Drone Kit

It’s going to be hard building your first drone, it could take hours, or even days to finish. When you encounter a problem, you might take advice from experienced pilots, or ultimately end up finding your way by trial and error. Either way, the journey is going to be extremely rewarding. We Robu.in brings here a solution, we provide technical support to make your dream come true using drone kit.

We provide all needy product in the DIY quadcopter camera kit combo pack. So let’s get your favourite combo pack at India’s best online shopping store. RC Drone making kit is available at an affordable price so to build a quadcopter is not costly now. We are the leading seller of high-quality RC quadcopter kit in India at a low price.

Sort By:  
S550 Hexacopter Combo Kit

Features:

  1. Made by advanced engineering material, super strong & smooth
  2. Easy to assemble and disassemble.
  3. The frame is tough and durable.
  4. The main glass fiber frame has good strength.
  5. The arm equips support ridges for better and faster forward flight.
  6. Features pre-threaded brass sleeves.
  7. Large mounting tabs for camera mounting.
  8. PCB for easy and neat wiring
  9. Easy assembly
35,000₹  Inc Tax
S500 Carbon Fiber Quadcopter Drone Frame Kit

Features :

  1. Made by advanced engineering material, super strong & smooth
  2. Easy to assemble and disassemble.
  3. The frame is tough and durable.
  4. The main glass fiber frame has good strength.
  5. The arm equips support ridges for better and faster forward flight.
  6. Features pre-threaded brass sleeves.
  7. Large mounting tabs for camera mounting.
  8. In-built power distribution board.

Package Includes:

1 x S500 Carbon Fiber Quadcopter Drone Frame Kit

5,000₹  Inc Tax
QAV250mm Quadcopter Combo Kit

This is a combo kit for the QAV250 quadcopter fame and essential electronics. This kit comes with all the components like motors, PDB, Flight Controller, ESC, Frame, etc.

Package Includes:

1 x  QAV250 Full carbon frame kit

4 x  MT2204Ⅱ 2300KV Brushless motor(2pcs CW 2pcs CCW)

4 x Emax Simonk12A Speed Controller

1 x  F4 V3S Plus Flight Control

1 x Power Distribution board

8,500₹  Inc Tax
Pixhawk 2.4.8 Flight Controller kit with GPS Module

PIXHAWK PX4 2.4.8 Flight Controller W/ SHOCK ABSORBER UBLOX NEO-M8N GPS GPS FOLDING ANTENNA BASE SET Pixhawk Power Module 433MHZ Telemetry PPM Encoder combo Kit gives you all necessary Control component for a quadcopter, in one kit with affordable price and good quality.

25,000₹  Inc Tax
Pixhawk 2.4.7 Flight Controller kit with GPS Module Combo Kit

PIXHAWK PX4 2.4.7 Flight Controller with SHOCK ABSORBER UBLOX NEO-M8N GPS Pixhawk Power Module PPM Encoder Combo Kit gives you all necessary Control component for a quadcopter, in one kit with affordable price and good quality.

25,000₹  Inc Tax
Martian 250mm Quadcopter Combo Kit

Features :

  1. Lightweight and Durable.
  2. Made by super strong and advanced engineering material.
  3. The frame has excellent strength.
  4. The arm equips dampers for the safe landing.
  5. The arm has multiple motor mounting holes.

Package Includes : 

1 x MARTIAN-II REPTILE 250mm Quadcopter Frame
1 x Power distribution board (SKU 61195)
4 x Vibration Dampers
1 x XT60 Connector
1 x F4 V3S Plus Flight Control (SKU 1203885)
1 x Set of Screws
6,500₹  Inc Tax
DYS Drone Power Combo Set (Original)

Features:

SE1407 Motor

  1. New design with imported NMB bearing
  2. N52 magnet and 0.2mm lamination
  3. Powerful with 450g thrust to work with 4″ Prop
  4. Special design for the FPV racer champions

BL20A BLHeli firmware ESC

  1. Designed specifically for multi-rotors
  2. Tiny form factor and low weight
  3. Preloaded with BLHeli, OneShot125 & Dampened Light (active braking) supported
  4. Fast throttle response – high 500Hz maximum refresh rate compatible with all flight controllers
  5. Twisted signal cable reducing the crosstalk during signal transfer
  6. Feature all new ultra-low resistance MOSFETs for superior current handling
  7. Thick PCB for better heat dissipation
  8. High-performance capacitor filter

Tri-Blade Propellers

  1. Very strong, lightweight, and fast response
  2. Quick to release, quick to attach
  3. Good efficiency and Ultra-durable
  4. Compatible with SE1407 CW CCW motors
  5. Durable plastic construction provides both lightness and rigidity.
  6. New design propellers, with greater aerodynamic efficiency, good lifting capacity.

Specifications:

SE1407 Motor

  1. KV: 3600
  2. Configuration: NP
  3. Stator Diameter: 14.0mm
  4. Stator Length: 7.0mm
  5. Shaft Diameter: 3.0mm
  6. Motor Dimensions (Dia.*Len): Φ18.3×16.0mm
  7. Weight (g): 14g
  8. of Cells(Lipo): 3-4S
  9. Max Continuous Current (A): 17.3A
  10. Max Continuous Power (W): 256.0W
  11. Internal resistance: 0.16Ω

BLHeli 20A Opto ESC

  1. BEC: OPTO
  2. Input voltage: 2-4s Lipo
  3. Signal Frequency: 20-500Hz
  4. Output PWM Frequency: 18KHz
  5. Come with BLHeli: Yes
  6. Application: Compatible with SimonK and BLHeli
  7. Dimensions (LxWxH): 23x12x4.5mm
  8. Weight: 12g (with wire)

4 x 4 x 3R Propellers

  1. Hi-Performance Prop FPV 3 blade bullnose propeller 4040 CW/CCW
  2. Material: PC
  3. Size: 4 x 4 x 3R
  4. Hub inner diameter(ID): M5
  5. Hub thickness: 7mm
  6. Weight: 3g/pcs
  7. Color: Green and Red

Package Includes :

4 x SE1407 3600KV CW CCWKV Brushless Motor
4 x Set of Motor Accessories
4 x BL20A BLheli firmware ESC
6 x  Propellers(3CW, 3CCW).

8,000₹  Inc Tax
DYS F1407 Drone Power Combo Set (Original)

Features:

SE1407 Motor

  1. New design with imported NMB bearing
  2. N52 magnet and 0.2mm lamination
  3. Powerful with 450g thrust to work with 4″ Prop
  4. Special design for the FPV racer champions

BL20A BLHeli firmware ESC

  1. Designed specifically for multi-rotors
  2. Tiny form factor and low weight
  3. Preloaded with BLHeli, OneShot125 & Dampened Light (active braking) supported
  4. Fast throttle response – high 500Hz maximum refresh rate compatible with all flight controllers
  5. Twisted signal cable reducing the crosstalk during signal transfer
  6. Feature all new ultra-low resistance MOSFETs for superior current handling
  7. Thick PCB for better heat dissipation
  8. High-performance capacitor filter

Tri-Blade Propellers

  1. Very strong, lightweight, and fast response
  2. Quick to release, quick to attach
  3. Good efficiency and Ultra-durable
  4. Compatible with SE1407 CW CCW motors
  5. Durable plastic construction provides both lightness and rigidity.
  6. New design propellers, with greater aerodynamic efficiency, good lifting capacity.

Specifications:

SE1407 Motor

  1. KV: 3600
  2. Configuration: NP
  3. Stator Diameter: 14.0mm
  4. Stator Length: 7.0mm
  5. Shaft Diameter: 3.0mm
  6. Motor Dimensions (Dia.*Len): Φ18.3×16.0mm
  7. Weight (g): 14g
  8. of Cells(Lipo): 3-4S
  9. Max Continuous Current (A): 17.3A
  10. Max Continuous Power (W): 256.0W
  11. Internal resistance: 0.16Ω

BLHeli 20A Opto ESC

  1. BEC: OPTO
  2. Input voltage: 2-4s Lipo
  3. Signal Frequency: 20-500Hz
  4. Output PWM Frequency: 18KHz
  5. Come with BLHeli: Yes
  6. Application: Compatible with SimonK and BLHeli
  7. Dimensions (LxWxH): 23x12x4.5mm
  8. Weight: 12g (with wire)

4 x 4 x 3R Propellers

  1. Hi-Performance Prop FPV 3 blade bullnose propeller 4040 CW/CCW
  2. Material: PC
  3. Size: 4 x 4 x 3R
  4. Hub inner diameter(ID): M5
  5. Hub thickness: 7mm
  6. Weight: 3g/pcs
  7. Color: Green and Red

Package Includes :

4 x SE1407 3600KV CW CCWKV Brushless Motor
4 x Set of Motor Accessories
4 x BL20A BLheli firmware ESC
6 x  Propellers(3CW, 3CCW).

8,000₹  Inc Tax
ARF Quadcopter Combo Kit

Package Includes :

1 x Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB
2 x EMAX MT2213 935KV BLDC Motor CCW With Prop1045 Combo (Original)
2 x EMAX MT2213 935KV BLDC Motor CW With Prop1045 Combo (Original)
4 x Emax BLHeli Series 30A ESC with Oneshot (Original)
1 x Pixhawk PX4 Autopilot PIX 2.4.8 32 Bit Flight Controller
1 x Ublox NEO-M8N High Precision GPS Built-in Compass for APM, AMP2.6, APM 2.8 and Pixhawk 2.4.6, Pixhawk 2.4.8
1 x UNIVERSAL GPS FOLDING ANTENNA BASE SET/BLACK
1 x Flysky FS-i6X 2.4GHz 10CH AFHDS 2A RC Transmitter With FS-iA10B 2.4GHz 10CH Receiver
1 x Orange 5200mAh 3S 40C/80C Lithium polymer battery Pack (LiPo)
1 x Lipo Voltage Checker 1-8S
1 x XT60 Male w/ 12AWG Silicon Wire 10cm (1pcs/bag)
4  x SafeConnect Flat 15CM 22AWG Servo Lead Extension (Futaba) Cable

38,000₹  Inc Tax
APM 2.8 Flight Controller kit with GPS Module Combo Kit

APM 2.8 Flight Controller 2.5 2.6 Upgraded Built-in Compass for FPV RC Drone Aircraft is the new APM 2.8 flight controller. The sensors are exactly the same as the APM 2.6 flight controller, however, this has the option to use the built-in compass, or external compass via a jumper. This makes the APM 2.8 ideal for use with multi-copters and rovers.

The universal vibration damping mount or shock absorber has a list of useful applications. This is free camera mounting to Flight controller isolation. It absorbs vibration, the center supported plate is ideal for sensitive electronics and cameras. The flush flat-bottom mounting allows bolt or tape style attachment.

A new generation Ublox GPS NEO-M8N, with low power consumption and high precision, the ultimate accuracy is 0.6 meters, actually almost 0.9 meters, greater than the previous generation NEO-7N 1.4-1.6 meters accuracy; support GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 protocol, and mode or more.

The GPS Folding Antenna Base mount comes will a laser cut adhesive pad to quickly attached your GPS module, while the mount itself can be fixed to your craft using the base plate M3 hole, or the cross slides.

The APM 2.5 Power Module is a simple way of providing your APM 2.5; with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable.


Package Includes :

1 x APM 2.8 Flight Controller.

2 x Connecting Wires.

1 x Glass Fiber Flight Controller Anti-vibration/Shock absorber Set.

1 x NEO-M8N GPS Module with translucent Shell.

1x GPS Folding Base Antenna set.

1 x APM 2.5.2/2.6/2.8 Pixhawk Power Module V1.0.

Specifications and Features :

APM 2.8 Flight Controller :

  1. Needle: straight.
  2. Power supply: LP2985-3.3.
  3. Max voltage: 16V.
  4. Add a 47uF tantalum capacitor.
  5. Port: MUX (UART0, UART2, mnnI2, and OSD are optional, OSD is the defaulted output).
  6. Arduino Compatible!
  7. Includes 3-axis gyro, accelerometer, along with a high-performance barometer
  8. Onboard 4 MegaByte Dataflash chip for automatic data logging.
  9. Optional off-board GPS, a uBlox LEA-6H module with Compass.
  10. One of the first open source autopilot systems to use Invensense’s 6 DoF Accelerometer/Gyro MPU-6000.
  11. Barometric pressure sensor upgraded to MS5611-01BA03, from Measurement Specialties.
  12. Atmel’s ATMEGA2560 and ATMEGA32U-2 chips for processing and USB functions respectively.

Glass Fiber Flight Controller Anti-vibration/Shock absorber Set :

Features:

  1. Color: Black
  2. Material: Glass fiber
  3. Suit for different open source flight controller, like APM 2.5/2.6/2.8, KK, MWC, and Pixhawk 2.4
Packaging Details:
  1. Package Weight: 24 gm.
  2. Upper Frame size:  90 x 60 x 2 mm(LxWxH).
  3. Lower Frame Size: 100 x 70 x 2 mm(LxWxH).
  4. Shock absorber Height: 10 x 12 mm.(DxH).

NEO-M8N GPS Module :

  1. Receiver type 72-channel u-blox M8 engine.
  2. GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1.
  3. SBAS L1 C/A: WAAS, EGNOS, MSAS.
  4. Galileo-ready E1B/C (NEO-M8N).
  5. Nav. update rate1 Single GNSS: up to 18 HZ.
  6. Concurrent GNSS: up to 10 Hz.
  7. Position accuracy2 2.0 m CEP.
  8. Acquisition2 Cold start: 26 s.
  9. Aided starts: 2 s.
  10. Reacquisition: 1.5 s.
  11. Sensitivity2 Tracking & Nav: –167 dBm.
  12. Cold start: –148 dBm.
  13. Hot starts: –156 dBm.
  14. Assistance AssistNow GNSS Online.
  15. Assist Now GNSS Offline (up to 35 days)3.
  16. Assist Now Autonomous (up to 6 days).
  17. OMA SUPL & 3GPP compliant
  18. Oscillator TCXO (NEO-M8N/Q).
  19. Crystal (NEO-M8M).
  20. RTC crystal Built-In.
  21. Noise figure On-chip LNA (NEO-M8M). Extra LNA for.
  22. lowest noise figure (NEO-M8N/Q).
  23. Anti-jamming Active CW detection and removal.
  24. Extra onboard SAW bandpass filter (NEO-M8N/Q).
  25. Memory ROM (NEO-M8M/Q) or Flash (NEO-M8N).
  26. Supported antennas Active and passive.
  27. Odometer Travelled distance.
  28. Data-logger For position, velocity, and time (NEO-M8N).

GPS Folding Base Antenna set :

  1. Material: CNC Aluminum alloy, carbon glass fiber rod
  2. Mounting rod diameter: 4mm
  3. length of rod: 14 cm.
  4. GPS plate diameter: 40 mm.
  5. Base plate diameter: 35 mm
  6. Mounting hole spacing: 16-35mm
  7. Weight: 20g
  8. Colour: Anodised black
  9. Note: Adhesive Pad is not included.

APM 2.5.2/2.6/2.8 Pixhawk Power Module V1.0 :

  1. Max input voltage: 28V
  2. Max current sensing: 90A
  3. Voltage and current measurement configured for 5V ADC
  4. Switching regulator outputs 5.3V and 3A max
  5. 6-pos DF13 cable plugs directly to APM 2.5’s ‘PM’ connector
  6. Support 6S battery
9,500₹  Inc Tax
X2 ELF 88MM Micro brushless racing kit

If you want to build your first drone model on your own, then this kit is for you. The kit includes everything you’ll need to create the best drone model possible as a beginner.

For someone new to the multirotor hobby, putting together your first quadcopter parts list and bringing them home can be extremely daunting. Trying to figure out what to buy and what parts will work together is tough, especially for people who don’t come from a background in radio-controlled planes or helicopters. For the people who want to build a quadcopter but don’t know where to start. It can be frustrating trying to sort things and figure out what to do.

X2 ELF 88MM Micro Brushless Racing Kit

This X2 ELF is a mini-Size Quadcopter Frame. This Frame is built Specially to tackle the Problems in Racing and Video recording with Quadcopter. This Frame is built with 3K carbon fiber and It has Good Electrical Properties and Good Tensile Strength.

This X2 ELF 88 mm Racing Drone Frame is made from 3K carbon fiber which makes it tough and durable. Carbon fiber is the most accepted material for frame designing because of its high stiffness to weight ratio. The Carbon Fiber Frames are very rigid and improve stability and flight performance. The frame is lightweight and possesses thick arms so it can give them good mechanical strength. The mini design gives the frame Aerodynamic efficiency.

This product has a wheelbase is about 88mm and weighs around 8 gm. It is featuring a large space in the mainframe for mounting the camera and other accessories.

8,500₹  Inc Tax
Robocat 270 Racing Quadcopter Frame
Robocat was designed with aerodynamics in mind. The carbon fiber we use allows us to create a sturdy but lightweight structure. For the Canopy, we took into account the ease of maintenance. The design incorporates a hinge feature allowing for easy access to the electronic insides.
With an eye-catching form paired with a streamlined Canopy, high speeds are achievable due to the low drag. The Canopy comes in different colors suitable for various situations. The Canopy is made from shock-absorbing PC material. If you have FPV racing on your mind, then this is the number one quadcopter for you.
Build from pure carbon fiber, 1.5mm thick fuselage & 3mm thick arms, Robocat 270 Racing Quadcopter Frame can be fitted with 1806 to 2206 sized motors, 12A speed controller, CC3D & Mini KK2.1 Flight controller, 3 to 4S 1500mah Lipo battery, 32mm CCTV Camera, 5.8G video Transmitter, 5 inches propeller.

Note: The cover on the frame comes in different colors, we will ship it according to availability.


Features:

  1. 270 size FPV racing quad frame
  2. Super tough and durable all 4k weave carbon fiber construction
  3. Eye-catching Lexan body shell design available in several colors
  4. Unique rotating frame design allows easy access to electronics
  5. Plenty of space for electronics and FPV equipment
  6. Individual component mounting options for a neat and tidy install
  7. Pre-angled FPV camera mount for high-speed flight

Package Includes:

1 x Robocat 270 Racing Quadcopter Frame

3,000₹  Inc Tax
QX 95 Quad-Copter Combo kit with Radiolink flight controller

Build your small indoor DIY done with this QX95 Quad-copter Combo Kit. This is QX95 Brushed Quad-copter Combo Kit will help you become a quadcopter pilot. Simply get out the soldering iron, put on your safety goggles, and began soldering. This kit has very good products and is available at an affordable cost.

For someone new to the multirotor hobby, putting together your first quadcopter parts list and bringing them home can be extremely daunting. Trying to figure out what to buy and what parts will work together is tough, especially for people who don’t come from a background in radio-controlled planes or helicopters. For the people who want to build a quadcopter but don’t know where to start. It can be frustrating trying to sort things and figure out what to do.

We’ve heard from a lot of people who are in similar positions and this bunch of products is designed to spell out exactly what you need for your quadcopter build. While we will recommend a complete list of specific parts that we have tested for a complete quadcopter build, the main purpose of providing a Brushed Quad-copter Combo Kit needed to build a quadcopter. Here’s what the kit contains

QX95 Brushed Quad-copter Frame

Every quadcopter or other multirotor aircraft needs a frame to house all the other components. Things to consider here are weight, size, and materials. This QX95 Brushed Quad-copter Frame is a well thought out brushed quad frame built from quality materials.

55mm (2.2inch) Blade Propeller Propeller for 6x15mm, 7x20mm 8.5x20mm Coreless Motor DIY Micro Quadcopter

These are 55mm (2.2inch) Blade Propeller Propeller for 6x15mm, 7x20mm 8.5x20mm Coreless Motor DIY Micro Quadcopter. The propellers with a 0.95mm mounting hole can be firmly mounted onto 1mm 4-axial motors.

8520 Magnetic Micro Coreless Motor for Micro Quadcopters – 2xCW & 2xCCW

If you are new in the multirotor/drone hobby area and want to try out some basic multirotor designs so as to enhance your basic knowledge about multirotor!!! Don’t wait and get this combo of 8520 Magnetic Micro Coreless Motor for Micro Quadcopters – 2xCW & 2xCCW.

 

2,700₹  Inc Tax
Mini MD90 90mm Racing Drone with Mini Flytower F3

This Mini MD90 90mm Racing Drone with Mini Flytower F3, Drone Power Combo Set is the best low price drone motors and accessories combo set available in the market.

If you are about to have a great flying drone or quadcopter designed all by you. OKAY GREAT, But having a limited budget ??

Then here is the best deal for you!!!!

It is a pack of Mini F3 or F4 flytower Flight controllers with a 5.8G 25mW Transmitter, 600TVL 170 degree color video mini camera with mic audio, 1104 7500kv motor, and MD90 Frame Kit with 2030 red propeller.

Features:

  1. 600TVL 170 degrees color video mini camera with mic audio
  2. 48 wireless channels transmitter
  3. 7500KV Brushless Motor
  4. Micro size and lightweight
  5. Easy installation for racing drone

Specifications:

Transmitter:

  1. Support video format: PAL
  2. Output Impedance: 50 Ohm
  3. Output signal strength: 13±1dbmdBm
  4. Output Power: 25mW
  5. Wireless Channel: 48CH
  6. Operating voltage: 5v
  7. Current: 100mA
  8. Frequency : 5 BAND 48CH 5645 ~ 5945 MHz

600TVL Camera:

  1. Horizontal Resolution : 600TVL
  2. Minimum illumination: 0LUX(LED ON)
  3. S/N ratio ≥48dB
  4. Gama:0.45
  5. Frame speed: 50f/s(PAL)
  6. White balance: Auto
  7. Audio out: Monophonic
  8. Video out: 1.2Vp-p 75Ω CVBS
  9. Image color: Color
  10. TV format: PAL
  11. Lens: 1.8mm Wide view angle 170 Degree
  12. IR Distance:1-3 Meters
  13. Working temperature: -10~ 50Degree C
  14. Input power : 5V(Module)/DC9-12V(With step-down AV cable)
  15. Power consumption :120mA

Mini 1104 7500KV Brushless Motor:

  1. KV: 7500KV
  2. Motor size: diameter 14*12.5
  3. Stator Diameter: 14mm
  4. Stator Length: 12.5mm
  5. Shaft Diameter: 1.5mm
  6. Motor Dimensions(Dia*Len): diameter 14*12.5mm
  7. No.of Cells(Lipo): 2-3S
  8. Max Continuous Current(A): 3.5A
  9. Max Continuous Power(W): 38.9W

MD90 frame:

  1. Wheel Base: 90mm
  2. Weight: about 19g
  3. Upper Board Thickness: 1.5 mm
  4. Bottom board Thickness: 2mm

Package Includes:

1 x MD90 Frame Kit
1 x set mini F3 or F4 Flytower Flight Controller
1 x 5.8G 25mW Transmitter
1 x 600TVL camera
4 x 1104 7500kv motor
4 x 2030 red propeller
10,000₹  Inc Tax
Mark4 carbon fiber frame kit

The Mark3 145mm Carbon Fiber Racing Frame. This frame is built specifically to tackle the problems in FPV Racing and video recording with quad-copters. It is known for its toughness and durability.

Carbon fiber is mostly an accepted material for frame designing because of its high stiffness to weight ratio. The Carbon Fiber Frames are very rigid and improve stability and flight performance. The frame is lightweight and possesses thick arms, so as to give them good mechanical strength.

Features:

  1. Compact size
  2. High performance
  3. Lightweight and Durable.
  4. Made by super strong and advanced engineering material.
  5. The frame has excellent strength.
  6. Equips vibration-free mounting bracket for FPV camera.
  7. This is DIY drone Frame Kit for your projects

Specifications:

  1. Wheelbase: 145mm
  2. Weight: 50G
  3. Material: Carbon Fiber
  4. Thickness: upper plate 2.0mm, side plate 2.0mm, bottom plate 2.0mm, splint 2.0mm, machine arm 4.0mm
  5. Paddle: 3.0 inch paddle
  6. Flight control hole distance: 20 x 20mm (M2)
  7. The distance between the rear image transmission holes: 20*20mm (M2)
  8. Camera installation width: 14mm
  9. Motor mounting holes: 9 x 9mm(M2), 12 x 12mm(M2)
  10. Adapt to the VISTA sky terminal
  11. Adapt 915 antenna

Packages Includes:

1 x Mark’3 145mm Carbon Fiber Frame Kit

3,500₹  Inc Tax
Mark’3 145mm Carbon Fiber Frame Kit

The Mark3 145mm Carbon Fiber Racing Frame. This frame is built specifically to tackle the problems in FPV Racing and video recording with quad-copters. It is known for its toughness and durability.

Carbon fiber is mostly an accepted material for frame designing because of its high stiffness to weight ratio. The Carbon Fiber Frames are very rigid and improve stability and flight performance. The frame is lightweight and possesses thick arms, so as to give them good mechanical strength.

Features:

  1. Compact size
  2. High performance
  3. Lightweight and Durable.
  4. Made by super strong and advanced engineering material.
  5. The frame has excellent strength.
  6. Equips vibration-free mounting bracket for FPV camera.
  7. This is DIY drone Frame Kit for your projects

Specifications:

  1. Wheelbase: 145mm
  2. Weight: 50G
  3. Material: Carbon Fiber
  4. Thickness: upper plate 2.0mm, side plate 2.0mm, bottom plate 2.0mm, splint 2.0mm, machine arm 4.0mm
  5. Paddle: 3.0 inch paddle
  6. Flight control hole distance: 20 x 20mm (M2)
  7. The distance between the rear image transmission holes: 20*20mm (M2)
  8. Camera installation width: 14mm
  9. Motor mounting holes: 9 x 9mm(M2), 12 x 12mm(M2)
  10. Adapt to the VISTA sky terminal
  11. Adapt 915 antenna

Packages Includes:

1 x Mark’3 145mm Carbon Fiber Frame Kit

3,000₹  Inc Tax
IX2 90mm Micro FPV Racing kit

If you want to build your first drone model on your own, then this kit is for you. The kit includes everything you’ll need to create the best drone model possible as a beginner.

For someone new to the multirotor hobby, putting together your first quadcopter parts list and bringing them home can be extremely daunting. Trying to figure out what to buy and what parts will work together is tough, especially for people who don’t come from a background in radio-controlled planes or helicopters. For the people who want to build a quadcopter but don’t know where to start. It can be frustrating trying to sort things and figure out what to do.

IX2 90mm Micro FPV Racing Kit

This IX2 90mm Micro FPV Racing Drone Frame. This Frame is built Specially to tackle the Problems in Racing and Video recording with Quadcopter. This Frame is built with carbon fiber and It has Good Electrical Properties and Good Tensile Strength. The IX2 90mm Micro FPV Racing Drone Frame is composed of carbon fiber, making it strong and long-lasting because of its excellent rigidity to weight ratio, carbon fiber is the most used material for the frame design. Carbon Fiber Frames are extremely stiff, which improves flight stability and performance. The wheelbase of this product is approximately 90mm. It has a huge space in the mainframe where the camera and other accessories can be mounted. The frame is light and has substantial arms, allowing it to provide strong mechanical strength. The frame’s aerodynamic efficiency is enhanced by the small design.

10,000₹  Inc Tax
HSKRC 3 Inch 140mm Carbon Fiber Racing Kit

If you want to build your first drone model on your own, then this kit is for you. The kit includes everything you’ll need to create the best drone model possible as a beginner.

For someone new to the multirotor hobby, putting together your first quadcopter parts list and bringing them home can be extremely daunting. Trying to figure out what to buy and what parts will work together is tough, especially for people who don’t come from a background in radio-controlled planes or helicopters. For the people who want to build a quadcopter but don’t know where to start. It can be frustrating trying to sort things and figure out what to do.

HSKRC 3 Inch 140mm Carbon Fiber Racing Kit

The HKSRC 3 inch 140 mm Frame was designed specifically to address the challenges of quadcopter racing and video recording. The frame is made of carbon fiber and has excellent electrical and tensile properties. This HSKRC 3 Inch 140mm Carbon Fiber Racing Drone Frame is made from carbon fiber which makes it tough and durable. The frame is light and has thick arms, allowing it to provide good mechanical strength. The frame’s aerodynamic efficiency is enhanced by the mini design. It has a wheelbase is about 140 mm. It is featuring a large space in the mainframe for mounting the camera and other accessories.

14,000₹  Inc Tax
Capro-X’3 HX155mm FPV Racing Kit

If you want to build your first drone model on your own, then this kit is for you. The kit includes everything you’ll need to create the best drone model possible as a beginner.

For someone new to the multirotor hobby, putting together your first quadcopter parts list and bringing them home can be extremely daunting. Trying to figure out what to buy and what parts will work together is tough, especially for people who don’t come from a background in radio-controlled planes or helicopters. For the people who want to build a quadcopter but don’t know where to start. It can be frustrating trying to sort things and figure out what to do.

Package Includes;

1 x Capro- X’3 HX155mm FPV Racing Kit

Kit Includes:

1 x Capro-X’3 HX155mm FPV Racing Drone Frame with Prop Protectors
1 x Fitting  Bolts and stand off set 
1 x Mini Flytower F4 OSD Flight Controller

1 x CMOS 1/3 700TVL 1.2 mm FPV Camera 
1 x XF5805 V6.1 5.8G FPV transmitter
1 x 5.8G 5 dBi Micro Antenna with RP-SMA Connector for XF5805

1 x 2S~3S 4in1 Brushless ESC for 3800KV Brushless Motor
2 x Ready to Sky 3800KV Brushless Motor-CW 
2 x Ready to Sky 3800KV Brushless Motor-CCW
4 x 3045 Tri-Blade Propellor(2 x CW 2 x CCW)-Black
4 x 3045 Tri-Blade Propellor(2 x CW 2 x CCW)-Red

1 x Brackets, Damping Pad and Accesories Set

15,000₹  Inc Tax
Assassin 5 inch 222mm Drone Racing frame Kit

Features:

  1. Lightweight and Durable.
  2. Made by super strong and advanced engineering material.
  3. The frame has excellent strength.
  4. Equips vibration-free mounting bracket for FPV camera.

Package Includes:

1 x Assassin 5 inch 222mm Drone Racing frame Kit

Kit Includes:

1 x Assassin 5 inch 222mm Drone Racing frame and Accessories

1 x black zip ties(10 pcs)

4,000₹  Inc Tax
Per Page      1 - 20 of 22