Ultrasonic Sensor

Most Waterproof Ultrasonic Sensor Module aren’t waterproof which can be a problem if you need your project to withstand the elements outdoors. No need to worry anymore! We have developed waterproof & ultrasonic distance sensors with a waterproof sealed emitter. This sensor is suitable for outdoor applications such as car reversing sensors, security alarms, industrial inspection, etc.

This module is easy to use. A control port sends a high level above 10US, so you can wait for the high-level output at the receiving port. You can turn on the timer when there is an output. When this port goes low, you can read it. The value of the timer, at this time, is the time of the distance measurement, in order to calculate the distance. Such continuous cycle measurement, that is, you can reach the value of your mobile measurement.

1. Horizontal ranging.
2. Obstacle avoidance, automatic control.
3. Objects are close, there is awareness.
4. Traffic control.
5. Security, industrial control.
6. Artificial intelligence, teaching, and research.

Features:

1. Small size and easy to use.
2. Low voltage and low power consumption.
3. High measurement accuracy.
4. Strong anti-interference.
5. Integrated enclosed waterproof line probe for wet and harsh measurement applications.

This is an Ultrasonic Sensor, Transceiver, 16 mm Diameter, 40 kHz, -74 dB, Plastic, Black, -30 degree C to 85 degrees C product from MULTICOMP pro with the model number MCUSD16P40B12RO

Features:

1. Open structure and dual-use
2.  Compact and lightweight
3.  High sensitivity and sound pressure
4.  Less power consumption
5. High reliability

Specifications:

1. Construction: Open struct
2. Using Method: Dual Use
3. Frequency: 40 ± 1kKz
4. Transmitting Sound Pressure Level: min. 112dB (30cm/10V rms Sine Wave)
5. Receive Sensitive: min-74dB/V/ μbar
6. -6dB Directivity: 50°
7. Aftershock Time: max. 1.5ms
8. Sensitivity Distance: 0.6m to 16m
9. Capacitance: 3,000pF 20% at1kHz
10. Soldering conditions: 350°C to 400°C
11. Operating Temperature. Range: -30°C to 85°C
12. Allowable Input Voltage: 120Vp-p (40kHz)
13. Housing Material: Plastic

UNIT SONIC IO is a GPIO interface ultrasonic range sensor. This module features an RCWL-9620 ultrasonic distance measurement chip with a 16mm probe, which the ranging accuracy can reach 2cm-450cm (accuracy up to ±2%). This sensor determines the distance to a target by measuring time lapses between the transmitting and receiving of the pulse signal, users can directly obtain the distance value through IO control mode. It is ideal to apply in robotics obstacle avoidance, fluid level detection, and other applications that require you to perform measurements.

Features:

1. RCWL-9620
2. GPIO communication interface
3. Measuring range: 2cm-450cm
4. Protective housing
5. Built-in temperature compensation reduces the temperature drift
6. Support UIFlow platform

Specifications:

1. Ultrasonic Ranging Single Chip: RCWL-9620
2. Range: 2cm-450cm
3. Probe Specifications: 16mm
4. Receiving/Transmitting Frequency: 40KHz
5. Receiving sensitivity: -65dB
6. Pointing angle: 60°
7. Measurement accuracy: ±2%
8. Measurement period: 50ms
9. Working current: 3mA

Features of the MB1001, ParkSonar-EZ-72, include one-inch resolution, both proximity and range information for the nearest detectable target, and various output options: high/low logic level and RS232 serial.

The ParkSonar‑EZ line is designed to detect vehicles within a calibrated detection zone. The ParkSonar-EZ proximity sensors report when a vehicle, or other detectable target, enters the detection zone. The target is released after leaving the ParkSonar-EZ’s detection zone.

The MB1001 has a detection zone of ~6 feet. The MB1001 will allow for 14 simultaneous sensors depending on sensor mounting and environment.

Applications: 

1. Vehicle Detection Sensor
2. Parked car detection
3. Proximity zone detection
4. Sheltered drive thru’s
5. Non-condensing environments only
6. Designed for protected indoor environments
7. Other weather resistant models available2

Features: 

1. Automatic multi-sensor operation
2. RoHS Compliant
3. Small, light weight module
4. Designed for easy integration into your project or product
5. Mounting holes provided on the circuit board (or can be grommet mounted)
6. Very low power proximity sensor, excellent for multiple sensor or battery based systems
7. Continuously gives output which frees up user processors
8. User can choose either of the two sensor outputs
9. Runs automatically or can be triggered externally
10. Fast measurement cycle

Specifications: 

1. Operates voltage: 2.5 and 5.5V
2. Current: 2.0mA
3. Resolution: 1 inch
4. Target acquire time: ~10 second
5. Target release time: ~5 second
6. Maximum reported range: 254 inches (645 cm)
7. Choice of 2 digital outputs: Logic Level (High/Low) and RS232 serial
8. Ultrasonic sensor measures distance to objects: 42kHz
9. Virtually no sensor dead zone: objects closer than 6 inches typically range as 6 inches
10. Proximity Detection zone: 6 feet (72 inches)

Features: 

1. Come with a driver
2. Power-ON trigger work
3. 108KHz high frequency oscillator
4. Micron level aperture
5. Glazed surface of atomized sheet

Specification:

1. Product name: 108KHz 20mm USB Humidifier
   
2. Work Voltage:DC 4.5V~5.0V
   
3. Work Power:2W
   
4. Work Frequency:108KHz( /-3KHz)
   
5. Power Type:Female USB Socket
   
6. Diameter without rubber ring:16mm
   
7. Diameter with rubber ring:20mm
   
8. Spray Diameter:5um
   
9. Spray hole:740 holes
   
10. Spray speed:50ml/h
    
11. Work Temperature:0℃~85℃
    
12. Work Humidity:10%~90%RH
    
13. Driver Size:35*19*15mm

Buy this powerful DC 24V Ultrasonic Humidifier device suitable for atomization with a plate diameter of 10 mm.  It is mostly in demand for fish pot and decoration purposes in households. It’s a simple plug-and-play module in which you just have to deep down the module in water and Supply 24 volt DC supply directly from the battery or power supply Adapter and it will start working.

Additionally, this 24v 12 Colourful LED Ultrasonic Humidifier 12 LED Mist Maker Fogger comes with 12 Waterproof LED with 3 different colours glowing alternately which adds the colourful mist to your decoration

The fully waterproof module has a 5mm DC female jack to connect the 24V input power supply with a 1-meter long cable.

Instruction to use:

1. Deep the module in the water keeping 4 to 5 cm water level above the device
2. Connect the power supply of 24V DC 1AMP and enjoy the fog.
3. Use power supply at least with 1AMP output for best performance
4. Do not deep it in water more than 5cm for maximum fog output.

How does it work?

Ultrasonic Humidifier Piezoelectric Transmitter module works on the principle of cavitation produced by sound waves. Just provide the power supply it will turn into an altimate ultrasonic atomizer.

Features:

1. Huge amount of humidification
   • High-frequency vibration produces 350ml of mist per minute, humidifying all-day
2. Wide Application
   • Supporting use bonsai crafts, fish tank water tanks, DIY crafts and ect.
3. Self-contained water level sensor
   • Automatically power off with water shortage to prevent burning of the atomizer