Sensors & Module
A voltage-raising module with a maximum capacity of 8 watts follows the input supply voltage, where the output is fixed at 12 volts. The output can be changed by changing the resistors on the module, to give an output voltage of up to 20 volts.
Features :-- The possibility of adjusting the output voltage in a wide range of 5-12 volts.
- The module contains a place for installing the USB jack.
- It is not recommended that the output voltage be ten times greater than the input voltage to avoid damage and overheating.
- Equipped with indicator light.
| Voltage | 3.3V - 5V DC |
| Operating Temperature | -20 to 55 Degree C |
| Rated Pressure | 25 kPA |
Features:
- On-board ADXL345, it's a low cost cap-based accelerometer sensor
- Support 5V/3.3V voltage input, onboard RT9161, better performance than 1117, faster load the appropriate speed, it is ideal for high noise power supply environment
- Common Pins were lead out, Pin distance is standard 100mil (2.54mm), compatible for your new system
| Voltage | 5 V -12 V DC |
| Quad-band | Gsm / gprs 850 / 900 / 1800 / 1900 mhz |
| Operating Temperature | -20 to 55 Degree C |
| Rated Pressure | 20 kPA |
This GSM Modem can accept any GSM network operator SIM card and act just like a mobile phone with its own unique phone number. Advantage of using this modem will be that you can use its RS232 port to communicate and develop embedded applications. Applications like SMS Control, data transfer, remote control and logging can be developed easily.
The modem can either be connected to PC serial port directly or to any microcontroller through MAX232. It can be used to send and receive SMS or make/receive voice calls. It can also be used in GPRS mode to connect to internet and do many applications for data logging and control. In GPRS mode you can also connect to any remote FTP server and upload files for data logging.
This GSM modem is a highly flexible plug and play quad band SIM900A GSM modem for direct and easy integration to RS232 applications. Supports features like Voice, SMS, Data/Fax, GPRS and integrated TCP/IP stack.
Features:
- Built in RS232 Level Converter (MAX3232)
- Configurable baud rate
- SMA connector with GSM L Type Antenna.
- Built in SIM Card holder.
- Built in Network Status LED
- Inbuilt Powerful TCP/IP protocol stack for internet data transfer over GPRS.
- Audio interface Connector
- Most Status & Controlling Pins are available at Connector
Product Details:
| Adjustment | Single Capacitor Per Axis. |
| Single Supply Operation | 1.8 v to 3.6 v |
| Voltage | 3 V - 6 V DC |
| Ultra Low Power | 40uA |
Description:
It is Breakout board for the Analog Device''s ADXL345 Tripple axis accelerometer with Voltage regulator onboard. The module is populated with MOSFET based Voltage level conversion circuitry to enable you to interface different type of microcontrollers (3V3 & 5V) . Apart from the above all necessary components like decoupling capacitors , filter capacitors ,Pull up resistors and LED are also populated on board. So out of the box you are ready to go. The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit two''s complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface. The ADXL345 is well suited to measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (4 mg/LSB) enables measurement of inclination changes less than 1.0°.
Features:
- 3-axis sensing
- full-scale range of ±3 g
- Low power : 350 μA (typical)
- 10,000 g shock survival
- Excellent temperature stability
Product Details:
| Power Source | 5V |
| Brand | Rs Enter |
| Working Voltage | 5 V (DC) |
| Mounting Screw Hole | 3 mm |
Features:
- AO, analog output, real-time output voltage signal of the microphone
- DO, when the sound intensity reaches a certain threshold, the output high and low signal
- High sensitive microphone and high sensitivity
AM1011A analog temperature and humidity module is a have already calibrated analog signal output of the temperature and humidity sensor, the sensor signals using analog voltage loss, out of the way; This module has high precision, high reliability, good consistency, and with temperature compensation, ensure the long-term stability is good, easy to use and high performance, especially suitable for the quality, cost, more demanding enterprise to use.
Features :
- Excellent long-term stability
- Low power consumption, small size, high-cost performance
- Complete interchange
- Analogue voltage output
- Excellent long-term stability
Package Includes :
- 1 x Temperature and Humidity Sensor Model AM1011A
The RH/T sensor module AM2301B is equipped with a newly designed ASIC dedicated chip, an improved MEMS semiconductor capacitive humidity sensor and a standard on-chip temperature sensor, its performance has been greatly improved or even exceeded the reliability level of the previous generation of sensors, the new generation of temperature and humidity sensor, improved to make its performance in harsh environments more stable. Every sensor has been rigorously calibrated and tested. The structural design of the product shape has a certain protective effect on the sensor, and it is equipped with fixed mounting holes to make the product adapt to more installation scenarios.
Features :
- Fully calibrated
- Digital output, I²C interface
- Excellent long-term stability
- Quick response
- Strong anti-interference ability
- A variety of accessories to choose from
- Tailor-made application solutions
Package Includes :
- 1 x Temperature and Humidity Sensor Model AM2301B
This is a simple to use Arduino motion sensor. Power it up and wait 1-2 seconds for the sensor to get a snapshot of the still room. If anything moves after that period, the ‘alarm’ pin will go low. This sensor checks for infrared heat in its detecting angle. The human body, pets, and several other things emit energy that the sensor is looking for, it compares with the snapshot, and if there is a recent change it triggers.
Get on with your Home alarm security audit gear and experiment with this sensor to get a better understanding of its efficiency and working method. Infrared motion detectors are common all around the world for many different appliances. It’s great for an Arduino or home automation project that requires automated motion feedback. Commonly found on automatic trigger light systems, where lights are ON when someone is in range and OFF when no one is around. Save power or trigger other actuators like a door opener or pet feeder.
Features :- Low power consumption
- Compact size
- Cost-effective
- Adjustable sensitivity
- 1 x Digital infrared Motion Sensor
- 1 x Digital Sensor Cable
This is a PIR (passive infrared motion) sensor designed to work with Arduino and Raspberry Pi. It allows you to sense motion, it is commonly used to detect whether a human has moved in or out of the sensor’s range. They are small, inexpensive, low-power, easy to use, and don’t wear out. For that reason, they are commonly found in appliances and gadgets used in homes or businesses. They are often referred to as PIR, “Passive Infrared”, “Pyroelectric”, or “IR motion” sensors.
This PIR (Motion) Sensor can detect infrared signals from the human body or other animals and triggers movement. So it can be applied to a variety of scenarios that require motion detection. Conventional pyroelectric infrared sensors require body pyroelectric infrared detectors, integrated chipsets, complex peripheral circuits. So the size is slightly big, the circuit is complex, and reliability is slightly lower. We bring this new pyroelectric infrared motion sensor which is specially designed for your Arduino projects, an integrated digital body pyroelectric and infrared sensor, with small size, high reliability, low power consumption, and simple peripheral circuit. Very simple to use in any project.
Applications :
- Moving human detection
- Occupancy detection
- Security systems
- Low power consumption
- Compact size
- Cost-effective
- Adjustable sensitivity
- 1 x Gravity: Digital PIR Sensor
- 1 x Gravity: Digital Cable
This is a High-accuracy good quality IR sensor from Waveshare. Infrared Obstacle Avoidance IR Sensor Module (Active Low) has a pair of infrared transmitting and receiving tubes. When the transmitted light waves are reflected back, the reflected IR waves will be received by the receiver tube. The onboard LM393 voltage comparator circuitry does the processing and the green indicator LED comes to life.
The module features a 4 wire interface with Vcc, GND, DOUT, and an AOUT pin on its tail. It works fine with 3.3 to 5V levels. Upon hindrance/reflectance, the output pin gives out a digital signal (a low-level signal). The onboard preset helps to fine-tune the range of operation, the effective distance range is 2cm to 30cm.
Applications :- Robot path tracking
- Obstacle-avoiding car
- Pipeline counter
- Easy to assemble and use
- Onboard detection indication
- The effective distance range of 2cm to 30cm
- A preset knob to fine-tune distance range
- If there is an obstacle, the indicator lights on the circuit board.
- Emitting a beam of infrared, and receive the reflected beam
- Features wide-range voltage comparator LM393
- Adjustable sensitivity
- 1 x Infrared Proximity Sensor
- 1 x XH2.54 4PIN wire
This is 125KHz RFID Card used for Contactless transmission of data and supplies energy with no battery needed. Its Operating distance is Up to 100mm depending on antenna geometry. Operating frequency is 125KHz and Data transfer speed is 106 kbit/s.
It is featured with Data integrity of 16 Bit CRC, parity, bit coding bit counting which allows Anti-collision. These cards are typically used in ticketing transaction: <100 ms including backup management.
Applications :
- Public transportation
- Access control
- Event Ticketing
- Gaming & identity
- Contactless transmission of data and supply energy (no battery needed)
- Anticollision
- EEPROM
- 1Kbit, organized in 16 sectors, each district two passwords
- User definable access conditions for each memory block
- Data retention of 10 years.
- Write endurance 100 000 cycles
- Security
- Individual key set per sector (per application) to support multi-application with key hierarchy
- A unique serial number for each device
- Transport key protects access to EEPROM on-chip delivery
- 1 x 125KHz RFID Card – 5Pcs