  2. Fire fighting robot
  3. Fire alarm

Features: 

  1. Sensitive to flame spectrum
  2. Features wide-range voltage comparator LM393
  3. Adjustable sensitivity
  4. Signal output indicator

Package Includes:

1 x Flame Sensor

599₹  Inc Tax
I2C Ozone Sensor (0-10ppm) (Gas Sensor)

I2C Ozone Sensor (0-10ppm) is based on electrochemical principles and it can measure the ambient O3 concentration accurately and conveniently. With high anti-interference ability, high stability, and high sensitivity, this Arduino-compatible ozone sensor can be widely applied to fields like portable devices, air quality monitoring devices, disinfection cabinets, and smart homes.

This compact ozone sensor supports I2C output, it is compatible with many mainboards like Arduino Uno, esp32, Raspberry Pi, and so on. Its resolution can reach 10ppb. It supports a wide range of input voltage: 3.3V to 5.5V. Moreover, the lifetime is as long as 2 years. With a simple Gravity interface and practical sample code, you can build your own ozone concentration monitor easily and conveniently.

Precaution:

  1. Do not plug or unplug sensors on the module.
  2. It is forbidden to change or shift the installation state of electronic components. The module avoids contact with organic solvents (including silicone and other adhesives), coatings, pharmaceuticals, oils and high concentrations of gases.
  3. The module cannot be completely encapsulated with resin material, and it cannot be immersed in an oxygen-free environment, otherwise the performance of the sensor will be damaged.
  4. The module cannot be used in an environment containing corrosive gas for a long time. Corrosive gas will damage the sensor.
  5. The module must not be subjected to excessive shock or vibration.
  6. The module needs to be warmed up for about 24-48 hours after it is powered on for the first time. After the module is fully stable, it will be tested normally.
  7. The white waterproof and breathable membrane of the sensor on the module is strictly forbidden to open, otherwise it is regarded as artificial damage.
  8. Do not install the module in a strong convection air environment.
  9. Do not place the module in high-concentration organic gas for a long time. Long-term storage will cause the sensor zero point to drift and recover slowly.

Features:

  1. Measuring ozone concentration in the environment
  2. Supports Gravity 4-Pin Interface
  3. Accurate Digital Output

Specifications:

  1. Detection Gas: Ozone
  2. Working Voltage: 3.3 ~ 5.5V DC
  3. Interface: Gravity-4Pin
  4. Output Signal: I2C output
  5. Measuring Range: 0 ~ 10ppm
  6. Resolution: 0.01ppm (10ppb)
  7. Warm-up Time: ≤3 minutes
  8. Response Time: ≤90 seconds
  9. Recovery Time: ≤90 seconds
  10. Working Temperature: -20 ~ 50 ℃
  11. Operating Humidity: 15 ~ 95% RH (non-condensing)
  12. Storage Temperature: -20 ~ 50 ℃
  13. Life:> 2 years (in air)
  14. Dimension(L x W): 37mm * 27mm/1.06*1.46 inches
  15. Weight:0.022Kg
5,499₹  Inc Tax
CO2 Gas Sensor For Arduino (MG-811 Sensor) (Gas Sensor)

The greenhouse Effect” is melting the Earth’s ice core every minute and creating dangerous icebergs. By knowing the exact concentration of CO2(Carbon Dioxide), we can do something to reduce the CO2 and to protect our Earth. Here is the Arduino-based CO2 sensor designed by DFRobot’s lovely engineer. This is the first CO2 sensor in the Arduino market.  The output voltage of the module falls as the concentration of CO2 increases. The potentiometer onboard is designed to set the threshold of voltage. As long as the CO2 concentration is high enough (the voltage is lower than the threshold),  a digital signal (ON/OFF) will be released.

It has an MG-811 sensor module which is highly sensitive to CO2 and less sensitive to alcohol and CO, low humidity & temperature dependency.  The onboard heating circuit brings the best temperature for the sensor to function. Internal power boosting to 6V for heating sensor best performance. This sensor has an onboard conditioning circuit for amplifying the output signal.


Features:

  1. Good sensitivity and selectivity to CO2
  2. Low humidity and temperature dependency
  3. Long stability and reproducibility

Specifications:

  1. Heating Voltage: 6.0±0.1 V
  2. Heating Resistor: 30.0±5%Ω
  3. Heating Current: at 200mA
  4. Heating Power: 1200mW
  5. Operating Temperature: 20-50
  6. Size:32x42mm (1.26×1.65″)

Package Includes:

1 x DFRobot Gravity Analog CO2 Gas Sensor For Arduino (MG-811 Sensor)

999₹  Inc Tax
Gravity Analog Alcohol Sensor (MQ3) For Arduino (Gas Sensor)

The analog gas sensor – MQ3 is used in gas leakage detecting equipment in consumer and industry markets, this sensor is suitable for detecting LPG i-butane, propane, methane, alcohol, hydrogen, smoke. It has a high sensitivity and fast response time. And the sensitivity can be adjusted by the potentiometer


Features:

  1. Wide detecting scope
  2. Fast response and High sensitivity
  3. Stable and long life
  4. Simple drive circuit

Specification:

  1. Power supply needs: 5V
  2. Interface type: Analog
  3. Wide detecting scope
  4. Fast response and High sensitivity
  5. Simple drive circuit
  6. Stable and long life
  7. Size: 36.4×26.6mm

Packages Includes:

1 x DFRobot Gravity Analog Alcohol Sensor (MQ3) For Arduino

999₹  Inc Tax
MEMS Gas Sensor – MiCS-2714 (Breakout) (Gas Sensor)

The sensor uses MEMS technology to support gas concentration detection of NO, NO2 and H2. Matching sample code integrates the concentration conversion formula of various gas to facilitate the testing and use of sensors. The product supports a 5V power supply, analog voltage output, and has power supply enable/disable pins for low power consumption.

Application:
  1. Gas leak detection
  2. Gas safety equipment
  3. Air environment detection

Features:

  1. Integrates the concentration conversion formula
  2. Low power consumption.

Specifications:

  1. Detection of Physical Quantities: Gas concentration or gas leakage of NO, NO2, H2
  2. Operating voltage: 4.9~5.1V DC
  3. Power dissipation: 0.45W
  4. Output signal: Analog quantity
  5. Measuring range:1 – 1000ppm(Hydrogen H2) ,0.05 – 10ppm(Nitrogen dioxide NO2 )
  6. Working temperature: -30~85℃
  7. Working humidity: 5~95%RH (No condensation)
  8. Storage temperature: -40~85℃
  9. Lifespan: >2 years(in the air)
  10. Circuit board size:12mm×16mm
  11. Mounting hole size: Inner diameter 2mm/outer diameter 4mm

1,300₹  Inc Tax
Air Quality Monitor (PM 2.5, Formaldehyde, Temperature & Humidity Sensor) (Gas Sensor)

Healthy living starts with healthy air! As the most basic part of life, air is attracting more and more attention these years, for example, PM2.5, smog, etc. Keeping an eye on the quality of the air we breathe is becoming quite important.

This Air Quality Monitor introduced by DFRobot provides you with the measurements of PM10, PM2.5, and PM1.0 as well as temperature and humidity. It works well with devices like Arduino, STM32.Based on the principle of laser scattering, this sensor continuously collects and calculates the number of suspended particles of various sizes in the air per unit volume, which is particle concentration distribution, and then converts to mass concentration. At the same time, a temperature & humidity integrated sensing chip is embedded in the module for accurately detecting the temperature and humidity.

In a word, this air quality sensor combines the particle concentration value, temperature, and humidity monitoring functions onto one module, and outputs the relevant data frames via UART. It can be embedded in various instruments and equipment related to air quality monitoring and environmental air improvement to provide timely and accurate environmental parameters.


Features:

  1. Laser scattering principle, accurate measurement
  2. Zero false alarm rate
  3. Real-time response and support continuous acquisition
  4. Minimum recognizable particle size 0.3μm
  5. Brand-new patented structure, six-sided all-around shielding, stronger anti-interference performance
  6. The direction of the air inlet and outlet is optional, and wider application ranges
  7. Real-time output temperature and humidity data

Package Includes:

1 x DFRobot Air Quality Monitor (PM 2.5, Formaldehyde, Temperature & Humidity Sensor)

4,700₹  Inc Tax
AO-09 Oxygen sensor (Gas Sensor)

AO-09 is the oxygen sensor of Aosong Electronics. Offering long life and fast response, the high-quality AO-09 replacement sensor incorporates a molded body design, specific for medical use. Best of all, the AO-09 costs less than the sensors it replaces, creating additional saving while providing superior quality.

Applications: 

AO-09 Medical Oxygen Sensors are intended as an oxygen-sensing component of an oxygen analyzer that measures oxygen concentration in breathing gas mixtures in the following applications:

  1. Sensing device for oxygen
  2. Control device of oxygen concentrators
  3. Medical ventilators
  4. Anaesthesia equipment
  5. Incubators

Features: 

  1. Meets ISO 80601-2-55
  2. Linear output from 0% to 100%
  3. No external power supply
  4. Temperature compensation
  5. Excellent signal stability
  6. Accurate and reliable
  7. Fast response
  8. Anti-interference
  9. Long lasting

Specifications: 

  1. Operating Principle: Partial pressure electrochemical
  2. Output: 9 mV to 13 mV in 210 mBar O2
  3. Measurement Range: 0 – 100 Vol.% O2
  4. Response Time: (T 90 ) <15 s
  5. Baseline Offset: <200μV
  6. Accuracy: meets ISO 80601-2-55 requirements
  7. Cross interference: meets ISO 80601-2-55 requirements

ELECTRICAL:

  1. Temperature Compensation <2% O2 equivalent(0℃-40℃)
  2. External Load Resistor ≥ 10 kΩ
  3. Connector 3P2.5
  4. MECHANICAL
  5. Housing Material White ABS
  6. Weight 36 g (nominal)
  7. Orientation Any
  8. Influence of Mechanical Shock < 1 % relative after a fall from 1 m

ENVIRONMENTAL:

  1. Typical Applications: Critical care anesthesia
  2. Operating Temperature Range: 0℃ ~ 50℃
  3. Operating Pressure Range: 0.5 Bar – 2.0 Bar
  4. Operating Humidity Range: 0% to 99% RH noncondensing

Packages Includes: 

1 x AO-09 Oxygen sensor

2,700₹  Inc Tax
SGX MICS-VZ-89TE.INTEGRATED SENSOR BOARD, 3.3VDC, 0.125W (Gas Sensor)

The MiCS-VZ-89TE combines state-of-the-art MOS sensor technology with intelligent detection algorithms to monitor tVOCs and CO2 equivalent variations in
confined spaces, e.g. meeting rooms or vehicle cabins. The dual signal output can be used to control ventilation on-demand, saving energy and reducing cost-of ownership.


Features:

  1. Calibration-free
  2. Low power
  3. Wide VOCs detection range
  4. High sensitivity
  5. High resistance to shocks and vibrations

Specifications:

  1. Supply Voltage 3.3V DC regulated /- 5%
  2. Operating Power 125 mW
  3. Warm-up Time 15 min
  4. Operating Temperature 0°C to 50°C
  5. Operating Humidity 0%RH to 95%RH (non condensing)
  6. Storage Temperature -40°C to 80°C
  7. Storage Humidity 0%RH to 95%RH (non condensing)

Package Includes:

1 x AMPHENOL SGX MICS-VZ-89TE. INTEGRATED SENSOR BOARD, 3.3VDC 0.125W

2,600₹  Inc Tax
ACM2000 Carbon Monoxide Sensor (Gas Sensor)

ACM2000 carbon monoxide electrochemical sensor is the latest product rolled out by Losing. This sensor detects CO concertation by measuring redox current in a two-electrode configuration. It demonstrates the merits of fast-response and long life. Similar two-electrode CO sensors in the market can be substituted directly with this sensor. For more information about ACM2000 or other products, please contact us

Applications: 

CM2000 sensor can work as the CO-sensitive component in CO analyzers. CO analyzers can be
applied for CO concentration detections in the following scenarios:

  1. Residential
  2. Fire Detection
  3. Ventilation Control
  4. Industrial Environment Detection

Features:

  1. Long life
  2. Stable output
  3. Fast response
  4. Low power

Specifications: 

  1. Measurement range: 0~500 ppm
  2. Maximum overload: 1000 ppm
  3. Sensitivity: > 15 nA/ppm
  4. Response time: T90 ≤ 45 s (0 to 50 ppm)
  5. Zero drift: (-10~50°C) ≤ 10 ppm
  6. Repeatability: ≤ 5%
  7. Output drift: < 10%/annum
  8. Operating life: 5 years in normal use
  9. Storage life: 6 months in original packaging

ELECTRICAL:

  1. Resolution 1 ppm
  2. Recommended load resistor 10 Ω
  3. MECHANICAL
  4. Housing material NORYL
  5. Weight <6 g
  6. Orientation Any

 

ENVIRONMENTAL:

  1. Temperature range -10 ~ 50℃
  2. Pressure range 0.9 ~ 1.1 Bar
  3. Humidity range 15 ~ 90% RH (non-condensing)

Packages Includes: 

1 x ACM2000 Carbon Monoxide Sensor

1,500₹  Inc Tax
Distribution of Gas Monitoring Sensor

Product Details:

Minimum Order Quantity1 Piece
Frequency10~300Hz
Relative Humidityless Than Equal To85%
Overall Dimensions35X84 mm
Supply VoltageDC 24V
BrandR S Enter

Gas Distribution Monitoring Systems : Unlike many competitors who sell boxes, PMAS delivers total secure end-to-end connectivity solution that seamlessly integrates remote devices & sites to centralized management systems i.e. SCADA. No changes in the existing system are needed. Gas Monitoring Systems is operator-independent and allows customer to implement two way communication in a similar manner all around the world.


Features:

  • Reliable
  • Industry Leading Prices
  • Easy Maintenance
25,000₹  Inc Tax
Waveshare MQ-7 Gas Sensor (Gas Sensor)
The MQ-7  gas sensor is a  gas sensor module that incorporates MQ-7, designed for air quality monitoring. It can be used to measure Carbon Monoxide from Different Types of Gasses, then generate digital signals for triggering air treatment devices.

Features :
  • Sensitive for carbon monoxide
  • Output voltage boosts along with the concentration of the measured gases increases
  • Fast response and recovery
  • Adjustable sensitivity
  • Signal output indicator
600₹  Inc Tax
Mq 3 Alcohol Detector Gas Sensor Module
This is a very easy to use low cost semiconductor Gas sensor Module with analog and digital output. This module uses MQ3 Alcohol gas sensor as a alcohol gas sensing element. It requires no external components just plug in Vcc & ground pins and you are ready to go.
For Digital output the threshold value can be easily set by an on-board potentiometer.  Using this module you can easily interface MQ3 Alcohol sensor to any Microcontroller, Arduino or even Raspberry Pi.
Since this Gas Sensor module is sensitive to alcohol it can be used in breathalyser. MQ3 Sensor also has small sensitivity to Benzine.
150₹  Inc Tax
Stainless Steel Pressure Transducer Sensor

If you are working on a device that converts an input mechanical pressure into an electrical output signal. Then this Sensor is essential for you. These types of sensors are used in altimeters, barometers, sensing printer ink levels, the airflow rate in equipment, IT center/ computer cooling systems, semiconductor process equipment, and laser measurement.

This Pressure Transducer is Part of All New Product  Line Up from findallnearme.com . The Pressure Transducer is made from High-Quality stainless steel material providing it with rigidity. The transducer comes with a standard thread size of G1/4 inches and can work in both air and water. The sensor gives a digital output in the range of 0.5V to 4.5V while operating at 5VDC. The sensor has stable performance characteristics with a long operation life.

Applications:
  1. Pressure Detection in Oil Tank, Gas Tank.
2,500₹  Inc Tax
Grove Temperature & Humidity Sensor Pro (Grove Temperature & Humidity Sensor Pro)
Grove – DHT22 is a high accuracy temperature and humidity sensor based on the DHT22 module (also known as AM2302 or RHT03). High-cost performance and high precision make it ideal for temperature and humidity monitoring of Arduino and Raspberry Pi, you can also use it to make a thermometer and hygrometer.
The DHT22 includes a capacitive humidity sensor and a high precision temperature sensor. The range of humidity sensor is 0 to 99.9 %RH with ±2% accuracy while the temperature sensor ranges from -40 to 80℃ with ±0.5℃ accuracy. With the help of a built-in 8-bit microcontroller, the DHT22 converts the analogue output of those two sensors to the digital signal, and outputs both temperature and humidity data via a single pin.

Features : 

  • Small
  • Very sensitive
  • Energy efficient
  • Maximum response time of 20 seconds
  • Measures temperature between -40 and 80 °C ( ±0.5 °C)
  • Measures humidity between 5 and 99% ( ±2%)


Package Includes :
  • 1 x Grove Temperature & Humidity Sensor Pro
  • 1 x JST cable
1,400₹  Inc Tax
Plastic DHT 11 Temperature Humidity Sensor Module, For Industrial, 3.3V-5V (DHT11)

Product Specification

Usage/ApplicationIndustrial
TypeSENSOR
BrandRS Enter
MaterialPlastic
Model Name/NumberDHT11
Output TypeDIGITSL-ANALOG
Voltage3.3V-5V
Minimum Order Quantity1

225₹  Inc Tax
DHT20 SIP Packaged Temperature and Humidity Sensor -40 ~ 80℃ (DHT20 SIP Packaged Temperature and Humidity Sensor)
DHT20 is a new upgraded product of DHT11, equipped with a dedicated ASIC sensor chip, a high-performance semiconductor silicon-based capacitive humidity sensor and a standard on-chip temperature sensor, and uses a standard I2C data output signal format. Its performance has been greatly improved and has exceeded the reliability level of the previous generation sensor(DHT11). The new generation of upgraded products have been improved to make their performance more stable in high temperature and high humidity environments at the same time, the accuracy, response time, and measurement range of the product have been greatly improved.
Each sensor is rigorously calibrated and tested before leaving the factory to ensure and satisfy customers’ large-scale applications.

Features : 

  • Fully calibrated
  • Digital output, I2C interface
  • Excellent long-term stability
  • Quick response and strong anti-interference ability
  • Wide voltage support 2.2-5.5V DC


Package Includes :
  • 1 x Sensor Model DHT20
250₹  Inc Tax
DHT22 Temperature and Humidity Sensor Module (DHT22 Temperature and Humidity Sensor Module)
Product Description :

The DHT22 is a basic, ultra low-cost digital temperature and humidity sensor.

It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed).

Its fairly simple to use, but requires careful timing to grab data.

The only real downside of this sensor is you can only get new data from it once every 2 seconds, so when using our library, sensor readings can be up to 2 seconds old.

Specifications : 

  • Voltage: 3 to 5V power
  • Temperature readings: ±2°C
  • Current max: 2.5mA
  • Item Weight: ‎10 g


Package Includes :
  • 1 x DHT-22 Temperature and Humidity Sensor Module
400₹  Inc Tax
AM2322 Temperature and Humidity Sensor (AM2322 Temperature and Humidity Sensor)

AM2322 digital temperature and humidity sensor are a contain calibration digital composite signal output of the temperature and humidity sensor. Using special technology of collecting the data on temperature and humidity, ensure that the product has very high reliability and excellent long-term stability. Includes a capacitive moisture sensor element and a high precision integrated temperature measuring element, And is connected to a high-performance microprocessor. The product has the excellent quality, super-fast response, strong anti-interference ability, and an extremely high performance-price ratio. AM2322 communication mode using a single bus and standard I2C, two kinds of communication modes. A standard single bus interface, makes the system integration becomes simple and fast. Super small volume, low power consumption, and signal transmission distance of 20 meters make it all kinds of applications of the best choice for even the most demanding applications. In I2C communication mode with a standard communication sequence, the user can be directly hung on the I2C communication bus, no additional wiring, and simple to use. Two kinds of communication modes are used directly output after temperature compensation, humidity, temperature and calibration of CRC and other digital information, users need to the second calculation of digital output, No need to compensate the temperature-humidity, accurate temperature, and humidity information can be got. Two kinds of communication modes are free to switch, users can choose, easy to use, and wide application fields. Product is 4 wire, convenient connection, special packaging format can be provided according to user requirements.

Features : 

  • Temperature and humidity sensor
  • Fully calibrated
  • Digital signal output
  • Excellent long-term stability
  • Low power consumption, high-cost performance
  • Standard I2C bus output
  • Standard single bus output

Specifications : 

  • Power supply voltage: 5.5V
  • Low level output voltage: 30mV
  • High level output voltage: 100%VDD
  • Output current: 8mA
  • Resolution: 0.024%RH
  • Accuracy: ±2 %RH

Package Includes :
  • 1 x AM2322 Temperature and Humidity Sensor
520₹  Inc Tax
Xcluma DHT11 Digital Relative Humidity & Temperature Sensor Module for Arduino (Xcluma DHT11 Humidity & Temperature Sensor Module)
Product Description :
  • Can Detect Ambient Humidity And Temperature Sensor Dht11
  • Humidity Measuring Range: 20%-95% (Range 0-50 Degrees) And Humidity Measurement Error: -5% Temperature Measurement Range: 0-50 Degree Temperature Measurement Error: -2 Operating Voltage 3.3v-5v
  • Output Digital Output Fixed Bolts Holes, Is Easy To Install Small Board Pcb Dimensions: 3.2cm*1.4cm
  • Power Led (Red) Vcc Add-Ins 3.3v-5v Gnd External Gnd , Do Small-Plate Switch Digital Output Interface Connect Monolithic Integrated Circuit Io Mouth

Specifications : 

  • Voltage: 3 to 5V power
  • Temperature readings: ±2°C
  • Current max: 2.5mA
  • Item Weight: ‎10 g

Package Includes :
  • 1 x Xcluma DHT11 Digital Relative Humidity & Temperature Sensor Module for Arduino
250₹  Inc Tax
DHT11 Temperature and Humidity Sensor Module for Arduino and Raspberry Pi (DHT11-Temperature and Humidity Sensor Module)
Product Description :

The DHT11 is a basic, ultra low-cost digital temperature and humidity sensor.

It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed).

Its fairly simple to use, but requires careful timing to grab data.

The only real downside of this sensor is you can only get new data from it once every 2 seconds, so when using our library, sensor readings can be up to 2 seconds old.

Specifications : 

  • Voltage: 3 to 5V power
  • Temperature readings: ±2°C
  • Current max: 2.5mA
  • Item Weight: ‎10 g

Features : 

  • Low cost, 2.5mA max current use during conversion (while requesting data)
  • 3 to 5V power and I/O, Body size 15.5mm x 12mm x 5.5mm
  • Good for 20-80% humidity readings with 5% accuracy
  • Good for 0-50°C temperature readings ±2°C accuracy
  • No more than 1 Hz sampling rate (once every second), 4 pins with Approximate 0.1" spacing


Package Includes :
  • 1 x DHT-11 Digital Temperature And Humidity Sensor for Arduino Raspberry Pi
350₹  Inc Tax
Per Page      21 - 40 of 190