Vibration/Tilt Sensor and Modules

The vibration sensor is also called a piezoelectric sensor. These sensors are flexible devices that are used for measuring various processes. This sensor uses the piezoelectric effects while measuring the changes within acceleration, pressure, temperature, force otherwise strain by changing to an electrical charge. The vibration analysis is used as a tool to determine equipment condition as well as the specific location and type of problems. The sensor output is an AC signal proportional to the vibration of the structure at the mounting point of the sensor. You will find the sensor at a very low price with good quality.

Sort By:  
Vibration sensor module alarm Motion sensor module vibration switch SW-420

Vibration sensor module alarm Motion sensor module vibration switch SW-420 module based on the vibration sensor SW-420 and Comparator LM393 to detect if there is any vibration that beyond the threshold. The threshold can adjust using an onboard potentiometer. When this no vibration, this module output logic LOW the signal indicates LED light, and vice versa.

If the module does not vibrate, the vibration switch was on the close state, the output of low output, the green indicator light. The product vibrates, vibration switches momentary disconnect, the output is driven high, the green light does not shine.

The output can connect to the microcontroller, which to detect high and low level; so as to detect whether the environment exists vibration, play a role in the alarm.

1,800₹  Inc Tax
Piezo Vibration Sensor

Grove- Piezo Vibration Sensor is suitable for measurements of flexibility, vibration, impact, and touch. The module is based on PZT film sensor LDT0-028. When the sensor moves back and forth, a certain voltage will be created by the voltage comparator inside of it.

Therefore, outputs high & low levels. In spite of the fact that it has a high receptivity for strong impacts, a wide dynamic range (0.001Hz~1000MHz) also guarantees excellent measuring performance. Finally, you can adjust its sensitivity by adjusting the potentiometer with a screw.


Features:

  1. Standard grove socket
  2. Wide dynamic range:0.001Hz~1000MHz
  3. Adjustable sensitivity
  4. High receptivity for strong impact

Applications:

  1. Vibration Sensing in Washing Machine
  2. Low Power Wake-up Switch
  3. Low-Cost Vibration Sensing
  4. Car Alarms
  5. Body Movement
  6. Security Systems
1,000₹  Inc Tax
Normally open vibration sensor module

This Normally open vibration sensor module is for a variety of vibration trigger function, reported theft alarm, smart car, electronic building blocks and so on. Please note that Normally open vibration sensor module in the induction of a small vibration when the trigger time is very short, not enough to drive the relay, some of the information display can be directly connected to the relay module, the actual use of ineffective.

When the product does not shake, the vibration switch is held in off state, the output is high and the green light does not shine and when the product vibrates, the vibration switch goes in momentary conduction mode, the output end of the output goes low and the green indicator light-up.

Output can be directly connected to the microcontroller through the microcontroller to detect high and low levels, thus to detect whether there is a vibration of the environment, play an alarming role.

400₹  Inc Tax
Magic Cup Tilt Switch Module

Magic Light Cup Module is a board which has a led and a mercury tilt switch. Using PWM to drive the LEDs on the module you can achieve the effect of light being “magically” transferred from one module to the other when tilting them. In short, it’s 2 components combined, a mercury tilt switch and a led. On tilting the module mercury inside small tube connect the switching point and make switch ON while tilting it to other side move the mercury and it disconnects the circuit and switch get OFF. The module operates on 5V DC supply.

So the magic in the name of this module is because when you tilt the switch, the led will turn on and off. And Of course, it is also possible to connect it to the NodeMCU.

Pin Connection with Arduino:
  1. G: GND
  2. :  5v DC
  3. S:  Arduino pin 8
  4. L: Arduino pin 9
Pin Connection with Node MCU:
  1. Connect G to a GND port of your NodeMCU
  2. Connect to a 3.3v port of your NodeMCU
  3. Connect S to a digital port on your NodeMCU (in my example port D3)
  4. Connect L to a digital port on your NodeMCU (in my example port D5)
550₹  Inc Tax
801S Vibration Shock Sensor Module

This 801S module changes its resistance level once vibration is detected. It can turn into a switch if the vibration is high. According to the datasheet, it is gold-plated and can withstand 60 million shocks. This module is connected in a voltage divider which can be measured through its digital pinout. It’s a high sensitivity 801S Vibration Sensor module, which has one digital output pin(D0), When it detects some vibration up to a certain threshold, it can output High or Low level.

Comparing with other vibration or shock sensor, this 801S type has the following listed features:

  1. This Vibration sensor is based on the Hi high precision vibration sensor 801S
  2. it has 1 digital output
  3. The sensitivity of TTL output can be adjusted by the on-board potentiometer, you can also read the digital output with any ADC to get the vibration condition.

The 801S shock and vibration sensor, by itself, changes its resistance when subjected to vibrations. The resistance changes are so extreme that the 801S is like a switch. The datasheet claims that this gold plated device can withstand 60 million shocks. As with most resistance-varying devices, the 801S is connected in a voltage divider circuit to get a voltage output.


Features :

  1. Micro-Shock detecting
  2. 60,000,000 times shock guarantee (special gold alloy plated)
  3. Has a signal output instruction
  4. Digital output signal
  5. The output valid signal is high, the light goes out
  6. The sensitivity is adjustable (fine-tuning)
  7. The wide detection range of vibration, no direction
  8. With mounting holes, firmware installation is flexible and convenient.

Tutorial :

801S Vibration Sensor Tutorial


Package Includes :

1 x 801S Vibration Shock Sensor Module

700₹  Inc Tax
2 Channel Tilt Sensor Module

The tilt sensor module comes with the basic components for operation. Supplying power and it is good to be used. Attach it to object and it will detect whether the object is tilted. Simple usage as it is a digital output, so you will know the object is tilted or not by reading the output. It uses SW-460D or SW-520D tilt sensor. The tilt sensor is a ball rolling type.

It comes with an M3 mounting hole for ease of attaching it to any object. It provides a tilt switch, high sensitivity and commonly being used for tilt detection. The module comes with a power LED and a status LED for a visual indicator.

The module will output logic LOW when the module is not tilted until the threshold angle; it will output logic HIGH when it is tilted over the threshold angle. We have tested, the tilt angle is quite big, from 45 degrees to 130 degrees. However, it depends on the angular velocity too. It can be used as a vibration sensor too.

The output can be directly connected with the MCU, through the microcontroller to detect level, thereby detecting the environment change of angle. It can be interfaced with any microcontroller with digital input such as PIC, Arduino series for tilt detection capability.


Features:

  1. Operating voltage 3.3V-12V
  2. The output in the form: Digital switching outputs (0 and 1)
  3. A fixed bolt hole for easy installation
  4. Small board PCB size: 3.2cm x 1.7cm
  5. Wide voltage LM393 comparator
  6. Maximum output current: 15mA
  7. Can work on low voltages
  8. Maximum operating temperature: 0°C to 80°C
  9. Easy interface
  10. Long life.

Package Includes:

1 x 2 Channel Tilt Sensor Module

2,699₹  Inc Tax
Waveshare Tilt Sensor

This tilt sensor module is used for inclination indication. It is based on a mercury switch that contains a blob of mercury. When the body moves to a specific angle (usually around 30°), it shorts two pins and thus closes the circuit and tilt is detected and the signal output is high.

The simplicity of this sensor makes them popular for toys, motion detection alarms, gadgets and appliances.

Application:

  1. Shake detection
  2. Guard alarm
  3. Smart car
  4. Electric bricks

Features: 

  1. Detects shake signal
  2. Signal output indicator

Package Includes:

1 x Tilt Sensor
1 x 3-pin custom connector jumper wire

599₹  Inc Tax
DFRobot Gravity: Digital Shake Sensor

DFrobot offers an advanced level of sensors at an affordable cost than any other competitor brand in the market, making them ideal for the one who wants to start some Projects through Different types of sensors.

After finding Different types of sensors on market, we at robu.in have determined that DFrobot is one of the good brands that offer a wide range of sensors at an Appropriate price.

Do you want to switch lights by just shaking your hand? However, you may don’t want to use a complicated and costly triple-axis accelerometer. This digital shake sensor is sure to meet your needs.

The digital shake sensor is to detect handshaking which is only sensitive to unidirectional hand movements. The spring-type vibration switch is used to output a low-level pulse when the user shakes once in the specified direction and the onboard indicator flashes at the same time. Thanks to the unidirectional sensitivity of the vibration switch and the corresponding filter circuit, it has a strong anti-shock interference capability to prevent false triggering. Simple and easy, switch controls are all in just a single shake.

799₹  Inc Tax
DFRobot Gravity Flexible Piezo Film Vibration Sensor

They are used for measuring fluctuating accelerations or speeds or for normal vibration measurement. Maintenance professionals use the sensors in order to predict the maintenance of the machinery, to reduce overall costs and increase the performance of the machinery,  The vibration levels can be supplied to any controllers/processors/ and necessary decisions can be obtained as required though it, This module has triple output mode i.e. – digital output – is simple, analog output which is more accurate and serial output with exact readings. The generally 3 types of vibration sensors are  there 1) displacement sensors, 2) velocity sensors, 3) accelerometers. Accelerometers are the best choice for most industrial rotating assets because they are simple, easy to apply, and very sensitive to the high-frequency vibrations typically generated during force-failure.

Applications:

  1.  food & beverage.
  2. mining.
  3. metalworking.
  4. gas & oil, paper.
  5. wind power.
  6. power generation.

Features:

  1. Standard assembling structure (Times-of-5mm Center distance between two 3mm mounting holes).
  2. Easily precognitive interfaces of sensors (“A” for analog and “D” for digital).
  3. Icons to simplify illustrate sensor function .
  4. Low Cost.
  5. High quality connector.
  6. Immersion gold surface.

Specifications:

  1. IO Type: Digital.
  2. Switch life: up to 10 million seconds.
  3. Open circuit resistance: 10Mohm.
  4. Supply Voltage: 3.3V to 5V.
  5. Interface: Digital.
  6. Size:22x30mm (0.87 x 1.18 in).

Packages Includes:

1 x DF Robot Gravity Digital Vibration Sensor.

1,000₹  Inc Tax
DFRobot Gravity Digital Vibration Sensor

They are used for measuring fluctuating accelerations or speeds or for normal vibration measurement. Maintenance professionals use the sensors in order to predict the maintenance of the machinery, to reduce overall costs and increase the performance of the machinery,  The vibration levels can be supplied to any controllers/processors/ and necessary decisions can be obtained as required though it, This module has triple output mode i.e. – digital output – is simple, analog output which is more accurate and serial output with exact readings. The generally 3 types of vibration sensors are  there 1) displacement sensors, 2) velocity sensors, 3) accelerometers. Accelerometers are the best choice for most industrial rotating assets because they are simple, easy to apply, and very sensitive to the high-frequency vibrations typically generated during force-failure.

Applications:

  1.  food & beverage.
  2. mining.
  3. metalworking.
  4. gas & oil, paper.
  5. wind power.
  6. power generation.

Features:

  1. Standard assembling structure (Times-of-5mm Center distance between two 3mm mounting holes).
  2. Easily precognitive interfaces of sensors (“A” for analog and “D” for digital).
  3. Icons to simplify illustrate sensor function .
  4. Low Cost.
  5. High quality connector.
  6. Immersion gold surface.

Specifications:

  1. IO Type: Digital.
  2. Switch life: up to 10 million seconds.
  3. Open circuit resistance: 10Mohm.
  4. Supply Voltage: 3.3V to 5V.
  5. Interface: Digital.
  6. Size:22x30mm (0.87 x 1.18 in).

Packages Includes:

1 x DF Robot Gravity Digital Vibration Sensor.

500₹  Inc Tax
COMUS Tilt Switch, 15 °, 60 Vac, 0.25 A, Nickel

The CW1300-1 from Comus is a nonmercury tilt sensor. These operate when tilted from the horizontal position. The switch movement required to cause contact change is called the differential angle. It is very important when designing a tilt switch to allow the differential angle and understand that when in the horizontal position the switch contact may be open or closed.


Features:

  1. Resistant to Ambient Environmental Conditions
  2. Case Material Tin Plated
  3.  Hermetically Sealed & Inert Gas Filled
  4.  Customization Available

Specifications:

  1. Contact Capacity: 60 V MAX, 0.25 A MAX, 3 VA MAX
  2. Contact Resistance: 30 Ω MAX Measured 10° Below Horizontal at 5 VDC
  3. Make Angle: 10° MAX Below Horizontal
  4. Break Angle: 10° MAX Above Horizontal
  5. Differential Angle: 15° MAX
  6. Operating Temperature: -37° to 100°C

Package Includes:

1 x COMUS Tilt Switch, 15 °, 60 Vac, 0.25 A, Nickel

500₹  Inc Tax
Per Page      1 - 11 of 11
  • 1