Search
Search Criteria
Products meeting the search criteria
Universal temperature measurement for liquids and gases. With its product portfolio of screw-in and insertion thermometers as well as temperature switches SICK offers high-quality solutions for contact temperature measurement in liquids and gases.
SICK connects - complete connectivity from a single source. SICK provides connection devices that easily connect to other devices in your machine, regardless of the selected automatic identification technology.
Wireless GPS NEO 6M Sensor Module
Description:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Brand | RS Enter |
| Voltage | 5 V -12 V DC |
| Size | 16 x 12.2 x 2.4 mm |
Description:
The NEO-6 module series is a family of stand-alone GPS receivers featuring the high performance u-blox 6 positioning engine. Their compact architecture and power and memory options make NEO-6 modules ideal for battery operated mobile devices with very strict cost and space constraints.
The 50-channel u-blox 6 positioning engine boasts a Time-To-First-Fix (TTFF) of under 1 second. The dedicated acquisition engine, with 2 million correlators, is capable of massive parallel time/frequency space searches, enabling it to find satellites instantly. Innovative design and technology suppresses jamming sources and mitigates multipath effects, giving NEO-6 GPS receivers excellent navigation performance even in the most challenging environments.
300W 10A DC-DC Step-down Buck Converter Adjustable Constant Voltage Module
The Module is made from a dedicated benchmark IC and high-precision current sensing resistor, proving a more stable constant current, (when 20°C to 100°C constant current 1A, temperature drift less than 1%); and therefore it is particularly most suitable for LED driver applications. The output current of the module can be raised up to 10A(for continuous use it is recommended up to 8A with additional cooling fan).
To enhance the stabilization in output voltage has four high-frequency capacitance which gives the lower output ripple. Double heat sink design provides easy and fast heat dissipation. MOS Schottky diode independent heat sink, which heat dissipation is good, and won’t affect each other. Also using large size Sendust Core and double pure copper wiring, improve working efficiency, reduce fever.
ESP-32S Wifi Bluetooth Combo Module
ESP-32S Wifi Bluetooth combo module is ultra-high performance and ultra-low-power consumption Wi-Fi and Bluetooth combo wireless platform based on ESPRESSIF ESP32 chipset. ESP-32S integrates the dual-core processor, 448 KByte ROM,520 KByte SRAM,16 KByte SRAM in RTC, 802.11 b/g/n/e/I Wi-Fi, Bluetooth v4.2 BR/EDR & BLE, clocks & Times, abundant peripheral Interfaces and security mechanism.
ESP-32S Wifi Bluetooth combo module provides SDK Firmware for fast on-line programming and open source toolchains based on GCC for development support. It is designed for Generic low power IoT sensor hub, loggers, video streaming for the camera, Wi-Fi & Bluetooth enabled devices, Home automation and mesh network applications, aimed at makers, hardware engineers, software engineers and solution provides.
ESP32 is a single chip 2.4 GHz Wi-Fi and Bluetooth combo chip designed with TSMC ultra-low power 40 nm technology. It is designed and optimized for the best power performance, RF performance, robustness, versatility, features, and reliability, for a wide variety of applications, and different power profiles.
ESP32 is the most integrated solution for Wi-Fi Bluetooth applications in the industry with less than 10 external components. ESP32 integrates the antenna switch, RF balun, power amplifier, low noise receive amplifier, filters, and power management modules. As such, the entire solution occupies minimal Printed Circuit Board (PCB) area.
ESP32 is designed for mobile, wearable electronics, and the Internet of Things (IoT) applications. It has many features of the state-of-the-art low power chips, including fine resolution clock gating, power modes, and dynamic power scaling.
Fiber AC/DC Power ESP8266 WIFI Single Relay ESP-12F Dev Board
AC/DC power ESP8266 WIFI single relay ESP-12F Dev board comes with onboard ESP-12F WiFi module, I/O orifice full lead, support AC90-250V/DC7-12V/USB 5V etc. many supply power ways. Provide Arduino develop environment reference code, suit for ESP8266 secondary development study, smart home wireless control.
Specification and Feature:Onboard Mature and stable ESP-12F WiFi module, high capacity 4M Byte FlashThe I/O port of the WiFi module and the UART program download port are all extracted, convenient secondary developmentOnboard AC-DC switch power module, supply power way support AC90-250V/DC7-12V/USB5VOnboard Wifi module RST reset buttonESP-12F support use Eclipse/Arduino IDE etc.Onboard 1 channel 5V relay, output switch signal,Suitable for controlling and controlling the working voltage to be within the load of AC 250V/DC30V.Onboard power indicator,1 programmable LED and relay indicator.Package Included:1 x AC/DC power ESP8266 WIFI single relay ESP-12F Dev board
ESP-01 ESP8266 Serial WI-FI Wireless Transceiver Module, 30
The module(ESP-01) can work with AT comma when used with Arduino, USB to TTL adaptor (FTDI USB module is recommended). The additional power supply might be needed to power up the board. With GCC toolchain and SDK availability opportunities with ESP8266 as an IOT device is endless.
What is this ESP8266?
It''s a wireless SOCIt has GPIO, I2C, ADC, SPI, PWM and some moreIt''s running at 80MHz64KBytes of instruction RAM96KBytes of data RAM64KBytes boot ROMIt has a Winbond W25Q40BVNIG SPI flashIt''s a RISC architectureThe core is a 106micro Diamond Standard core (LX3) made by TensilicaThe ESP8266 chip is made by EspressifModules bearing this chip are made by various manufacturersSpecification:802.11 b/g/n protocolWi-Fi 2.4 GHz, support WPA/WPA2Super small module size (11.5mm x 11.5mm)Integrated 10-bit ADCIntegrated TCP/IP protocol stack (ipv4 only at the moment)Integrated TR switch, balun, LNA, power amplifier and matching network Integrated PLL, regulators, and power management units 20dBm output power in 802.11b modeSupports antenna diversityDeep sleep power <10uA, Power down leakage current < 5uAIntegrated low power 32-bit MCUSDIO 2.0, SPI, UART, I2CSTBC, 1x1 MIMO, 2x1 MIMOA-MPDU & A-MSDU aggregation & 0.4μs guard intervalWake up and transmit packets in < 2msStandby power consumption of < 1.0mW (DTIM3)Operating temperature range -40C ~ 125C
REES52 HC05 Bluetooth Transceiver Sensor Module
| Model Name/Number | REES52 |
| Country of Origin | Made in India |
| Code | HC05 |
| Output | TTL |
| Packing Type | Box |
The bluetooth transceiver module is used as UART serial converter module. It can easily transfer the UART data through the wireless bluetooth, without complex pieceB layout or deep knowledge in the bluetooth software stack, you can also connect this bluetooth module with your devices listed below, MCU, ARM or DSP systems, GPS or GSM, Sensor Modules, SOC systems. Personal Digital Assistants (PDAs), computer accessories.
Additional Information:
- Item Code: HC-05
- Delivery Time: 1
- Packaging Details: 1 PCS *HC-05
WiFi Wireless Smart Switch Relay Module for Smart Home 5V 5V/12V, 10A
The wireless switch supports inching /self-locking mode. Users can add the device to the APP eWeLink to remote control connected home appliances or devices.In self-locking mode, customers can remotely turn on/off connected devices immediately.When in inching mode, customers can have two wiring ways to select :Turn on 1s and then auto-off.Turn off 1s and then auto-on.The product enables remote control of home appliances through the mobile application eWeLink, available on both Android and iOS.
Supported functions :Remote turn on/offTiming SchedulesDevice SharingGroup Management
Specification :Dimensions:70.5mm*27.4mm*23mm.Operating current: 5V DC(ordinary phone charger can be used,not included)LEDs: 3 LEDs which indicate working mode, wifi status, relay on/off status respectively.Board consumption: <1W.Standby current: 80mA.Max input current: 10A.Max switching voltage: <250V.Relay lifespan: more than one million times.Electrical insulation resistance 100M.Electric shock voltage: 1000V.Relay maximum pull time: 15ms.Relay maximum release time: 5ms.Operating temperature: -40 degrees to 70 degrees.Operating Humidity 40% ~ 80% RH.Rated switching voltage: <250V.
ESP8266 ESP-01 12V 2 Channels WiFi Relay Module Things Smart Home Remote Control Switch
This WiFi relay module carries an ESP8266 WiFi module and microcontroller. It will send the serial port instructions to the cell phone APP and Implementation within the local area network (LAN) for wireless control relay.
This module is ideally suited to controlling larger voltages in your project through WIFI. This is a 2 channel relay module that can be used to activate up to 250V AC and 30V DC. This allows you to build in device control, operating remote lights, or triggering systems when the module is supplied with a signal from an ESP8266 module.
The module has an LED that lights relative to the state of the module. A red power activation LED that lights when a signal is received on the IN pin. When a signal is received an audible click can be heard as the relay triggers, connecting the output pins. The relay is controlled via the included ESP8266. This will require configuration via UART prior to full operation. Once it is programmed and powered it will look after itself, making it ideal for use in internet of things IOT based projects.
W5100 Ethernet Module Ethernet Network Module
The WCS1700 current sensor provides economical and precise solutions for both DC and AC current sensing in industrial, commercial, and
communications systems. The unique package provides easy implementation without breaking the original system and makes current sensing possible. Typical applications include motor control, load detection and management, over-current fault detection, and any intelligent power management system, etc.
The WCS1700 consists of a precise, low-temperature drift linear hall sensor IC with temperature compensation circuit and diameter 9.0mm
through-hole. Users can use the system’s own electric wire bypass it through this hole to measure passing current. This design allows system designers to monitor any current path without breaking or changing the original system layout at all. Any current flowing through this hole will generate a magnetic field that is sensed by the integrated Hall IC and converted into a proportional voltage.
Weigand AR031 SD Card Module Slot Socket Reader
SD Card Reading Writing Module for Arduino with the on-board 3.3V regulator. This SD Card module can make your SD application easier and simple. Through programming, you can read and write to the SD card using your Arduino. With the help of this module, can use for SD Card more easily, such as for MP3 Player, MCU/ARM system control. It can be easily interfaced as a peripheral to your Arduino, and other embedded boards and micro-controllers. Through programming, you can read and write to the SD card over the SPI interface.
XH-M131 DC 12V Light Control Switch Photoresistor Relay Module
Buy the new XH-M131 DC 12V Light Control Switch Photoresistor Relay Module. The Light Detection and brightness detection, detection can be adjusted via potentiometer brightness valve point comes relays, and do all kinds of brightness detection switch, you can control all kinds of street lights automatically turn on at night, during the day and automatically turns off and car supplies control and automation equipment.Using the photoresistor induction light intensity comes with the relay and direct control load. It has a Distribution bit sensitivity adjustment. The start relay threshold is set by adjusting the potentiometer. 12 V power input is designed for relay board regulator transistors to provide sensors and is Used to make the product more stable and reliable. It has four fixed bolt hole for easy installation.
DS3231 Real Time Clock (RTC) Module, 32K (DS3231)
This Infrared Obstacle Avoidance Sensor Module is an inexpensive solution to avoidance detection for robotics and other electronics uses. It comes as an assembled module, as shown above, there are only four pins: 5-volts, GND, output, and EN. Output is an active LOW and has an onboard status LED. It’s very easy to interface directly with micro-controllers. It also works with the Raspberry Pi with a voltage range of 3-6 volts. Connect Vcc to 3-volts.
The enable pin “EN” will disable the device when HI (Vcc) and enable when LO (GND). The onboard jumper can be left open to allow external control of enable/disable of the module. There are two potentiometers on the module one controlling operating frequency (centred at 38 kHz) the other controlling intensity. The detector was designed for 38 kHz and the onboard oscillator circuit is based on a 555 timer.
The enable pin “EN” will disable the device when HI (Vcc) and enable when LO (GND). The onboard jumper can be left open to allow external control of enable/disable of the module. There are two potentiometers on the module one controlling operating frequency (centred at 38 kHz) the other controlling intensity. The detector was designed for 38 kHz and the onboard oscillator circuit is based on a 555 timer.
Infrared IR Distance / Proximity Sensor Sharp GP2Y0A02YK0F (GP2Y0A02YK0F)
The Sharp distance sensors are a popular choice for many projects that require accurate distance measurements. This IR sensor is more economical than sonar rangefinders, yet it provides much better performance than other IR alternatives. Interfacing to most microcontrollers is straightforward: the single analog output can be connected to an analog-to-digital converter for taking distance measurements, or the output can be connected to a comparator for threshold detection. The detection range of this version is approximately 20 cm to 150 cm (8″ to 60″).
The GP2Y0A02 uses a 3-pin JST PH connector that works with our 3-pin JST PH cables for Sharp distance sensors (not included); the top picture on the right shows a shorter-range Sharp analog distance sensor with one of these cables. These cables have 3-pin JST connectors on one end and are available with pre-crimped male pins, pre-crimped female pins, and with unterminated wires on the other end.
The GP2Y0A02 uses a 3-pin JST PH connector that works with our 3-pin JST PH cables for Sharp distance sensors (not included); the top picture on the right shows a shorter-range Sharp analog distance sensor with one of these cables. These cables have 3-pin JST connectors on one end and are available with pre-crimped male pins, pre-crimped female pins, and with unterminated wires on the other end.
7 Color Flash Sensor Module For ARDUIN0
This is 7 color flashing LED module 5mm round high-brightness light-emitting diode. The module contains a 7-color 5mm LED with a built-in chip that sequentially flashes each color in turn. The color pattern is repeated in about 15 seconds.
Specification:Product Type: LEDShape: Round LED 5mm DIP typeLens type: white mistStandard Forward Voltage: 2.5-6V Forward Current: 40mA
Specification:Product Type: LEDShape: Round LED 5mm DIP typeLens type: white mistStandard Forward Voltage: 2.5-6V Forward Current: 40mA
Mini PIR Sensor Module (ML020)
This device is a miniature passive Infrared (PIR) motion sensor that features automatic control and a repeatable trigger. Typical applications include security products, industrial automation and control, auto sensing of electrical equipment, lighting, toys, etc.
HC-SR505 Mini Infrared PIR Motion Sensor Precise Infrared Detector Module H
HC-SR505 small body sensing module is based on infrared technology, automatic control products, high sensitivity, high reliability, ultra-small, ultra-low-voltage operation mode. Widely used in various auto-sensing of electrical equipment, especially battery-powered automatic control products.
HC-SR505 Mini Infrared PIR Motion Sensor Precise Infrared Detector Module H
HC-SR505 small body sensing module is based on infrared technology, automatic control products, high sensitivity, high reliability, ultra-small, ultra-low-voltage operation mode. Widely used in various auto-sensing of electrical equipment, especially battery-powered automatic control products.
White TEC1-12706 Thermoelectric Peltier Cooler Module, 12V (TEC1-12706)
hermoelectric coolers (TEC or Peltier) create a temperature differential on each side. One side gets hot and the other side gets cool. Therefore, they can be used to either warm something up or cool something down, depending on which side is used. You can also use temperature differential to generate electricity.
A thermoelectric cooling (TEC) module is a semiconductor-based electronic component that functions as a small heat pump. By applying DC power source to a TEC, heat will be transferred from one side of the module to the other. It creates a cold and hot side. They are widely used in industrial areas, for example, computer CPU, CCDs, portable refrigerators, medical instruments, and so on.
When exposed to different temperatures on both sides it will also work as a generator and generate electricity depending on the temperature difference
ADXL335 - Triple Axis Linear Accelerometer (ADXL335)
ADXL335 is a Breakout board based on 3 axis ADXL335 IC from Analog Devices. The Accelerometer Module require no external devices and works on 5V power supply. It can be directly interfaced to ADC of a microcontroller without any external components.
This module can be used to sense motion or tilt(in case of non moving) in 3 axis.This is the latest in a long, proven line of Analog Sensors- the holy grail of accelerometers. The ADXL335 is a triple axis MEMS accelerometer with extremely low noise and power consumption - only 320uA! The sensor has a full sensing range of /-3g The burst echo to return to the sensor. By measuring the echo pulse width, the distance to target can easily be calculated.
Features of ADXL335:
3-axis sensing.Small, low profile package.4 mm × 4 mm × 1.45 mm LFCSP.Low power : 350 μA (typical).Single-supply operation: 1.8 V to 3.6 V.10,000 g shock survival.Excellent temperature stability.BW adjustment with a single capacitor per axis.RoHS/WEEE lead-free compliant.
| Brand | REES52 |
| Part Number | ADXL335 |
| Accelerometer Type | AC Response |
| Number of Axes | 3 |
| Sensing Axis | XYZ |
| Output Type | Analog |
| Excitation Voltage | 1.8 V to 3.6 V. |
| Operating Temperature Range | -20 to 70 deg C |
ADXL335 is a Breakout board based on 3 axis ADXL335 IC from Analog Devices. The Accelerometer Module require no external devices and works on 5V power supply. It can be directly interfaced to ADC of a microcontroller without any external components.
This module can be used to sense motion or tilt(in case of non moving) in 3 axis.This is the latest in a long, proven line of Analog Sensors- the holy grail of accelerometers. The ADXL335 is a triple axis MEMS accelerometer with extremely low noise and power consumption - only 320uA! The sensor has a full sensing range of /-3g The burst echo to return to the sensor. By measuring the echo pulse width, the distance to target can easily be calculated.
Features of ADXL335:
3-axis sensing.Small, low profile package.4 mm × 4 mm × 1.45 mm LFCSP.Low power : 350 μA (typical).Single-supply operation: 1.8 V to 3.6 V.10,000 g shock survival.Excellent temperature stability.BW adjustment with a single capacitor per axis.RoHS/WEEE lead-free compliant.
49E Linear Hall Effect Sensor Module (AB030 49E)
Product Specification
| Part Number | AB030 49E |
| Application | Industrial, Sensing & Instrumentation, Medical |
| Operating Supply Voltage | 2.3V ~ 5.3V |
| Pin Count | 3 Pin |
| Operating Temperature | -40 to 90 Deg C |
| Current Consumption at Rest | 3mA |
| Current Consumption when Switched | 8 mA |
| Mounting holes size | 2 mm |
Product Description
Hall Switch Integrated Circuit Using hall Effect Principle. USES The Semiconductor Integrated Technology Manufacturing Magnetic Susceptibility of the Circuit. Its Input For the Magnetic Induction Intensity, the Output is a Digital Voltage Signal.
Features:
Features:
- Analog magnetic sensor module and a digital interface
- Built-in 13 LED build a simple circuit to produce a magnetic flash
- Black PCB board, made of the flame retardant epoxy resin material
- Small size and high sensitivity.
- Fast response temperature and good performance.
- Motor speed measurement
- Object position detection
- Smart car
- Electronic bricks
- VCC ↔ 2.3V ~ 5.3V
- GND ↔ power supply ground
- AOUT ↔ MCU.IO (analog output)
- DOUT ↔ MCU.IO (digital output)
Temperature Sensor
Product Details:
| Minimum Order Quantity | 1 Piece |
| Color | White |
| Material | Stainless Steel |
| Voltage | 10 V |
| Measuring Ranges | -20 Deg C - 80 Deg C |
Universal temperature measurement for liquids and gases. With its product portfolio of screw-in and insertion thermometers as well as temperature switches SICK offers high-quality solutions for contact temperature measurement in liquids and gases. The devices can optimally be adapted to meet individual requirements through its various insertion lengths and the flexible mechanical configuration possibilities.
At a glance:
- Large display
- Individually programmable transistor outputs PNP or NPN, optional analog output 4 mA ... 20 mA or 0 V ...
- Round connector M12 x 1
- Pt1000 element, accuracy class A (IEC 60751)
- Various insertion lengths and connection threads
- Wetted parts made from corrosion-resistant stainless steel 1.4571
- Enclosure rating IP 65 and IP 67
- Your benefits
- Quick and safe set-up through superior ease of use
- Compact dimensions and rotatable housing facilitate integration
- Very reliable: splash-proof housing, high-grade materials, rugged design, and field-proven technology
- Very good long-term stability, accuracy and linearity
- Quick response time
- Versatile configuration allows for optimal solutions for specific requirements
Product Group:
- In this type of sensors group Resistance thermometer (TBS, TBT, and TCT) series are available.
- Protection Class
- Protection class can be up to IP69K.
Universal temperature measurement for liquids and gases. With its product portfolio of screw-in and insertion thermometers as well as temperature switches SICK offers high-quality solutions for contact temperature measurement in liquids and gases.
Connectivity Sensor
Product Details:
| Brand | R S Enter |
| Size | 8 m |
| Rated operational voltage | 10 - 36 V |
| Distance | upto 16 mm |
SICK connects - complete connectivity from a single source. SICK provides connection devices that easily connect to other devices in your machine, regardless of the selected automatic identification technology. These devices enable easy integration of field bus gateways into the modular connection boxes, making it possible to incorporate the scanner, camera or RFID systems into different field bus technologies. A field bus proxy, external parameter memory, display, and power modules provide a high degree of application flexibility.
At A Glance:
- Connection module for one ID pro sensor
- Clearly visible, easily accessible screw- and spring-loaded terminals
- Connection diagram on the inside of the lid
- Configuration with switches
- IP 65 connection for one ID pro sensor using standard connection cable
- Basis for CMC600 parameter cloning module
- Service plug for direct access to the AUX interface
Your benefits:
- Compact design fits into small spaces
- Two mounting holes for fast, precise installation saves on installation costs
- Clearly labeled, easily accessible screw- and spring-loaded terminals save time when connecting to peripherals
- Quick, easy configuration with switches reduces installation time
- Industrial-standard connection guarantees a reliable application solution
- CMC600 parameter cloning module allows rapid exchange and replacement of connected sensors
Product Family:
- In this type of sensors CDM, CDF, CDB series are available.
- Protection Class
- Protection class can be up to IP69K.
SICK connects - complete connectivity from a single source. SICK provides connection devices that easily connect to other devices in your machine, regardless of the selected automatic identification technology.